gstack/docs/troubleshooting.md

Troubleshooting gstack messages

Find the message you saw, then follow its fix. Every check gstack runs ends in one of three states:

• ran: the check executed. It may still have found problems.
• not run: gstack chose not to run it (you turned it off, or nothing applied).
• unavailable: gstack tried and could not run it. This is missing coverage, never a pass.

A message that is not ran has this shape:

<check>: not run (<reason>). Fix: <command>
<check> unavailable: <reason> (<detail>). No review ran; this is missing coverage, not a pass. Fix: <command>
<check>: ran, verdict unverified (<reason>). Fix: read the output above

Search this page for the words after unavailable: or not run (. Each section has a stable link anchor; the reason codes and anchors come from lib/gate-outcomes.ts, and a free test fails if a code has no section here.

Check readiness before a skill runs

Run ~/.claude/skills/gstack/bin/gstack-doctor (other hosts: ./setup --status in your gstack checkout prints the doctor's absolute path). It prints one row each for the install, state root, Bun, hooks, Codex, the cached Codex model check, artifacts sync, the browse bundle, the other compiled binaries, the /cso native helper, Claude Code, the largest session journal and recent /autoplan guard codes. Each row is ok, warn, not configured or fail with its fix; only fail exits non-zero. It makes no paid call: the Codex rows report the cached model check and its age, and --live runs that check once. Paste its output into bug reports.

---

Model policy

The model-policy guide explains the two tiers, all six settings, precedence and the read-only inspection command. A resolved selection is not proof that the requested provider or model can run.

Model policy configuration is invalid or unreadable

Meaning. The new policy path could not read a coherent configuration or a configured value is invalid. An unreadable file is not treated as an absent setting: doing that could silently select the premium default.

Fix. Repair the file or key named by the error. plan_review_tier accepts frontier, smart or host; implementation_tier accepts frontier or smart. Use gstack-config unset <key> to restore a default, not an empty value. A rejected set leaves the old value intact. Correct ownership/read permissions rather than deleting an unrelated state directory. For a malformed line such as plan_review_tier = smart, edit the reported file and correct or remove that line first: unset only removes canonical key: records and cannot repair a misspelled delimiter or quoted key.

Expected result. gstack-models list or the corresponding resolve command explains the winning source. No outside model call ran on this error.

A custom provider needs an explicit model or host mode

Meaning. Native settings or environment flags route the reviewer to a custom endpoint or partner platform. A public API catalog identifier is not necessarily a valid deployment identifier there. Malformed native provider configuration also prevents gstack from assuming the public endpoint.

Fix. Supply a compatible model for that request, set the provider's gstack environment override or tier-model setting, or choose gstack-config set plan_review_tier host. Keep credentials in the provider's normal authentication mechanism, never in a model setting. If the error names a malformed native configuration, fix that source first.

Expected result. Inspection reports an explicit selection or honest host-managed delegation. It does not certify account entitlement or send a public default to an inferred custom endpoint.

The selected review model could not be used

Meaning. The requested model was rejected or the provider could not complete the review. A model may be nonexistent, unavailable to the account, retired, or behind a misconfigured endpoint; preserve the provider's evidence rather than treating all of these as the same diagnosis. No successful outside review is implied, and gstack does not substitute a different model.

Fix. Change the source named in the error. For example, an environment override beats a tier setting, so editing the tier cannot replace it. Unset or correct that override, or explicitly name a supported model for the request. Follow the existing auth, quota, sandbox or timeout repair when that is the reported failure. Missing usage identity remains unknown, even if inspection showed a requested ID.

Expected result. The next invocation announces its model and source, checks that same selection and reports the actual provider result. A cached probe or a native fallback is not a completed outside review.

Model-catalog freshness is unknown, stale or needs an update

Meaning. Official evidence changed, a required source could not be checked, or the retained evidence does not match this catalog and parser. unknown/source-unavailable is not current. A later source failure must not erase an earlier retirement finding or close its maintenance issue.

Fix. Read the failed source and evidence details in the freshness workflow report and tracking issue. Repair the source parser or publication access when needed, then run the workflow manually against the default branch. If a model was superseded or deprecated, follow the maintainer checklist to qualify a replacement or record a supported mitigation. Do not clear the issue just because a new release has not been adopted yet.

Expected result. Complete source checks produce evidence bound to the current catalog, while unresolved lifecycle findings remain visible. Personal pins and unrelated PRs are unchanged. Check the workflow's last run date too: a scheduled job that never runs cannot report its own absence.

Repairing recoveryRequired state

This flag deliberately keeps the issue open until a maintainer repairs the record. Another successful fetch alone cannot certify corrupted history.

1. Save the current issue body, including its retained recovery archive, and download the latest trustworthy workflow report. Use its report.state as the starting state; do not invent run IDs, catalog hashes or check dates.
2. Reconcile its lifecycle array with the issue's independent lifecycle block and any retained archive. Preserve known retirements, deadlines and human dispositions. A model currently in the catalog must not keep an old resolvedByCatalog flag from a previous replacement.
3. In the issue editor, restore valid JSON between the state:begin and state:end marker lines. Put that same lifecycle array between lifecycle:begin and lifecycle:end. Restore the standalone ownership and region markers, and leave human text outside the owned region intact.
4. Set recoveryRequired to false only after that reconciliation. If prior successful evidence cannot be verified, set lastSuccess to null rather than making up a fresh success. If lifecycle history cannot be recovered, leave the flag set and the issue open for investigation.
5. Run Model-policy freshness against the default branch. Only complete, current evidence with no unresolved findings can close the issue. A parsing or source error leaves it open; do not clear history to manufacture a pass.

Outside reviews (Codex and Claude Code)

Outside reviews send your diff, plan or question to a second AI provider. Their verdict comes from lib/outside-review-result.ts, which prints VERDICT: clean|findings|unverified|unavailable. A findings verdict with a P0 or P1 finding blocks exactly like a native P0/P1. unverified and unavailable are missing coverage: /ship and /review continue, show the gap in the readiness dashboard and the PR body, and never count it as a pass.

How the verdict is read from a review

• Severity tags. [P0]-[P3], Codex's native P1: labels, and a P0-P3 label at the start of a line after an optional heading, bullet, number or bold: **P1 — x**, **P1** — x, 1. P2 — x, P2 —, ### P1, or a table cell | P1 |. P0 and P1 block; P2 and P3 are advisory. A P0-P3 token in that label position that none of these forms reads (## P1/P2 findings) makes the review unverified, never clean. Code fences and inline code are quotes, not labels.
• Severity words in label position. Severity: High, Priority: low, a line that starts with High:, High —, [High] or **High** (after an optional heading, bullet or number), a bold **High** anywhere, or a table cell | high |. Critical and High block like P0 and P1; Medium and Low are advisory like P2 and P3. Words inside prose do not count: "high-level", "low-risk", "a medium-term follow-up" and "no critical findings" are not findings.
• Every review gate. These rules apply to every gate that summarises a review, including the execution gate behind /codex consult and challenge. A reply whose last Verdict: line says not ready but carries no readable severity prints FINDINGS: unspecified and exits 3 like a blocking finding.
• No findings. A review with no tag and no label is clean only when it says so explicitly (NO_FINDINGS, "no issues", "did not find any bugs"). Otherwise it is unverified (see below), never clean. A /codex consult answer with no severity labels at all is not a review summary and stays clean.
• Design proposals (the design-direction voices in /design-consultation and /office-hours) are read with the proposal gate: a completed proposal needs only its Recommendation: ... because ... line.

