2.8 KiB
Embedded Hacking - Hardware Parts and Products
LEGAL DISCLAIMER: The information, tools, and code provided in this repository and course are strictly for educational, research, and defensive purposes only.
You are explicitly prohibited from using any materials contained herein to access, test, modify, or exploit any device, network, or system that you do not own 100% or for which you do not have explicit, documented, and legally binding authorization to interact with.
By using this repository and course, you acknowledge and agree that:
- Any illegal, unauthorized, or malicious use of this information is solely your responsibility.
- The author(s) and contributor(s) of this repository and course shall not be held liable for any damages, legal repercussions, criminal charges, or unauthorized actions resulting from the use, misuse, or abuse of the contents herein.
- You will comply with all applicable local, state, national, and international laws regarding cybersecurity and computer fraud.
IF YOU DO NOT AGREE WITH THESE TERMS, DO NOT USE THIS REPOSITORY AND COURSE.
Here is a comprehensive list of hardware parts, products, and components referenced in the repository for the Embedded Hacking course:
Specific Components & Sensors
The following specific components are used throughout the course experiments and drivers (many of which are included in the component kit above):
- 1x Full-size Breadboard (Long)
- 1x Assorted Jumper Wires (Male-to-Male, Male-to-Female, Female-to-Female)
- 1x Raspberry Pi Pico 2 w/ Header
- 1x Raspberry Pi Pico Debug Probe
- 2x USB A-Male to USB Micro-B Cables (1 for Pico 2, 1 for Debug Probe)
- 3x 5mm LEDs (1 Red, 1 Green, 1 Yellow)
- 3x 100, 220 or 330 Ohm Resistors (for LEDs)
- 1x Push Button (Tactile switch)
- 1x 1602 LCD (with PCF8574 I2C backpack)
- 1x DHT11 Temperature & Humidity Sensor
- 1x SG90 Servo Motor
- 1x 1000uF 25V Capacitor (for Servo power stabilization)
- 1x Infrared (IR) Receiver (VS1838B)
- 1x Infrared (IR) Remote Controller (NEC-compatible)