mirror of
https://github.com/mytechnotalent/Embedded-Hacking.git
synced 2026-06-06 06:13:59 +02:00
Kevin Thomas
109 lines
2.8 KiB
C
109 lines
2.8 KiB
C
/**
|
|
******************************************************************************
|
|
* @file main.c
|
|
* @author Kevin Thomas
|
|
* @brief NEC IR receiver demonstration.
|
|
*
|
|
* Decodes NEC infrared remote frames on GPIO5 and prints
|
|
* each command byte in hex and decimal over UART.
|
|
*
|
|
* Wiring:
|
|
* GPIO0 -> UART TX (USB-to-UART adapter RX)
|
|
* GPIO1 -> UART RX (USB-to-UART adapter TX)
|
|
* GPIO5 -> IR receiver OUT (e.g. VS1838B or TSOP4838)
|
|
* 3.3V -> IR receiver VCC
|
|
* GND -> IR receiver GND
|
|
*
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* Copyright (c) 2026 Kevin Thomas.
|
|
* All rights reserved.
|
|
*
|
|
* This software is licensed under terms that can be found in the LICENSE file
|
|
* in the root directory of this software component.
|
|
* If no LICENSE file comes with this software, it is provided AS-IS.
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
|
|
#include "rp2350_ir.h"
|
|
#include "rp2350_uart.h"
|
|
#include "rp2350_xosc.h"
|
|
|
|
/**
|
|
* @brief Hex digit lookup table for byte-to-hex conversion.
|
|
*/
|
|
static const char _hex_lut[16] = "0123456789ABCDEF";
|
|
|
|
/**
|
|
* @brief Print a byte as a two-digit hex string over UART.
|
|
* @param value byte to print
|
|
* @retval None
|
|
*/
|
|
static void _print_hex(uint8_t value)
|
|
{
|
|
char buf[3];
|
|
buf[0] = _hex_lut[value >> 4];
|
|
buf[1] = _hex_lut[value & 0x0FU];
|
|
buf[2] = '\0';
|
|
uart_puts(buf);
|
|
}
|
|
|
|
/**
|
|
* @brief Print a byte as a decimal string over UART.
|
|
* @param value byte to print (0-255)
|
|
* @retval None
|
|
*/
|
|
static void _print_dec(uint8_t value)
|
|
{
|
|
char buf[4];
|
|
uint8_t idx = 0;
|
|
if (value >= 100) {
|
|
buf[idx++] = (char)('0' + value / 100);
|
|
buf[idx++] = (char)('0' + (value / 10) % 10);
|
|
buf[idx++] = (char)('0' + value % 10);
|
|
} else if (value >= 10) {
|
|
buf[idx++] = (char)('0' + value / 10);
|
|
buf[idx++] = (char)('0' + value % 10);
|
|
} else {
|
|
buf[idx++] = (char)('0' + value);
|
|
}
|
|
buf[idx] = '\0';
|
|
uart_puts(buf);
|
|
}
|
|
|
|
/**
|
|
* @brief Print a decoded NEC command in hex and decimal over UART.
|
|
* @param command decoded command byte
|
|
* @retval None
|
|
*/
|
|
static void _print_command(uint8_t command)
|
|
{
|
|
uart_puts("NEC command: 0x");
|
|
_print_hex(command);
|
|
uart_puts(" (");
|
|
_print_dec(command);
|
|
uart_puts(")\r\n");
|
|
}
|
|
|
|
/**
|
|
* @brief Application entry point for the NEC IR receiver demo.
|
|
* @retval int does not return
|
|
*/
|
|
int main(void)
|
|
{
|
|
int command;
|
|
xosc_set_clk_ref();
|
|
ir_timer_release_reset();
|
|
ir_timer_start_tick();
|
|
ir_init();
|
|
uart_puts("NEC IR driver initialized on GPIO5\r\n");
|
|
uart_puts("Press a button on your NEC remote...\r\n");
|
|
while (1) {
|
|
command = ir_getkey();
|
|
if (command >= 0)
|
|
_print_command((uint8_t)command);
|
|
}
|
|
}
|