Outside-review prompts ask the reviewer to label each finding Critical, High, Medium or Low, so most reviews land on findings or clean.

gstack: cannot load gstack-codex-probe / gstack: cannot locate <helper> (shell: ...) / CODEX_MODE: helper_unavailable

Meaning. Skills run gstack-codex-probe as a command, one subcommand per check, so the shell your agent uses does not matter. cannot load gstack-codex-probe and CODEX_MODE: helper_unavailable mean the probe file is missing or not executable in your install.

cannot locate <helper> (shell: ...) comes from a helper that is still loaded into your shell with source (gstack-egress-lib.sh, and the Codex probe when a skill rendered before the upgrade sources it). Such a helper finds its own directory from bash (BASH_SOURCE) or zsh (%x). In any other shell (dash, sh), or when the shell cannot say which file it is reading, it stops instead of guessing a path. The message names the shell it saw.

Fix. For cannot load, re-run ./setup from your gstack checkout (or /gstack-upgrade). For cannot locate, run the skill from bash or zsh (the macOS and Linux defaults), or tell the helper where gstack is installed:

export GSTACK_ROOT=~/.claude/skills/gstack   # your install dir; it holds bin/

If you see gstack: sourcing gstack-codex-probe is deprecated ..., a skill rendered before the upgrade is still sourcing the probe. It keeps working until a release on or after 2026-10-21; run /gstack-upgrade to re-render your skills now.

Expected result. ~/.claude/skills/gstack/bin/gstack-codex-probe select-model exec prints CODEX_SEL: <model> (and CODEX_MODEL: <model> (exec; source: ...) on stderr) from any shell, and preflights print a CODEX_MODE other than helper_unavailable. gstack-codex-probe help lists every subcommand.

Codex outside review unavailable: Codex's sandbox could not start here (...)

Meaning. Codex runs every command inside a Linux sandbox (bubblewrap). In many containers and devcontainers the kernel does not allow unprivileged user namespaces, so the sandbox cannot start and every command Codex tries fails. gstack reports this instead of trusting a review that read nothing. CODEX_MODE: sandbox_unavailable is the same condition found by the free preflight before any paid call.

What is kept. Nothing was sent for review, or the review was discarded. Your code and files are unchanged.

Fix. Enable unprivileged user namespaces for the container (for Docker, a seccomp profile that allows them), or, inside a container you trust, run Codex without its sandbox for this shell:

export GSTACK_CODEX_NO_SANDBOX=1

Expected result. With namespaces enabled, the next review prints OUTSIDE_STATUS: completed. With GSTACK_CODEX_NO_SANDBOX=1, every review prints WARNING: GSTACK_CODEX_NO_SANDBOX=1: ... because Codex can then read and write anything your user can. Only the exact value 1 works, and only from your shell environment.

... outside review unavailable: the reviewer could not run commands or read the diff (...)

Meaning. The reviewer tried to run commands but none succeeded, or its answer says it could not run commands or read the diff. A "no issues found" written after that is not a review.

What is kept. Nothing; the answer is shown above but not counted.

Fix. Read the reviewer's stderr above, repair what it names, and re-run.

Expected result. OUTSIDE_STATUS: completed with a VERDICT: line.

... outside review unavailable: the reviewer process failed (exit N: ...)

Meaning. The provider CLI exited non-zero. The first stderr line is in the parentheses.

What is kept. Partial output is shown above; it is not counted.

Fix. Repair the cause in the provider diagnosis (log in again, fix the model, check the network), then re-run.

Expected result. OUTSIDE_STATUS: completed.

... outside review unavailable: the reviewer hit its time limit and was stopped (exit 124)

Meaning. The provider did not finish within its deadline and was stopped.

What is kept. Partial output is shown above; it is not counted.

Fix. Re-run with a smaller scope, or check the provider's status and your network.

Expected result. OUTSIDE_STATUS: completed.

... outside review unavailable: the reviewer returned no response

Meaning. The provider exited successfully but returned nothing.

Fix. Read the stderr above, then re-run.

Expected result. OUTSIDE_STATUS: completed.

... outside review unavailable: the reviewer declined to review

Meaning. The provider answered with a refusal instead of a review.

Fix. Re-run; if it declines again, rely on the native review.

Expected result. OUTSIDE_STATUS: completed.

... outside review unavailable: the response lacks the markers this gate requires (...)

Meaning. The answer did not contain what the gate checks: a Recommendation: ... because ... line, a SCORE:/AMBIGUITIES: pair, or severity tags.

Fix. Re-run the review.

Expected result. OUTSIDE_STATUS: completed.

... outside review: ran, verdict unverified (...) / OUTSIDE_STATUS: unverified / GATE: UNVERIFIED

Meaning. The review completed but had no severity tag or label and gave no explicit no-findings conclusion, so no pass or fail can be read from it (how the verdict is read).

What is kept. The full answer is shown above.

Fix. Read the output above and decide. It is not a pass, and /ship and /review list it as missing coverage.

... outside review: ran, verdict unverified (the review labels a finding with a P0-P3 severity in a form the parser cannot read (line N: "...")) / REASON: unparsed_severity

Meaning. The reply starts a line with a P0-P3 token, the place a finding's label goes, but in a form gstack does not read as one severity, for example ## P1/P2 findings or - P2/P3 nits. gstack will not guess which severity applies, so the verdict is unverified instead of clean. The quoted line in parentheses (also printed as UNPARSED:) is the first such label. When the same reply also has a readable P0 or P1 finding, that finding blocks (VERDICT: findings, exit 3) and the unparsed line is still printed.

What is kept. The full reply is shown above.

Fix. Read the quoted line and the reply, and decide; it is not a pass. Re-run the review and ask the reviewer to label each finding [P1] <title> or P1: <title>. To re-check a saved or corrected reply, run from your gstack checkout:

bun lib/outside-review-result.ts --verdict execution reply.md

(use review or structured for those gates).

Expected result. VERDICT: findings or VERDICT: clean with a P0-P3 FINDINGS: value, and no UNPARSED: line.

CODEX_MODE: model_unusable / MODEL_UNUSABLE

Meaning. Codex rejected the selected model: the account cannot use it (HTTP 400), the model is retired, or a custom provider's base_url is wrong (HTTP 404). The CODEX_MODEL: line names the model and where it came from.

Fix. Choose a model your account can use, or correct the provider:

export GSTACK_CODEX_MODEL=<supported-model>
# or edit model / base_url in ${CODEX_HOME:-~/.codex}/config.toml

Expected result. CODEX_MODE: ready.

CODEX_MODE: quota_exhausted / MODEL_QUOTA_EXHAUSTED

Meaning. Codex refused the call because the account behind it hit its usage limit (You've hit your usage limit, or insufficient_quota). The line under the marker is Codex's own message, with its reset time and where to buy more. The model choice is fine. gstack reports outside coverage as unavailable, never as a pass, and caches the result for 15 minutes, so the rest of the run (and other skills) make no Codex call. The HINT line says how many minutes remain.

Fix. Wait for the reset time in Codex's message, or add credits or a higher plan for that account. To use a different account, sign in again:

codex login

To re-check before gstack's 15-minute cache expires (for example, right after buying credits), skip the cached result for one check, or delete it:

export GSTACK_CODEX_PROBE_RETRY=1   # unset it again afterwards
# or
rm -f ~/.gstack/.codex-model-probe  # <state root>/.codex-model-probe

Expected result. After the reset (or after codex login, which changes the auth signature and re-probes at once), CODEX_MODE: ready.

CODEX_MODE: unverified (rate_limited) / MODEL_PROBE_RATE_LIMITED / unavailable: Codex rate-limited the review

Meaning. Codex answered HTTP 429 (too many requests), which usually clears within seconds. It is a different state from quota_exhausted and is never cached. At probe time the review still runs, and its own result decides. A 429 during the review itself means that review failed, so coverage is missing, never a pass.

