Three ways the installation could still end up with its source, its binary and
the operator's content describing different things.
Rollback copied aside only *tracked* protected files, so a role upstream had
deleted and the operator had recreated at the same path was untracked - and
`git reset --hard` wrote the old commit's copy over it. The stash now also
covers untracked protected paths the target commit writes to, and names them in
keptContent like any other file it saved.
The pending-build marker said only "a compile is owed". An update that found
new commits therefore merged them and built the *new* tree, leaving `.prev`
holding a binary for a commit the state file no longer named - a rollback then
paired old source with the original binary. And a marker left behind after a
successful swap rebuilt and overwrote that same `.prev`. The marker now names
its target commit and the hashes on both sides of the swap, the state records
which commit the live binary came from, an owed build is finished before the
tree moves again, and a retry that finds the swap already done clears the
marker instead of repeating it. Rollback verifies that pairing before touching
anything and refuses (binary_changed) rather than reset the source beside a
binary it cannot account for; an update whose build failed never swapped one,
so its rollback moves the source only and no longer demands a `.prev`.
The version pair is recorded before the config is written, so a crash in
between still leaves a rollback that can put the old number back.
The repository's config.example.yaml ships the release version this code was cut
from (upstream bumps it in the release commit: v1.7.21's config.example says
v1.7.21), while the live config.yaml is operator data that no merge ever touches.
So after an update the header badge - and the ?v= on every static asset - kept
saying the version the installation was born with while the tree already ran
newer code.
An update, an adoption, or a rollback now keeps the two together: after the merge
the update reads the version the new code carries (config.example.yaml) and writes
it into the live config's version field - that one line, temp file plus atomic
rename, everything else byte-for-byte preserved, and only when the value actually
differs. The job log records the change (the page shows the step), and the state
file records both numbers so a rollback puts the old version back with the old
code; a number hand-edited after the update is the operator's and is left alone.
The side effect worth naming: the version bump also changes the ?v= query on
static assets, so a browser stops serving the pre-update JavaScript.
Trees without a live config or without a shipped version are left untouched -
a source checkout has nothing to sync, and nothing is ever guessed.
internal/config gains the two focused helpers (FileVersion / WriteVersion, line
level like the tarball upgrade path always did); tests pin the replace, the
insert-when-absent, byte preservation, the mode, the malformed-value refusal, and
the update/adopt/rollback/leave-alone behaviours end to end.
The update source used to be three things - a remote name or an address, plus an
optional branch - and unset it followed whatever this directory's remotes and
upstream happened to say. That asked people to understand git topology before
they could update, and the person it was built for could not tell what "follow
the remote this tree tracks" meant. It is now one field: config.yaml update.repo,
an address, empty meaning the official repository
(https://github.com/AIPentest/CyberStrikeAI.git). Point it at a mirror (GitHub is
hard to reach in some places) or at your own fork and that is the whole
configuration.
The branch nothing is any more: an update follows the source repository's own
default branch, resolved from the source itself (ls-remote --symref HEAD), so a
fork whose default is not "main" still works and nobody has to name a branch.
Remote names, the mine/origin/upstream ranking, @{upstream} tracking and the
adopt flow's branch argument are all gone with it.
The console page loses two input fields: the source section is one address, a
hint that empty means the official repository, and a save button; clearing the
address is the way back to the default. The install facts drop the remote name,
the check section shows the source's default branch once the network answer
arrives, and the adopt entry no longer requires saving an address first - the
official default makes connecting a tarball install a zero-configuration action.
The CLI now reads the same update.repo field the page saves (LoadUpdateRepo reads
just that field, without validating the rest of the file - a broken unrelated
section must not block the path that fixes the tree), so the keyboard and the
button cannot update from different repositories. -check-update prints the source
it is about to use.
Tests: the source suite now pins the default (official), the single-address save
(including the empty-string reset), and that the followed branch comes from the
source's own default branch rather than a hardcoded "main"; the console suite
posts the one field and renders the default hint; docs, config.example.yaml and
upgrade.sh describe the one-field story.
The console now knows what it is running: the status endpoint compares the binary
identity captured at startup (size + nanosecond mtime) with the file on disk, so
an update, a rollback or a CLI run that swapped the binary without a restart is
reported as needsRestart (with the build time) - a state that used to live only in
one job's result and vanished with the process. That state grows a persistent
banner and POST /api/system/update/restart (409 when there is nothing to activate
or a job owns the tree, 400 without a hook), so a forgotten tick is one click
instead of a shell login.
The restart tick defaults to on exactly where it is safe: launchd/systemd leave
markers in the environment (XPC_SERVICE_NAME, INVOCATION_ID/JOURNAL_STREAM) and
the box follows them; an operator's own choice is never second-guessed afterwards.
While the process is down the console becomes a recovery view that probes the
status endpoint every 2 seconds: 200 means the old process still answers, a dead
socket means it is on its way out, and a 401 - only a new process can fail to know
the session - reloads the page back to #system-update. A job poll that dies during
a requested restart is the restart in flight, not a failure to toast.
