mirror of
https://github.com/garrytan/gstack.git
synced 2026-10-31 22:14:25 +01:00
Garry TanandMatt Van Horn
fe6d1ae62a
* fix: mark Remaining Work provenance so restore verifies guessed steps first (#3004) /context-save now starts every Remaining Work item with `Open.` and ends it with how this session knows it: `(path run)` with the observed outcome, `(path read)` or `(path assumed)` for concrete paths, and `(target state checked)`, `(code read)` or `(path assumed)` for writing steps. /context-restore keeps saved order and original text but splits the list into Next steps and Verify first (assumed, code-read, failed runs and unmarked concrete or writing items), prints a banner for pre-marker checkpoints, and option A walks saved order so an unverified first item is verified before any later step runs. Adds a prompt-byte contract test for the marker wire format and a periodic behavior E2E (context-restore-provenance-order) that seeds an assumed item ahead of a run item plus a code-read write. Co-authored-by: Matt Van Horn <455140+mvanhorn@users.noreply.github.com> * fix(design): never overwrite a paid design image (#1529) Every image the API returns now goes through one persistence path (design/src/persist.ts): mkdir, exclusive `wx` claim that bumps x.png -> x-2.png ... x-999.png, write, fsync, close. A failure after the bytes arrived removes the claimed file and keeps a 0600 recovery copy in the temp dir; empty image data is a failure, never a 0-byte PNG. The API call is the only thing inside each retry loop, so a local save failure never buys a second image (variants, iterate fallback, generate --retry). generate, iterate, evolve and variants (both branches) print the same run fields (requested, saved, selected, failures, recovered) on every exit, with exit 0 / 2 (nothing saved) / 3 (stopped after saving). Each generate --retry attempt is its own saved image listed in `attempts`. compare accepts --images-file and JSON-array --images. The gallery lists bumped names, orders history by mtime then board-images.json, and marks approvals by approved_path. New bin/gstack-design-claim publishes staged images without clobbering; bin/gstack-design-approved resolves an approval record (legacy letter-only records still resolve; a missing approved_path is an error, never a substitute). Co-authored-by: Matt Van Horn <455140+mvanhorn@users.noreply.github.com> * fix(design skills): read the paths $D printed, never fixed variant names (#1529) Every design flow now captures each generating $D command's JSON and exit code without set -e, does round accounting before the first board, check or inline view (stopping when nothing was saved), and carries the printed paths forward. Boards are built from board-images.json via compare --images-file after archiving any earlier feedback.json, and approvals map the confirmed letter through that file and record approved_path. design-shotgun subagents generate into a per-run mktemp staging directory and publish with bin/gstack-design-claim instead of a shared /tmp/variant-X.png plus cp. design-html and taste memory resolve approvals with gstack-design-approved; design-review verifies against the printed target path. test/design-printed-paths.test.ts bans fixed variant names, variant globs, variant-{letter} reads, cp/mv of $D output and literal check paths in the generated skills and resolvers (one content-anchored allowlist entry: the design-html discovery probe), and pins the accounting/board marker order. test/design-approval-flow.test.ts runs the generated board and approval blocks through a stubbed two-round flow. * chore: release v1.91.17.0 (mvanhorn fix wave: checkpoint provenance, never-overwrite design images) * fix(design): keep iterate sessions in the OS temp dir and normalize tripwire paths on Windows * fix(setup-deploy): report failing status commands, specify merge-method, health and workflow checks --------- Co-authored-by: Matt Van Horn <455140+mvanhorn@users.noreply.github.com>
56 lines
2.1 KiB
Bash
Executable File
56 lines
2.1 KiB
Bash
Executable File
#!/bin/sh
|
|
# gstack-design-claim — publish a staged design image without overwriting.
|
|
#
|
|
# Usage: gstack-design-claim <staged-image> <destination>
|
|
#
|
|
# Creates <destination> with an exclusive, non-overwriting create (set -C
|
|
# noclobber, which opens with O_EXCL). When the name is taken it tries
|
|
# <stem>-2<ext>, <stem>-3<ext> ... <stem>-999<ext>, the same rule as
|
|
# $D's claimOutputPath (x-2.png bumps to x-2-2.png). Prints the final path.
|
|
# On any failure it exits non-zero with problem/cause/fix and leaves the staged
|
|
# image in place, so the paid bytes survive. On success the staged copy is
|
|
# removed.
|
|
|
|
set -u
|
|
|
|
fail() {
|
|
printf 'gstack-design-claim: %s\ncause: %s\nfix: %s\n' "$1" "$2" "$3" >&2
|
|
exit 1
|
|
}
|
|
|
|
[ "$#" -eq 2 ] || fail "expected 2 arguments, got $#" "usage: gstack-design-claim <staged-image> <destination>" "pass the staged image path, then the destination path"
|
|
src=$1
|
|
dest=$2
|
|
|
|
[ -f "$src" ] && [ -s "$src" ] || fail "staged image $src is missing or empty" "the generating command did not save an image there" "use the outputPath the \$D command printed"
|
|
|
|
dir=$(dirname "$dest")
|
|
base=$(basename "$dest")
|
|
case "$base" in
|
|
?*.*) stem=${base%.*}; ext=".${base##*.}" ;;
|
|
*) stem=$base; ext="" ;;
|
|
esac
|
|
|
|
err=$(mkdir -p "$dir" 2>&1) || fail "cannot create $dir; staged image kept at $src" "$err" "make $dir writable or choose another destination"
|
|
|
|
n=1
|
|
candidate=$dest
|
|
while :; do
|
|
if err=$( (set -C; : > "$candidate") 2>&1 ); then
|
|
if err=$(cat "$src" 2>&1 > "$candidate"); then
|
|
rm -f "$src"
|
|
printf '%s\n' "$candidate"
|
|
exit 0
|
|
fi
|
|
rm -f "$candidate"
|
|
fail "cannot write $candidate; staged image kept at $src" "$err" "free disk space or make $dir writable, then rerun"
|
|
fi
|
|
if [ -e "$candidate" ] || [ -L "$candidate" ]; then
|
|
n=$((n + 1))
|
|
[ "$n" -le 999 ] || fail "$dest and every name through $stem-999$ext already exist; staged image kept at $src" "999 images already use this name" "choose a new destination name or move older images out of $dir"
|
|
candidate="$dir/$stem-$n$ext"
|
|
continue
|
|
fi
|
|
fail "cannot create $candidate; staged image kept at $src" "$err" "make $dir writable or choose another destination"
|
|
done
|