Fix. Re-run the review in a minute. If 429s persist, check the rate limits for the account or API key on the provider's dashboard.

Expected result. CODEX_MODE: ready, and the review completes.

CODEX_MODE: unverified / MODEL_PROBE_INCONCLUSIVE

Meaning. The short model check timed out or hit a network error, so gstack could not confirm the model works. The review still runs and its own result is checked.

Fix. Nothing now. If the review then fails, its message says why.

CODEX_MODE: not_authed / AUTH_FAILED

Meaning. No Codex credentials were found: no CODEX_API_KEY, no OPENAI_API_KEY, no auth.json, and no set environment variable named by a custom provider's env_key in config.toml.

Fix.

codex login

or export the variable your provider's env_key names.

Expected result. CODEX_MODE: ready.

Codex review skipped (codex_reviews disabled) / CODEX_MODE: disabled

Meaning. You turned outside reviews off. This is not run, never a pass and never an outage.

Fix. To turn them back on:

gstack-config set codex_reviews enabled

outside review: not run (outside reviews are turned off ... ). Fix: gstack-config set codex_reviews enabled ... / OUTSIDE_STATUS: not_run reason=consent_missing

Meaning. The send itself refused. gstack-codex-probe run-with-timeout, gstack-claude-code, gstack-outside-voice and the unattended gstack-autoplan runner read codex_reviews before they send repository content to an outside model. When it is disabled, or when the config file exists but cannot be read (or holds a value other than enabled or disabled), they print this line, start no CLI and make no API request. An unset codex_reviews means the default, enabled, and the first send on a machine prints the notice below. A review you ask for by name (/codex, /claude-code) passes --user-invoked and still runs. This is not run, never a pass and never an outage; /autoplan records it as the phase's outside outcome (status: disabled, outcome: not_run, reason: consent_missing).

Fix. To allow outside reviews again:

gstack-config set codex_reviews enabled
gstack-config get --stored codex_reviews   # enabled, disabled, unset, or unreadable (exit 2)

If the stored read exits 2, fix the permissions or the malformed codex_reviews line in the config.yaml it names, then re-run.

NOTICE: gstack outside reviews send the review prompt and code to Codex (...) using ...

Meaning. Outside reviews are on by default. The first one on a machine says which provider receives your prompt and code and which login or key pays for it. It shows once (gstack records .codex-review-notice-shown in its state directory) and never blocks the review.

Fix. Nothing, if that is what you want. To stop sending code to Codex:

gstack-config set codex_reviews disabled

Expected result. Later reviews print Codex review skipped (codex_reviews disabled) or CODEX_MODE: disabled, and /ship and /review show the outside review as not run.

---

/ship, /review and /document-release

Shipped without a version change: no version source is configured (no VERSION file, no .gstack/version-path). ...

Meaning. /ship found no version file it owns: there is no VERSION, no .gstack/version-path, or release automation (release-please, Changesets, semantic-release, a workspace monorepo, a placeholder package.json version) owns the version. This is not run for the version bump.

What is kept. Everything else ships. No bump, no CHANGELOG version header, no vX.Y.Z PR title prefix.

Fix. To have /ship version releases, create VERSION, or pin the file:

echo package.json > .gstack/version-path && git add .gstack/version-path

Expected result. The next /ship bumps that file and writes a CHANGELOG header.

gstack-version-bump: classify: version source is broken: <path> ...

Meaning. The pinned version file does not exist, is empty, unreadable, or contains no parsable version. /ship stops instead of inventing 0.0.0.0.

What is kept. Nothing was written.

Fix. Repair that file, or correct --version-path / .gstack/version-path.

Expected result. gstack-version-bump classify prints the current version.

BASE_REFRESH: stale <rev> / Base coverage: stale at <rev>

Meaning. /review could not fetch the base branch (offline, no credentials, or a read-only .git such as Codex's sandbox), so it reviewed against your local origin/<base> at <rev>.

Fix. Run git fetch origin <base> outside the sandbox and rerun /review if the base has moved.

gstack-wtree: cannot create a temp index under <dir>; set TMPDIR to a writable directory / gstack-review-log: cannot create a private object directory under <dir>; no working-tree fingerprint. Set TMPDIR to a writable directory.

Meaning. /review fingerprints the working tree in a private temporary object directory (Codex's sandbox keeps .git read-only). The temp directory could not be created, so this review has no fingerprint and later steps cannot reuse its evidence.

Fix. export TMPDIR=<a writable directory>, then run /review again.

gstack-wtree: cannot stage the working tree: <git error>

Meaning. The fingerprint's objects could not be written. Standalone gstack-wtree writes into the repository's object store.

Fix. Run it through /review (gstack-review-log supplies a private object directory), or make .git/objects writable.

Plan completion audit: not run (no plan is bound to this branch and no docs/designs/ file matches). Fix: ...

Meaning. /ship and /review audit a PR against the plan bound to its branch (plan mode, /autoplan, or a Plan: <path> line in the PR body). With none bound and no matching docs/designs/ file, they no longer pick the newest unrelated plan; the audit is not run.

Fix. Add Plan: docs/designs/<file>.md to the PR body, or run /autoplan.

Expected result. The next /ship or /review prints the audit against that plan.

PERSISTED: no / PERSIST: gstack-review-log '{...}' / no saved Eng Review: run the PERSIST: line ...

Meaning. /plan-eng-review ran where the caller forbids writes (for example a delegating agent keeps the reviewer read-only, so it cannot edit the plan it judges). The review completed: it ends DONE with PERSISTED: no, records telemetry success, and returns the full report and decision ledger in its reply. Nothing was saved, so /ship's readiness dashboard has no Eng Review record and reports NOT CLEARED with "no saved Eng Review". A real failure (a permitted save that failed, stale evidence) still ends BLOCKED.

What is kept. The reply holds the complete report; its last line is the review-log command with this review's values.

Fix. From the reviewed repository, run the reply's last line without the PERSIST: prefix:

~/.claude/skills/gstack/bin/gstack-review-log '{"skill":"plan-eng-review",...}'

Or rerun /plan-eng-review where it may write its report and log.

Expected result. gstack-review-read lists the plan-eng-review entry and /ship's dashboard shows the Eng Review row (CLEAR when its status is clean).

gstack-learnings-search: bun not found on PATH, so learnings could not be read. Fix: ...

Meaning. Learnings search (and gstack-timeline-read, "the timeline") needs Bun. It exits 127 instead of looking like "no learnings".

Fix. Install Bun from https://bun.sh, then cd <gstack checkout> && ./setup.

Expected result. Skills print your prior learnings again.

LEARNINGS: unavailable (<first stderr line>)

Meaning. A skill's learnings lookup failed (often Bun is missing). Skills used to show nothing here, which looked like "no learnings".

What is kept. Your learnings file is untouched; the skill continues without them.

Fix. Read the reason in parentheses. If it names Bun, install it and re-run ./setup.

gstack-learnings-log: could not create a temp file in <dir>, so the learning was not recorded. Fix: ...

Meaning. The learnings, question and preference logs write through a temp file in ${TMPDIR:-/tmp}. A sandbox that blocks it used to drop the entry silently.

Fix. export TMPDIR=<a writable directory> and log again.

CALIBRATION: not calibrated: no recorded signals

Meaning. Your logged answers matched no psychographic signal, so /plan-tune has nothing to calibrate from. It no longer says "calibrated".

Fix. Answer more registered questions, then gstack-developer-profile --derive.

gstack: earlier data for this project is in projects/<slug> (a worktree's old bucket). Merge it: ...

Meaning. Linked worktrees now share the main checkout's project identity. Learnings and checkpoints a worktree wrote under its own old bucket still exist.

Fix. Merge them (logs are de-duplicated, conflicts listed, nothing overwritten):

gstack-slug --adopt-legacy --from <slug>

Or stop the reminder: gstack-slug --adopt-legacy --dismiss <slug>.

