gstack/docs/hosts.md

Running gstack on other agents

The README has the host matrix: one row per agent with its tier, install command and first invocation. This page has the rest: agent harnesses (OpenClaw, Hermes, dots, QM, Muse Code, Grok and any other), how a checkout decides which agents it renders for, the per-host notes, outside-review providers, the Codex behavioral profile, model tiers, and the design binary's models.

Agent harnesses

Installing gstack inside an agent harness registers its skills the harness's own way, in the same ./setup run. bin/gstack-harness does the work and lib/harness-register.ts holds one target per harness.

When it is automatic. ./setup with no --host (or --host auto) registers with the harness it runs inside: OpenClaw (its exec tool sets OPENCLAW_SHELL=exec), Hermes (HERMES_AGENT=true) or a Dot (HOME=/home/dot on a Dot's computer), or a harness found among setup's parent processes. It prints every path it wrote and the command that removes them. An explicit --host claude (or any other host) never writes under a harness folder, and neither does ./setup --local. ./setup --no-harness-auto or GSTACK_HARNESS_AUTO=0 turns the automatic step off.

What it writes. Copies in the harness's own skills folder, never edits to openclaw.json, Hermes's config.yaml or any context file you did not name. Every file goes into a ledger, $GSTACK_STATE_ROOT/harness/<id>.ledger, with its sha256. Registering again changes only what changed; a folder or skill name gstack did not write stops it (HARNESS_UNOWNED_ENTRY); gstack-uninstall and gstack-harness unregister remove exactly the ledger's files, never through a symlink, and rename any file you edited to <file>.edited-<time> beside itself, where uninstall cannot take it. A context block is cut only when it is the one gstack wrote; an edited block is left for you. ./setup --refresh-registered (what /gstack-upgrade runs) refreshes every registration. gstack-harness status lists them and runs the harness's own skill list where it has one (visible to harness: yes). Errors: troubleshooting.

Harness	What gstack registers	Install	Verify	Remove
OpenClaw	one gstack router skill (one description line in every request; its body lists every skill and its path) in ${OPENCLAW_STATE_DIR:-~/.openclaw}/skills/gstack; --skills all registers every skill as its own top-level folder	./setup --host openclaw, or ./setup inside OpenClaw	openclaw skills list --json shows gstack (source openclaw-managed, eligible)	gstack-harness unregister openclaw
Hermes	every skill, as gstack-<skill> in one gstack category, in ${HERMES_HOME:-~/.hermes}/skills/gstack (Hermes opens only skills it has indexed)	./setup --host hermes, or ./setup inside Hermes	hermes skills list shows the gstack-* skills in category gstack	gstack-harness unregister hermes
dots (feder-cr)	the gstack router in /home/dot/skills/gstack, which the Dot lists every turn	./setup on the Dot's computer, or gstack-harness register dots	the Dot's Skills page, or GET /skills	gstack-harness unregister dots
QM	an org skill pack: github.com/garrytan/gstack at the installed commit, every skill imported (instruction-only there: discovery, no gstack runtime)	an org admin, with GSTACK_QM_URL and GSTACK_QM_ADMIN_TOKEN set: gstack-harness register qm --yes	QM's skill list for the org	gstack-harness unregister qm --remote archives the pack; without --remote only the local record goes
Muse Code, Grok Build	nothing: both read ~/.claude/skills, so the Claude install (./setup) is what they see, with Claude tool names	./setup	gstack-harness status runs muse skills list / grok inspect and reports discovered (Claude-rendered, unverified)	gstack-uninstall
Grok Bot, any chat-only skill library	nothing on disk	gstack-harness register generic --print, then paste the router and block into the app	ask it for a gstack skill	delete the pasted text
any other harness	the router in an Agent Skills folder you name, and/or a 600-byte routing block between <!-- gstack:begin harness-routing --> markers in a context file you name	gstack-harness register generic --skills-dir <dir> and/or --context <file>; gstack-harness manifest generic prints every skill as JSON	the harness's own skill list	gstack-harness unregister generic

OpenClaw's ACP route below is unchanged: native registration gives OpenClaw's own agent gstack's skills; ACP spawns Claude Code with the full install.

