CalvinBackup/Embedded-Hacking
1
0
Fork 0
mirror of https://github.com/mytechnotalent/Embedded-Hacking.git synced 2026-09-04 09:10:46 +02:00
Code Issues Packages Projects Releases Wiki Activity

Fixed improper _

Browse Source
This commit is contained in:
Kevin Thomas
2026-04-11 10:52:10 -04:00
parent f6683beff5
commit 0df58712e1
70 changed files with 603 additions and 603 deletions
Download Patch File Download Diff File Expand all files Collapse all files
drivers/0x01_uart_cbm/Src/rp2350_uart.c
+10 -10
View File
@@ -28,7 +28,7 @@
* @brief Clear the UART0 reset bit in the reset controller.
* @retval None
*/
static void _uart_clear_reset_bit(void)
static void uart_clear_reset_bit(void)
{
uint32_t value;
value = RESETS->RESET;
@@ -40,7 +40,7 @@ static void _uart_clear_reset_bit(void)
* @brief Wait until the UART0 block is out of reset.
* @retval None
*/
static void _uart_wait_reset_done(void)
static void uart_wait_reset_done(void)
{
while ((RESETS->RESET_DONE & (1U << RESETS_RESET_UART0_SHIFT)) == 0) {}
}
@@ -49,7 +49,7 @@ static void _uart_wait_reset_done(void)
* @brief Configure GPIO pins 0 (TX) and 1 (RX) for UART function.
* @retval None
*/
static void _uart_configure_pins(void)
static void uart_configure_pins(void)
{
IO_BANK0->GPIO[0].CTRL = IO_BANK0_CTRL_FUNCSEL_UART;
IO_BANK0->GPIO[1].CTRL = IO_BANK0_CTRL_FUNCSEL_UART;
@@ -61,7 +61,7 @@ static void _uart_configure_pins(void)
* @brief Set UART0 baud rate divisors for 115200 at 12 MHz.
* @retval None
*/
static void _uart_set_baud(void)
static void uart_set_baud(void)
{
UART_BASE[UART_CR_OFFSET] = 0;
UART_BASE[UART_IBRD_OFFSET] = 6;
@@ -72,7 +72,7 @@ static void _uart_set_baud(void)
* @brief Configure line control and enable UART0.
* @retval None
*/
static void _uart_enable(void)
static void uart_enable(void)
{
UART_BASE[UART_LCR_H_OFFSET] = UART_LCR_H_8N1_FIFO;
UART_BASE[UART_CR_OFFSET] = UART_CR_ENABLE;
@@ -80,15 +80,15 @@ static void _uart_enable(void)
void uart_release_reset(void)
{
_uart_clear_reset_bit();
_uart_wait_reset_done();
uart_clear_reset_bit();
uart_wait_reset_done();
}
void uart_init(void)
{
_uart_configure_pins();
_uart_set_baud();
_uart_enable();
uart_configure_pins();
uart_set_baud();
uart_enable();
}
bool uart_is_readable(void)