---

Design skills

DESIGN_NOT_AVAILABLE: <path> --version exited <code> (or timed out after 10s, is not installed, no timeout/gtimeout/perl ...)

Meaning. Design skills now run "$D" --version with a 10-second deadline before claiming DESIGN_READY. Exit 137 means macOS killed the binary at launch (a bad code signature); setup prints the same condition as design unavailable: <bin> is killed at launch (exit 137) after re-signing.

What is kept. Nothing was generated or spent.

Fix. Re-run setup, which rebuilds and re-signs the binary:

cd <gstack checkout> && ./setup

If the message names a missing timeout tool, install coreutils (gtimeout) or perl.

Expected result. The next design skill prints DESIGN_READY.

GSTACK_DESIGN_IMAGE_MODEL="<value>" is not a gpt-image model name (expected something like gpt-image-2); fix it or unset it to use gpt-image-2

Meaning. The design binary refuses an image tool model override that is not a gpt-image-* model name, before sending any request.

Fix. export GSTACK_DESIGN_IMAGE_MODEL=gpt-image-2 (or another gpt-image model your key can use), or unset GSTACK_DESIGN_IMAGE_MODEL.

TASTE_PROFILE_UNAVAILABLE: could not resolve the project slug (gstack-slug failed). Fix: run ./setup.

Meaning. /design-consultation and /design-shotgun load your taste profile. This says it could not be found, instead of acting as if you had none.

Fix. cd <gstack checkout> && ./setup.

cannot save paid image to <path>: <code> (<cause>). Image bytes were received; saved a recovery copy to <tmp path>. Fix: ...

Meaning. The paid image generation succeeded but writing it to the output path failed (disk, permissions, or every name through -999 taken). gstack never buys the same image twice and never overwrites an existing image.

What is kept. The image, at the printed recovery path in your temp directory.

Fix. Follow the printed fix (free disk space, make the folder writable, or pick a new --output), then copy the recovery file to where you want it.

---

Codex and other env-var hosts

gstack: no install found (tried <path>). Fix: ./setup --host <host> from your gstack checkout; ./setup --status shows it.

Meaning. On Codex, Factory, OpenCode, Cursor, Copilot and Kiro every bash block finds gstack on its own: an exported GSTACK_ROOT (with bin/ and lib/), then a repo-local install, then the host's global install ($CODEX_HOME/skills/gstack on Codex). None existed.

Fix.

cd <gstack checkout> && ./setup --host codex   # or your host
./setup --status

Expected result. ./setup --status lists the install and says the router is a real file and its section links resolve.

router is a symlink, which Codex skips / section links: N of M broken (first: ...)

Meaning. ./setup --status checks each registered install. Codex ignores a symlinked SKILL.md, and a broken section link means a carved skill cannot load its next step.

Fix. cd <source> && ./setup --host <host> (the command is printed).

saved your edited <path> to <backup> (setup rewrites gstack's SKILL.md copies on every run)

Meaning. Installed router and nested SKILL.md files are now real copies, rewritten by every setup. Your hand edit was saved first.

What is kept. Your edit, at <backup>. Move the customization into your own skill.

error: could not back up an edited SKILL.md copy under <root>; the previous runtime root is unchanged

Fix. Fix permissions on <state root>/backups, then ./setup --host <host>.

ERROR: <dir> is not a gstack checkout; nothing was changed. Re-run Step 2. / INSTALL_DIR is not set: re-run Step 2 ...

Meaning. /gstack-upgrade now checks, before any git command, that it is inside gstack's own checkout. A block ran without the path Step 2 printed, so it stopped instead of touching your project.

Fix. Run Step 2 again and prefix the block with INSTALL_DIR=<printed path>. On Windows (Git Bash) with INSTALL_DIR set correctly, older /gstack-upgrade text compared two spellings of the same path and refused anyway; recover with cd <install dir> && git pull --ff-only --autostash && ./setup (see the hook false positive).

<host>/<skill>/SKILL.md is <bytes> bytes, over the 160,000-byte limit. Fix: carve sections with usesLazySections() for this skill.

Meaning. For contributors: hosts read at most 160,000 bytes of one SKILL.md. bun run gen:skill-docs fails in the repo and warns under --install-root.

---

Setup and auto-update

gstack needs Bun 1.3.3 or newer (1.4.2 recommended); found <version> at <path>. Nothing was installed or changed.

Meaning. Bun older than 1.3.3 silently ignores the build flags that stop gstack's compiled tools from reading a project's .env, so setup refuses it before writing anything. The same link appears on two warnings that do not stop setup: warning: gstack is tested on Bun 1.4.2 (CI pin); found <version> (1.3.3 up to 1.4.2 works but is untested) and warning: could not read the Bun version (...) (setup continued; check bun --version).

Fix.

bun upgrade
./setup

Expected result. bun --version prints 1.4.2 or newer and setup finishes with no Bun warning.

gstack auto-update: update held (bun-too-old: found Bun <version> at <path>; gstack <version> needs <floor> or newer); nothing was installed or changed. Fix now: ...

Meaning. Team-mode auto-update fetched a release whose setup needs a newer Bun than the one setup would run. It left your checkout and installed skills at the current revision and prints this line once per session start. (An older auto-updater running its first update cannot make this check.)

Fix. bun upgrade; the next session start resumes the update. To update now: bun upgrade && cd <gstack checkout> && git pull --ff-only && ./setup.

bun-version-unreadable: could not read the version of Bun at <path> (bun --version printed '<output>'); gstack <version> needs <floor> or newer (BUN_VERSION_UNREADABLE)

Meaning. Before moving the checkout, the auto-updater and /gstack-upgrade compare the Bun that setup would run with the incoming release's security floor. bun --version printed something that is not a version (shown, with control characters removed), so the comparison could not run and the update was held: nothing was installed or changed. /gstack-upgrade prints the same text after BUN_VERSION_UNREADABLE:. Earlier releases read an unreadable version, and every version under zsh, as "not below the floor" and went ahead (#3195).

Fix. Reinstall Bun; bun upgrade may not run on a broken install. In Git Bash or a macOS/Linux terminal:

curl -fsSL https://bun.sh/install | bash
bun --version

Expected result. bun --version prints a version such as 1.4.2, and the next session start (or /gstack-upgrade) updates.

Fixed in. The first release after v1.91.101.0 (#3195).

gstack auto-update: setup did not finish (<reason>); installed skills may be out of date. gstack retries automatically. Fix now: cd <dir> && ./setup

Meaning. The pull worked but setup (or migrations) failed. gstack no longer says "just upgraded". It retries after 1 hour, then 6, then 24, and prints this line once per session start. A (bun not found on PATH) reason means install Bun first.

What is kept. The previous install stays active.

Fix. Run the printed command.

gstack auto-update: git pull did not finish (exit N: ...); gstack is not updating. Fix now: ...

Fix. cd <gstack checkout> && git pull --ff-only && ./setup.

gstack setup: refusing to register hooks that do not parse (Claude Code would block tool calls with them): <file>:<line>: <error>

On Windows (Git Bash), from 1.91.31: a false positive. If every TypeScript hook fails with bun could not bundle the TypeScript entry (the question-log, question-preference, auq-error-fallback and timeline-stop hooks, /autoplan's publication hook and /plan-ceo-review's mode-handoff hook), your hooks are fine. Git Bash handed Bun its paths as C:/… while the checker looked them up as /c/… (#3088, #3100); the checker on main reads both spellings. The same Git Bash spelling made /gstack-upgrade stop with ERROR: <dir> is not a gstack checkout; nothing was changed. One recovery covers both: update by hand, then run setup from the update.

cd ~/.claude/skills/gstack && git pull --ff-only --autostash && ./setup

Use your install directory if it is not ~/.claude/skills/gstack (./setup --status prints it). Expected result: setup finishes with exit 0 and no refusal line, and later auto-updates go through.