OpenClaw

OpenClaw spawns Claude Code sessions via ACP, so every gstack skill just works when Claude Code has gstack installed. Paste this to your OpenClaw agent:

Install gstack: run git clone --single-branch --depth 1 https://github.com/garrytan/gstack.git ~/.claude/skills/gstack && cd ~/.claude/skills/gstack && ./setup to install gstack for Claude Code. Then add a "Coding Tasks" section to AGENTS.md that says: when spawning Claude Code sessions for coding work, tell the session to use gstack skills. Include these examples — security audit: "Load gstack. Run /cso", code review: "Load gstack. Run /review", QA test a URL: "Load gstack. Run /qa https://...", build a feature end-to-end: "Load gstack. Run /autoplan, implement the plan, then run /ship", plan before building: "Load gstack. Run /office-hours then /autoplan. Save the plan, don't implement."

After setup, just talk to your OpenClaw agent naturally:

You say	What happens
"Fix the typo in README"	Simple — Claude Code session, no gstack needed
"Run a security audit on this repo"	Spawns Claude Code with Run /cso
"Build me a notifications feature"	Spawns Claude Code with /autoplan → implement → /ship
"Help me plan the v2 API redesign"	Spawns Claude Code with /office-hours → /autoplan, saves plan

See docs/OPENCLAW.md for advanced dispatch routing and the gstack-lite/gstack-full prompt templates.

Native OpenClaw Skills (via ClawHub)

Four methodology skills that work directly in your OpenClaw agent, no Claude Code session needed. Install from ClawHub:

clawhub install gstack-openclaw-office-hours gstack-openclaw-ceo-review gstack-openclaw-investigate gstack-openclaw-retro

Skill	What it does
gstack-openclaw-office-hours	Product interrogation with 6 forcing questions
gstack-openclaw-ceo-review	Strategic challenge with 4 scope modes
gstack-openclaw-investigate	Root cause debugging methodology
gstack-openclaw-retro	Weekly engineering retrospective

These are conversational skills. Your OpenClaw agent runs them directly via chat.

Which agents a checkout renders for

An explicit --host X installs for X only and never changes another agent's install. /gstack-upgrade refreshes every install it registered, one row per host, and says which ones failed.

A checkout carries skills only for the agents installed from it. Setup records them in .gstack-installed-hosts and never drops one, so adding an agent later is just ./setup --host <name>. Copies rendered for other agents are pruned: generated files move to ~/.gstack/backups/host-renders/, and files gstack can't prove it generated stay where they are. A global Claude install went from 632 SKILL.md files (34.7 MB) to its own 63 (2.5 MB), which keeps Cursor-agent from freezing on the skills tree (#1694). In a development checkout, bun run build still renders every agent; inside an install it renders the recorded ones, and GSTACK_RENDER_HOSTS=all bun run build renders them all.

Per-host notes

Copilot invokes gstack skills by their prefixed names (/gstack-review) because /review is a Copilot built-in. Copilot ignores skill hooks, so /careful and /freeze only advise there, and COPILOT_HOME other than ~/.copilot is not supported yet (setup refuses and changes nothing).

Antigravity CLI also invokes skills by prefixed name (/gstack-review). Setup writes only ~/.gemini/antigravity-cli/skills/gstack*: Gemini CLI's ~/.gemini/skills and settings are never touched, and --host auto selects Antigravity only when agy is on PATH or ~/.gemini/antigravity-cli exists, never for a Gemini-CLI-only ~/.gemini. The Antigravity 2.0 app and IDE read ~/.gemini/config/skills, which this host does not install.

Outside reviews require the selected CLI to be installed and authenticated: Claude Code when using gstack in Codex, or Codex on other harnesses. External harnesses discover these commands as /gstack-claude-code and /gstack-codex; each harness omits its own wrapper. Explicit provider requests keep that provider. The existing codex_reviews setting controls automatic outside reviews where supported, regardless of the provider selected.

