Added cbm 1 2

drivers/0x01_uart_cbm/.vscode/launch.json

@@ -0,0 +1,37 @@
+{
+    "version": "0.2.0",
+    "configurations": [
+        {
+            "name": "Debug RP2350 (OpenOCD)",
+            "cwd": "${workspaceFolder}",
+            "executable": "${workspaceFolder}/uart.elf",
+            "request": "launch",
+            "type": "cortex-debug",
+            "servertype": "openocd",
+            "serverpath": "${env:USERPROFILE}/.pico-sdk/openocd/0.12.0+dev/openocd.exe",
+            "searchDir": ["${env:USERPROFILE}/.pico-sdk/openocd/0.12.0+dev/scripts"],
+            "gdbPath": "${env:USERPROFILE}/.pico-sdk/toolchain/14_2_Rel1/bin/arm-none-eabi-gdb.exe",
+            "device": "RP2350",
+            "configFiles": [
+                "interface/cmsis-dap.cfg",
+                "target/rp2350.cfg"
+            ],
+            "svdFile": "${env:USERPROFILE}/.pico-sdk/sdk/2.2.0/src/rp2350/hardware_regs/RP2350.svd",
+            "overrideLaunchCommands": [
+                "set arch armv8-m.main",
+                "set output-radix 16",
+                "monitor reset init",
+                "load",
+                "monitor reset halt"
+            ],
+            "openOCDPreConfigLaunchCommands": [
+                "set USE_CORE { cm0 cm1 }"
+            ],
+            "openOCDLaunchCommands": [
+                "adapter speed 5000"
+            ],
+            "preLaunchTask": "Compile Project",
+            "showDevDebugOutput": "raw"
+        }
+    ]
+}