Meaning, everywhere else. Claude Code runs gstack's hook shims through /bin/sh, and a hook that does not parse exits 2, which blocks the tool call it guards in every session. Setup parse-checks every hook it registers and every hook a skill's frontmatter runs (/autoplan, /careful, /freeze, /guard, /investigate and /plan-ceo-review): the shim, the gstack shell helpers it sources (such as careful/bin/hook-extract.sh and bin/gstack-state-root.sh), and the TypeScript it runs with its local imports. A merge conflict marker line in any of those files fails as unresolved merge conflict marker, even when the file still parses (markers inside a heredoc, a string or a template literal do). The TypeScript is bundled from the gstack checkout, so the tsconfig.json or bunfig.toml of the project you run it from is never read. It registers the hooks that parse, skips the ones listed, finishes the rest of the install, and exits non-zero. Claude Code runs hooks straight from ~/.claude/skills/gstack, so a skipped hook that an earlier setup registered, or that a skill runs, keeps running the broken file until it is fixed. This is a gstack bug, or a half-applied edit or merge in your checkout: report the printed <file>:<line>.

Fix.

git -C ~/.claude/skills/gstack status   # half-applied edits or merge conflicts?
git -C ~/.claude/skills/gstack checkout -- <file>   # or finish the merge
cd ~/.claude/skills/gstack && ./setup

Expected result. Setup finishes with exit 0 and no refusal line.

gstack auto-update: update held (hook-does-not-parse: <file>:<line>: <error>); nothing was installed or changed, and your current hooks keep running. ...

On Windows (Git Bash), from 1.91.31: a false positive. If the held reason is <hook>.ts:1: bun could not bundle the TypeScript entry, the release is fine: your installed checker misread Git Bash's C:/… paths (#3088, #3100), and the auto-updater checks every release with it, so it holds every release until you update once by hand. Recovery (this also clears /gstack-upgrade's is not a gstack checkout refusal):

cd ~/.claude/skills/gstack && git pull --ff-only --autostash && ./setup

Use your install directory if it is not ~/.claude/skills/gstack. Expected result: setup finishes with exit 0, the next session start prints no held line, and later updates install on their own.

Meaning, everywhere else. Team-mode auto-update fetched a release with a hook that does not parse or still holds a merge conflict marker (the same check setup runs). It checked the incoming revision before moving your checkout, so your checkout, installed skills and registered hooks stay at the current revision. The incoming release's own bin/gstack-hook-check decides, so a checker bug in your install cannot hold later releases; your installed checker decides only when the incoming one crashes, prints nothing or prints a report it cannot verify. gstack checks again at the next update check and installs the first release whose hooks parse. This is a gstack bug: report the printed <file>:<line>.

Fix. Wait for the next release. A manual git pull followed by ./setup cannot be checked before the pull; setup then refuses the broken hook (see the entry above).

gstack auto-update: update held (hook-check-unavailable: <reason>); nothing was installed or changed, and your current hooks keep running. ... Fix now (in a terminal; Git Bash on Windows): cd '<dir>' && git fetch origin && bash bin/gstack-ff-update . '@{upstream}' && ./setup ...

Meaning. Neither the incoming release's hook checker nor your installed one gave a verified report on the incoming hooks (a crash, no output, an unreadable report, or no Bun to bundle the TypeScript hooks), or the incoming revision could not be extracted for the check (cannot extract the incoming revision: <git's error>), so the auto-updater cannot tell whether moving your checkout would break Claude Code tool calls. It left your checkout, skills and hooks at the current revision. The <reason> names what each checker did.

Fix. Run the printed command. bin/gstack-ff-update moves the checkout without losing a local edit (see shelved edits), and setup checks every hook it registers and says what is wrong (for example that Bun is missing).

On Windows, if the reason is git archive of the incoming revision failed, your updater predates the fix for #3184: see the held-install recovery.

HELD hook-check-unavailable: git archive of the incoming revision failed / gstack auto-update: update held (hook-check-unavailable: git archive of the incoming revision failed) ... / gstack auto-update: setup did not finish (bun not found on PATH) ... on Windows

Meaning. From 1.91.89.0 to the release that fixed #3184, the auto-updater extracted each incoming release with git archive | tar before checking its hooks. Git for Windows' MSYS tar cannot create the connect-chrome symlink because it comes before its target in the archive, so every release was held (~/.gstack/analytics/session-update.log shows the HELD line), and a stale setup did not finish (bun not found on PATH) line could hide the hold. Your installed updater cannot deliver its own fix, and the old /gstack-upgrade can leave conflict markers when a local edit conflicts. The recovery fetches the new bin/gstack-ff-update from the new revision into a private temp directory and runs it. It works on a clean install, an install with local edits that conflict, an install that already has unmerged files, and a prefix-mode install: regenerable SKILL.md and sections/*.md edits are re-rendered by setup, and every other edit is kept in a rescue ref (the command prints it; see shelved edits).

Fix, in Git Bash (use your install directory if it is not ~/.claude/skills/gstack):

cd ~/.claude/skills/gstack && git fetch origin main && d=$(mktemp -d) && git show FETCH_HEAD:bin/gstack-ff-update > "$d/gstack-ff-update" && bash "$d/gstack-ff-update" . FETCH_HEAD; s=$?; rm -rf "$d"; [ "$s" = 0 ] && ./setup

Fix, in Windows PowerShell 5.1 (it runs the same script through Git's bash.exe, then .\setup.ps1):

Set-Location -LiteralPath "$HOME\.claude\skills\gstack" -ErrorAction Stop; $gb = Join-Path (git --exec-path) '..\..\..\bin\bash.exe'; & $gb -c 'set -f; IFS=; git fetch origin main && d=$(mktemp -d) && git show FETCH_HEAD:bin/gstack-ff-update > $d/gstack-ff-update && bash $d/gstack-ff-update . FETCH_HEAD; s=$?; rm -rf -- $d; exit $s'; if ($LASTEXITCODE -eq 0) { .\setup.ps1 }

In Claude Code, ask it to run the Git Bash form above.

Expected result. The script prints ok <old> <new> or rescued <old> <new> refs/gstack/rescue/<oid> unmerged=<0|1>, setup finishes with exit 0, the next session start prints no held line, and later updates install on their own.

Trying an unreleased fix, and going back. A fix branch can be tried before it ships; auto-update pauses while a detached revision is checked out. Replace <branch> with the branch named in the issue.

cd ~/.claude/skills/gstack && git checkout -- 'SKILL.md' '*/SKILL.md' '*/sections/*.md' && git fetch origin <branch> && git checkout --detach FETCH_HEAD && ./setup

Set-Location -LiteralPath "$HOME\.claude\skills\gstack" -ErrorAction Stop; $gb = Join-Path (git --exec-path) '..\..\..\bin\bash.exe'; & $gb -c 'set -f; git checkout -- SKILL.md */SKILL.md */sections/*.md && git fetch origin <branch> && git checkout --detach FETCH_HEAD'; if ($LASTEXITCODE -eq 0) { .\setup.ps1 }

To go back to the released version (this also resumes auto-update):

cd ~/.claude/skills/gstack && git checkout -- 'SKILL.md' '*/SKILL.md' '*/sections/*.md' && git checkout main && ./setup

Set-Location -LiteralPath "$HOME\.claude\skills\gstack" -ErrorAction Stop; $gb = Join-Path (git --exec-path) '..\..\..\bin\bash.exe'; & $gb -c 'set -f; git checkout -- SKILL.md */SKILL.md */sections/*.md && git checkout main'; if ($LASTEXITCODE -eq 0) { .\setup.ps1 }

gstack auto-update: update held (unmerged-files: <n> unmerged file(s) in the install (first: <path>)); an earlier merge, rebase or stash pop left conflicts in the install, and an update would bury them. Fix now (...): cd '<dir>' && git fetch origin && bash bin/gstack-ff-update . '@{upstream}' && ./setup ...