/claude has been renamed to /claude-code. Re-run ./setup --host <name> to migrate managed installations, including other harnesses sharing the checkout. Setup preserves the previous installation if replacement generation or installation fails and prints repair instructions.

Instruction-only agents

Instruction-only tier (any rules-reading agent that loads no skills — Zed, Amp, Jules, side projects): copy the 2KB digest at agents-digest/gstack-AGENTS.md into a location your agent reads (for example, append it to your project's AGENTS.md). It carries gstack's ethos, reuse ladder, and voice rules — no install required. The digest's first line shows its gstack version; re-copy it after upgrading.

Codex: the behavioral profile and model selection

For Codex, setup reads the top-level model from ${CODEX_HOME:-~/.codex}/config.toml and generates the matching behavioral profile, falling back to gpt-6-astra when no usable model is configured. gpt-5.6-sol automatically receives bounded-scope instructions that finish the requested lake without expanding into adjacent cleanup or speculative hardening. The Sol profile is exact-match only: dated snapshots and other 5.6 variants get the generic GPT profile, and setup warns on near-misses like gpt-5.6-sol-2026-08-01. Override detection with ./setup --host codex --model <id> — the override applies to that run only; set model in your Codex config.toml to make it stick across upgrades. After changing your Codex model, rerun ./setup --host codex to regenerate the skills.

Plan-review and implementation tiers. Plan workflows use an independent frontier reviewer: Fable 5.1 from Codex, or GPT-6 Astra from Claude Code. Implementation handoffs recommend the smart tier: Opus 5.5 or GPT-6.1 Sol. Choose a different tier, pin either provider's model, or use host mode to preserve native model settings. The read-only gstack-models command explains the effective choices; changing these settings does not require regenerating skills or switch your running session. A weekly maintenance check flags changed official recommendations and retirement notices without automatically changing models. See model policy: setup, overrides and freshness.

Other Codex calls keep their existing selection. Without the explicit plan-review role (including ordinary review and ship adversarial passes), gstack picks the model in this order: a model you name for that request, then GSTACK_CODEX_MODEL, then model in your Codex config.toml (for native codex review, review_model first; a custom CODEX_HOME is honored), and only then gstack's default, gpt-6-astra. Before spending anything, it prints the choice and where it came from, for example CODEX_MODEL: gpt-5.6-terra (exec; source: ~/.codex/config.toml model). If your choice is invalid or your account cannot use it, gstack stops with a repair message and reports the outside review as unavailable. It never silently switches to its default. Nested Codex reviews also run with installed skills hidden (-c skills.include_instructions=false), so a review cannot turn into a whole nested skill run. Runtime model selection is separate from the setup-time behavioral profile above. Without the plan-review role, /claude-code (gstack-claude-code on Codex) preserves Claude's configured model. Set GSTACK_CLAUDE_MODEL=<model> or name a model in your request to override it for the invocation, including resumed consultations. See eval defaults and overrides for capture, judge, and benchmark model selection.

The design binary's models

The design binary ($D) uses OpenAI's gpt-5.5 by default, with image generation through gpt-image-2. Set GSTACK_DESIGN_MODEL=<model> to use another gpt-5-class model for both image generation and screenshot analysis; if OpenAI rejects it, the error names GSTACK_DESIGN_MODEL. Set GSTACK_DESIGN_IMAGE_MODEL=<gpt-image model> to change the image tool model; a value that is not a gpt-image model name is refused before any request. Check a key against the defaults with bun run design/scripts/live-model-check.ts, which always tests the default models and ignores both overrides; the weekly periodic census runs the same check. Set OPENAI_BASE_URL to send every $D call to an OpenAI-compatible gateway instead of api.openai.com; egress receipts record the gateway host. On Codex, /design-shotgun generates mockups with Codex's built-in $imagegen skill instead, so it needs no OPENAI_API_KEY; $D still builds and serves the comparison board.

Adding a host

Want to add support for another agent? See docs/ADDING_A_HOST.md. Rendering a new agent is one TypeScript config file; installing it also needs a setup arm and the conformance kit, and it starts as experimental.