Also fixed: updateT now asks i18next not to escape interpolated values, because
the console escapes at render time - the apply confirm dialog has been showing
branch names with / ever since they contained a slash, and the new banner
showed dates the same way.
Tests: 7 new console contract tests (36 total: banner, tick default, restart
confirm/refusal, watchdog 200-vs-401, timeout copy, the in-flight poll death) plus
handler tests for the stamp and the endpoint, all mutation-probed; docs describe
the pending-restart state and the self-recovery.
The update console stops being a page of its own and becomes the last section
of 系统设置 (data-section="update", gated by update:read): the sidebar entry
and page-system-update are gone, the console markup lives in
settings-section-update, and the settings menu is where an operator now finds
it. #system-update keeps working as an alias - both hash parsers normalize it
to settings + the update section - so existing deep links and docs keep landing.
Polling follows the new home: leaving the settings page (router) or switching
to another section (settings.js) stops it, selecting the section loads the
console, and returning to the settings page with the section still selected
re-reads the install tree and re-arms the poller (a frozen progress read is
the "nothing is happening" picture an operator must never be shown).
The guard suite follows the move: the old nav/page assertions become "must not
exist", the new ones pin the section, the alias, the poller handoff and the
retired nav.systemUpdate key (settings.nav.update replaces it in zh/EN/RU).
README and both developer/deployment guides say 系统设置 → 一键更新.
The console page grows an update-source section: what is in effect and where it
comes from (config.yaml or the tree's own tracking), an edit form for the three
fields, and - for a directory that is not a git installation - the adopt entry.
Adopt is preview-first: the plan lists what would be replaced and what would be
kept, the confirm dialog carries the counts, and the restart tick is the same one
an update uses. A refused save shows the server's own sentence (a remote name and
an address together, an ext:: address) instead of a generic failure, and the typed
values survive the failed save and the polling redraws.
zh/EN/RU dictionaries carry the 27 new keys; the console page's contract tests
grow to 29 (source rendering and save body, the refusal path, adopt gating by
installation kind, preview-then-confirm); docs/README describe choosing a source
and connecting an unpacked installation.
An operator running a fork has no honest way to upgrade: upgrade.sh downloads the
Release tarball of one hard-coded third-party repository and rsyncs it over the
tree, so "upgrade" means "overwrite yourself with somebody else's code", and the
safe alternative is to pull by hand and remember the build command.
internal/update drives the remote the directory already tracks: fetch, fast-forward,
go build into .update-staging, atomic rename of the binary (the previous one kept as
cyberstrike-ai.prev), and a .update-state.json so a rollback has a target that is
not guessed at. Refusals are the point - local source edits and a diverged branch
stop with the file names and commit counts in the error rather than being reset to
match, and operator-owned content (roles/skills/tools/agents/data/config.yaml) is put
aside before the merge and restored over it, with what was kept listed in keptContent
instead of quietly dropped.
Consumers: GET/POST /api/system/update* behind update:read / update:apply (mutations
are process-global, so they need a global-scope session); a console page at
#system-update with an apply button that names why it is blocked, a job polled from
the server and a rollback control; the same three actions as -check-update / -update
/ -update-rollback on the binary; OpenAPI entries for all five endpoints. Permission
gating no longer re-enables a control a page disabled for a reason of its own
(data-state-disabled), which every state-disabled, permission-gated button in the
console was subject to. upgrade.sh becomes a thin shell over the same implementation
and only falls back to the tarball path for installs that are not git work trees.
Docs and the zh/EN/RU dictionaries are updated. The package runs 13 tests against
real temporary git repositories; the HTTP layer, RBAC and the console page each
carry their own contract tests.
Runtime artifacts (agent workspaces, tool-output spill, C2 payloads, chat
uploads, workflow checkpoints, diagnostic logs) previously accumulated
without bound: most were only removed when a conversation or project was
deleted, and tmp/c2 plus workflow checkpoints were never removed at all.
Add a storage cleaner with named per-category tasks (Gitea-style), a
settings page tab, and a background sweep that is off by default so
upgrading never deletes existing data.
Safety properties, since mis-deleting live task data costs far more than
the disk saved:
- dry-run is the default; a real cleanup requires dry_run=false together
with confirm=true at the API layer, not just a frontend dialog
- sessions active within active_grace_hours are always skipped, and a
failed activity lookup skips conservatively (fail closed)
- directories whose conversation/project no longer exists are reclaimed
as orphans after orphan_grace_days
- scanners never follow symlinks and every candidate path is confined to
its category root; deletion renames to a .tmp-for-deletion marker first
so a crash leaves recoverable residue instead of a half-deleted dir
- storage:* permissions are admin-only; without the grantSystemRolePermissions
skip the default branch would have given operators an irreversible
file-deletion right
Also fix two confirmed leaks: DeleteConversation left chat_uploads files
on disk (their rows already vanished via ON DELETE CASCADE), and workflow
checkpoints had no deletion path at all.
Co-authored-by: Parallels <parallels@kali-linux-2025-2.localdomain>
Let audit_agent approve or reject with one System One call instead of chat JSON, while keeping the OpenAI-compatible backend as an option.
Co-authored-by: Cursor <cursoragent@cursor.com>
Ed1s0nZ