Meaning. Your gstack checkout has unmerged files: conflict markers from a merge, rebase or git stash pop of your own, or from an auto-updater older than the fix for this (its merge --autostash left markers in place when a local edit conflicted). The background updater never moves a checkout with unmerged files, and it prints no "setup did not finish" fix while they exist, because setup would run over the markers.

Fix. Run the printed command. It saves everything first, the unmerged files included, in a rescue ref labelled "needs manual resolution", then moves the checkout to the release and runs setup. Read the rescue with the commands under shelved edits. To resolve the conflict yourself instead, finish or abort your merge (git -C '<dir>' merge --abort, git -C '<dir>' checkout -- <file>); gstack retries at the next check.

gstack auto-update: update held (autostash-unrecoverable: <reason>); your local edits are where they were and nothing was installed. Look first: git -C '<dir>' status --short. Fix now (...) / autostash-unrecoverable: <reason>

Meaning. bin/gstack-ff-update refused to move the checkout and changed nothing. The <reason> says why: an untracked file is where the release puts a tracked one (git refused to update ...: would be overwritten), a file changed while the update ran, another git command held the index lock (index.lock exists), or a rescue ref of that name already names another commit.

Fix. Run the status command the line prints, move the listed untracked file out of the way (or wait for the other git command to finish), then run the printed Fix now command. Nothing needs restoring: your edits are still in the working tree.

gstack auto-update: your local edits in the install (<files>) conflicted with an update, so they were saved in refs/gstack/rescue/<oid> and the install runs the update. ... / rescued <old> <new> refs/gstack/rescue/<oid> unmerged=<0|1>

Meaning. You had edited tracked files in your gstack checkout, and the release changed the same lines (or you had staged changes or unmerged files). Instead of leaving conflict markers in the checkout Claude Code runs hooks from, bin/gstack-ff-update saved your edits as one commit, refs/gstack/rescue/<oid>, and moved the checkout to the release. The rescue's first parent is the revision you had, so it holds only your changes; its second parent holds what you had staged. Edits that did not conflict stay in place, and regenerable SKILL.md and sections/*.md edits (skill prefix, gbrain blocks) are re-rendered by setup instead of being rescued. The session-start line repeats once a day until you delete the ref.

Fix. Inspect first:

git -C ~/.claude/skills/gstack show --stat 'refs/gstack/rescue/<oid>'

To keep your edits, export only your changes and apply them in a scratch checkout (never with stash apply in the install):

git -C ~/.claude/skills/gstack diff 'refs/gstack/rescue/<oid>^' 'refs/gstack/rescue/<oid>' > ~/gstack-local-edits.patch
git clone https://github.com/garrytan/gstack.git ~/gstack-scratch && cd ~/gstack-scratch && git apply -3 ~/gstack-local-edits.patch

A rescue labelled "needs manual resolution" holds files that were already unmerged: their content can contain conflict markers to resolve. Delete the ref when you are done (this also stops the daily line):

git -C ~/.claude/skills/gstack update-ref -d 'refs/gstack/rescue/<oid>'

gstack setup: refusing to replace <root> for <host>: this runtime directory contains the source checkout setup runs from (<checkout>), so replacing it would delete the checkout. Nothing was changed.

Meaning. Setup installs Codex, Factory, OpenCode, Cursor, Copilot and Antigravity by building a runtime root (such as ~/.cursor/skills/gstack) and swapping it in for the old one, and Kiro by writing into ~/.kiro/skills/gstack. Your gstack checkout lives at that root or inside it, so the swap would delete the checkout (#3084), and Kiro would link the checkout into itself. Setup refuses before writing anything. ./setup --status and gstack-doctor suggest the move for that host instead of ./setup --host <host>.

Fix. Move the checkout out, then run setup from its new place. Setup prints the exact commands. When ~/.claude/skills/gstack is a symlink to the checkout, the checkout takes the symlink's place:

rm ~/.claude/skills/gstack && mv ~/.cursor/skills/gstack ~/.claude/skills/gstack
cd ~/.claude/skills/gstack && ./setup --host claude && ./setup --host cursor

Otherwise move it anywhere outside the host's skills directory:

mv ~/.cursor/skills/gstack ~/gstack && cd ~/gstack && ./setup --host cursor

Expected result. Both setups finish with exit 0, and ./setup --status lists each host as current.

pruned <dir> (<host> is not installed from this checkout): ... / kept <path>: not proven generated (...) / host-render backup: <dir> (...)

Meaning. A gstack checkout keeps skills only for the agents installed from it, listed in .gstack-installed-hosts in the checkout (#1694). Older installs rendered every agent's copy, so a global Claude install carried 632 SKILL.md files (34.7 MB) that Claude Code and Cursor-agent scan. setup removed the copy for an agent that is not installed from this checkout. Generated files were moved to the backup directory it printed; links into the checkout were removed; files it could not prove gstack generated (kept ...) were left in place. prune.log in the backup lists every path. The same prune runs once from the upgrade migration. Agents in the record are never pruned.

Fix. Nothing, if you don't use that agent. To get an agent back, install it from this checkout, which records it and renders its skills:

./setup --host <name>

For an instruction-only agent you render by hand (Hermes, OpenClaw, GBrain), add its name to .gstack-installed-hosts first, then run bun run gen:skill-docs --host <name>. To restore one file, mv it back from the backup. A kept file is yours: move or delete it when you no longer need it. The backup sits in gstack's state root, which no agent scans; delete it once you are sure you don't need it (about 36 MB for a pre-1.91.65 Claude install).

Expected result. The next ./setup prints no pruned line, and ./setup --status lists the agents you use.

CSO unavailable: its native helper was not built (windows-msvc-compile)

Meaning. Visual Studio's compiler was found but the /cso native helper did not compile. setup prints the first compiler error. It used to say "install Visual Studio".

Fix. Fix the printed compiler error, then re-run ./setup.

CSO unavailable: the native helper's <stage> step failed (...) / CSO publish step failed (...) for <revision>; previous CSO kept: <revision>

Meaning. The /cso native helper is optional. Its build prerequisites were present, but the build step (compiling the helper) or the publish step (swapping the new helper into bin/ under a lock) failed. setup used to stop here (#3071); now it finishes everything else and says which step failed. When an earlier helper was installed and the failed publish restored it, setup prints previous CSO kept and /cso keeps using that helper; otherwise /cso reports not assessed. interrupted means the step was killed before it could record a result. The outcome is in bin/.gstack-cso-build-result, and gstack-doctor's cso row reads the same record. The build output is in bin/.gstack-cso-build.log.

Fix. Read the log, fix what it reports, then retry from your gstack checkout:

bun run build:cso && ./setup

On Windows, setup and the build use PowerShell 7 (pwsh) when it is installed and fall back to Windows PowerShell 5.1. The root cause of the staged files vanishing during publish in #3071 is still unknown; attach the log there if you hit it. CI sets GSTACK_STRICT_BUILD=1, which makes these failures fatal so build regressions cannot hide.

Expected result. setup prints no CSO line, and the doctor's cso row is ok.

Docker found at <path>, but native Windows Docker transport is not supported yet; static assessment only. / docker.exe at <path> is outside the trusted install locations (...)

Meaning. On Windows, /cso looks for docker.exe only under the install folders Windows reports for Program Files, Program Files (x86) and the Windows directory, by its real path, with no symlink or junction on the way. A user-writable directory is untrusted, because the Docker child carries registry credentials; that refusal cannot be overridden.

Even a trusted docker.exe cannot run /cso's isolated containers yet: /cso admits only a local Unix Docker socket, and Docker Desktop on Windows speaks over a named pipe. /cso reports this and runs its static assessment only; no container or runtime check runs.

Fix. For runtime checks, run /cso from Linux or macOS (WSL2 counts as Linux) with a local Docker socket. On Windows, static assessment is the supported mode; if the refusal named a user directory, install Docker Desktop under Program Files.

Snapshot manifest cap exceeded: ... / 64 MiB source cap exceeded: ... / Symlink or special source file: <path>

Meaning. /cso copies the repository into a private snapshot before any audit starts, and refuses the whole run when the snapshot would be incomplete or too large. Each message names the cap that applied:

• Snapshot manifest cap (16 MiB). One entry per tracked or nonignored untracked file; about 50,000 files fit.
• 64 MiB source cap. The full size of every such file outside dependency and VCS directories counts, including files over 1 MiB whose contents are withheld from the audit.
• Symlinks. A tracked symlink anywhere in the repository stops the run.

Fix. No setting raises these caps. Run /cso on a smaller checkout that holds the code you want audited and no symlinks. Add your file count or size to #2993.

INVALID_OUTPUT: Scanner report is malformed, unsupported, or exceeds structural limits. (Semgrep on a real repository)

Meaning. Before the first release after v1.91.101.0, /cso redacted a scanner's JSON report by splicing an unquoted <REDACTED-...> marker over any bare number that looked like a phone number or card number, such as Semgrep's "max_memory_bytes":1145427776 or an epoch timestamp. The report then failed to parse and the scanner was recorded as not assessed (#3185). Now a redacted number becomes the quoted string "<REDACTED-...>" and the report parses. A redaction that would cross JSON tokens still withholds the payload (REDACTION_FAILED).

Fix. Update gstack (/gstack-upgrade), then run /cso again. If this code still appears, the scanner itself emitted malformed JSON; report the scanner and version at https://github.com/garrytan/gstack/issues.

Fixed in. The first release after v1.91.101.0 (#3185).

unsupported argv0 "docker-tools" (OrbStack's docker under /cso)

Meaning. /cso runs the canonical path of docker (symlinks resolved), and OrbStack's docker is a symlink to one multicall binary, docker-tools, that decides what to be from the name it was started as. Started under its real name it refused, so Docker isolation and every scanner were reported missing (#3187). /cso now starts the same verified binary with the name docker, including in its cleanup watchdog.

Fix. Update gstack (/gstack-upgrade), then run gstack-doctor; its cso row should pass with OrbStack running.

Fixed in. The first release after v1.91.101.0 (#3187).

removed the AskUserQuestion preference hook: it breaks Conductor's native AskUserQuestion (#2207). ...

Meaning. In Conductor, setup no longer installs the plan-tune question-preference hook and removes one it added before. The other plan-tune hooks stay.

Fix. To keep it anyway: gstack-config set plan_tune_hooks yes, then ./setup.

Error: browse_extension_id '<v>' is not a Chrome extension ID ... Existing value left unchanged.

Fix. Copy the 32-letter ID (letters a to p) from chrome://extensions, then gstack-config set browse_extension_id <id>.

---

Install check (gstack-doctor --check) and the Capy installer

gstack-doctor --check prints one PASS | FAIL | SKIP <id> row per component and ends with gstack: ok <revision> for=<workflow> (exit 0) or gstack: fail <id,id> (exit 1). Every FAIL row carries a fix: clause and one of the codes below. Read the trailer directly; never pipe --check through tail or another command whose exit status would replace the doctor's (docs/capy-install.md).

FAIL <id> — <detail>; fix: <command> (COMPONENT_MISSING; ...)

Meaning. A component the selected workflow needs (--for <skill>, --require <csv>, or by default every host profile installed from this checkout) is not installed, not built, not current, or not authenticated. The row names it: claude or codex (a host profile missing or stale), patch (the Codex render lacks the model behavioral patch), codex-cli (the Codex CLI is required and absent or not logged in), browse-bundle, browser (Chromium does not launch or render), cso (the native helper is required and not built).

Fix. Run the command in the row's fix: clause. For browser, that is <checkout>/bin/gstack-browser-ensure, which installs Chromium on first use when the installer skipped it (SKIP browser (lazy; ...)).

Expected result. The row turns PASS and the trailer reads gstack: ok.

FAIL runtime — bun <version> ... (RUNTIME_BELOW_MINIMUM; ...)

Meaning. The Bun on PATH is absent, below gstack's security floor (1.3.3: older Bun ignores the no-autoload compile flags, see bun-too-old) or below the supported minimum (1.4.2, the CI pin and engines.bun). The dashboard (gstack-doctor without --check) warns on an untested version; --check fails it, because a gate run on an untested runtime is the incident this check exists for. The default Capy cloud image ships 1.3.14, so a fresh Capy machine fails here until the installer upgrades Bun.

Fix. bin/gstack-capy-install upgrades Bun through setup's checksum-verified recipe before running ./setup. By hand: download https://bun.sh/install, verify its SHA-256 against GSTACK_BUN_INSTALL_SHA in bin/gstack-bun-version.sh, then BUN_VERSION=1.4.2 bash <file> and re-run ./setup.

FAIL pins — bun <version> outside engines.bun >=1.4.2 (package.json:<line>; ...) (PROJECT_PIN_MISMATCH; ...)

Meaning. The target project (--project <path>, default the git toplevel of the current directory, never the gstack checkout) pins a Bun or Node version the running one does not satisfy. Pins come from package.json (packageManager, engines), .tool-versions, .nvmrc, .bun-version and bun-version: / node-version: lines in .github/workflows/*.yml. A range (>=1.4.2) and an exact pin are told apart, and a CI pin keeps its platform lane: a Windows job's pin never fails a Linux run. The dashboard warns; --check fails. The row is SKIP pins (no bun to evaluate the project pins) when Bun is absent, never silent.

Fix. Install the pinned version for this platform (the row names each constraint with its source), or change the project's pin. On Capy the row's fix is the exact bootstrapper command, bash <skill>/scripts/install.sh (the same command without --check): it installs the pinned Bun when the pin names a verified version and ends gstack: ok, or stops with RUNTIME_PIN_CONFLICT naming the pin to raise.

FAIL revision — installed <version> (requested <ref>) (REVISION_UNMET; ...)

Meaning. --revision <ref> asked the doctor to certify a specific gstack revision (a VERSION string, tag, branch or commit) and the checkout is at another. An unmet revision is never ok.

Fix. Move the checkout: <checkout>/bin/gstack-upgrade (the tip of the default branch; /gstack-upgrade interactively), or git -C <checkout> fetch origin && git -C <checkout> checkout <ref> && ./setup. bin/gstack-capy-install --revision <ref> never moves an existing checkout; it reports gstack: ok <installed> (requested <ref>; run <checkout>/bin/gstack-upgrade to move).

gstack-capy-install: Bun conflict: gstack needs >=<minimum>, <project> pins <constraint> (RUNTIME_PIN_CONFLICT; ...)

Meaning. The installer installs one verified Bun archive: gstack's supported minimum, or the project's exact pin when that pin is above the minimum and listed in the message's verified archives:. Here the two do not meet (for example the project pins bun@1.3.14, or a version gstack has no verified archive for), so the installer changed nothing and stopped before ./setup.

Fix. Pin a verified version in the project, upgrade gstack to a release that verifies the pinned version, or install gstack on a machine whose Bun the project accepts. --project <path> names the project whose pins apply.

gstack-browser-ensure: NEEDS_SETUP ... (BROWSER_UNAVAILABLE; ...)

Meaning. The first browser skill run on a machine installed without Chromium (SKIP browser (lazy; gstack-browser-ensure installs on first use)) tried to install it through bun x playwright install chromium under setup's lock, or Chromium is installed but does not launch.

Fix. Read the installer output above: offline or proxied machines need network access to the Playwright CDN; on Ubuntu 24.04+ an AppArmor user-namespace error needs GSTACK_CHROMIUM_NO_SANDBOX=1; then re-run <checkout>/bin/gstack-browser-ensure. --with-browser on the installer front-loads the install on machines that want it now.

gstack-capy-install: preflight: <tool> not found (INSTALL_PREFLIGHT_FAILED; ...)

Meaning. The installer checks git, curl, node and jq before ./setup, and installs Bun when it is absent or below the supported minimum. One of them is missing, or the Bun install script's checksum did not match GSTACK_BUN_INSTALL_SHA (the download is discarded, nothing runs).

Fix. Install the named tool (apt-get install -y jq, Node from nodejs.org or nvm), then re-run bin/gstack-capy-install. A checksum mismatch means the upstream installer changed: update GSTACK_BUN_INSTALL_SHA only after reviewing the new script.

gstack-upgrade: <cause>; nothing was changed; fix: <command> (UPGRADE_REFUSED)

Meaning. bin/gstack-upgrade moves a checkout only by fast-forward to the tip of its remote default branch. It refused before changing anything: the directory is not a gstack checkout, HEAD is detached or on another branch (a pin), a tracked file is modified, a local commit is not on the remote branch, the incoming release's Bun floor is above the Bun on PATH, or another updater holds <state root>/.setup-lock. It never stashes, resets or discards.

Fix. Resolve the named cause with the printed command (commit or move the listed changes, check out the default branch, move local commits to another branch), then re-run bin/gstack-upgrade. A reinstall that failed after the fast-forward is completed by the next run (reinstall pending from <version>).

gstack-upgrade: live gstack sessions hold this installation: pid <p> (<age>m), ...; nothing was changed; fix: ... (UPGRADE_BUSY)

Meaning. Several agents share this checkout (Capy subagents on one machine, say). Each session start writes a workflow lease, <git dir>/gstack-leases/<harness pid> (bin/gstack-lease touch, from bin/gstack-skill-start), and bin/gstack-upgrade refused before changing anything because a lease whose pid is alive and not in its own process ancestry exists: fast-forwarding would change gstack under a session mid-workflow. Leases older than 120 minutes are pruned; a lease whose process has exited never blocks. The upgrader's own session (the pid chain it runs under) never counts.

Fix. Wait for those sessions to finish (bin/gstack-lease list shows every lease with its age and alive|dead), then re-run bin/gstack-upgrade. When you know they are idle, GSTACK_UPGRADE_FORCE=1 bin/gstack-upgrade proceeds. At a Capy session start the same refusal appears as SELF_UPGRADE: skipped (live gstack sessions hold this installation: ...) and the session continues on the installed revision.

gstack-upgrade: could not reach origin (...) (UPGRADE_FETCH_FAILED)

Meaning. The remote default branch could not be listed or fetched (offline, proxy, credentials), so --check cannot say whether the checkout is current. It never reports current without the fetch.

Fix. Check network access to the checkout's origin (git -C <checkout> remote -v), then re-run.

gstack: fail revision — installed <v> is below the supported minimum <m> (<cause>); fix: ... (REVISION_BELOW_MINIMUM)

Meaning. capy/support.env on the remote default branch declares the oldest revision whose installer, trailer and fix lines are honest (GSTACK_MIN_REVISION), and this checkout is older. The Capy skill bootstrapper reads it from FETCH_HEAD, so even a checkout that predates the file learns it. --check only reports (fast-forward available); install mode fast-forwards a clean, unpinned checkout, reinstalls and rechecks under one lock. The cause names why nothing moved: pinned by --revision, pinned: HEAD is detached, tracked files changed: <files>, diverged: ... or auto-upgrade disabled (GSTACK_CAPY_AUTO_UPGRADE=0). gstack-doctor --check --min-revision <m> fails the revision row the same way.

Fix. Run the fix clause: the bootstrapper without --check, or <checkout>/bin/gstack-upgrade. For a pin, drop --revision or pin a revision at or above the minimum. An interrupted install after the fast-forward leaves the trailer fail; the next install run completes it.

FAIL wrapper — ... (CAPY_WRAPPER_STALE) / WARN wrapper — ...; owner action: ... / gstack-capy-skill: owner action — Drive copy is wrapper <n>, minimum <m>; ...

Meaning. The Capy skill folder is older than the checkout's GSTACK_CAPY_MIN_WRAPPER (capy/support.env). The doctor's wrapper row decides by the active wrapper's provenance (GSTACK_CAPY_WRAPPER_REV and GSTACK_CAPY_WRAPPER_PATH, exported by the bootstrapper): a current active wrapper passes, and a stale Drive copy elsewhere is a WARN row, an owner action that never fails the run. Without provenance (a direct gstack-doctor --check, or a pre-bootstrapper copy with no GSTACK_CAPY_WRAPPER= line, which reads as wrapper 0) it reads the Drive copies (~/.capy/drive/*/skills/gstack/scripts/install.sh, or only GSTACK_CAPY_WRAPPER_PATH when set) and fails only when every copy is stale, listing each with its revision. A stale active wrapper is a WARN too: an older copy still works (capy/support.env). bin/gstack-upgrade runs the installer with the checkout's own copy as the active wrapper and never leaves a pending reinstall when the wrapper row is the only failure.

Fix. This session: run the checkout's own copy, bash <checkout>/capy/skill/gstack/scripts/install.sh --check --for <skill>; it carries current provenance, so it certifies with the stale Drive copy left unchanged. Owner: copy <checkout>/capy/skill/gstack/ over the Drive skill folder (on Capy, the user-scope Drive skills/gstack/), or have Capy re-sync it. The message recurs every session until the Drive copy changes. Agents never write the skill folder.

FAIL runtime — bun resolution drifted: recorded bun <v> at <path> (<rule>), now <current>; changed: <what>; fix: ... (BUN_RESOLUTION_DRIFT)

Meaning. Install and --check resolve Bun through one contract (gstack_bun_resolve in bin/gstack-bun-version.sh, twinned by resolveBun in lib/pregate/runtime.ts): the project's exact pin and gstack's install default in the runtime store (<state root>/runtimes/bun/<version>/bun), $BUN_INSTALL/bin, ~/.bun/bin, then PATH; the first Bun that satisfies gstack's minimum and every project pin wins. Install records the pick in the install verdict for this checkout and project (bun_path, bun_version, bun_rule). The recorded Bun is gone, reports another version (replaced in place), or no longer satisfies gstack's minimum and the project's pins. A different candidate that would now resolve first (a store Bun another project's install published, a changed BUN_INSTALL) is not drift: --check keeps the recorded Bun, prints note: the recorded bun ... stays certified and names the installer run that records the new pick. The pregate's lanes and guards (lib/pregate/runtime.ts) and the workflow start refuse with this code when the Bun the verdict recorded is gone or changed.

Fix. Run the row's fix: the installer, which records the current pick, or, when nothing eligible remains, re-downloads a verified Bun into the store. The next --check passes.

gstack-capy-install: GSTACK_BUN_INSTALL_VERSION=<v> is not a verified Bun at or above gstack's supported minimum ...; fix: ... (BUN_INSTALL_VERSION_INVALID)

Meaning. GSTACK_BUN_INSTALL_VERSION overrides the Bun the installer downloads when no exact project pin decides (GSTACK_BUN_DEFAULT, 1.4.3). It must be listed in GSTACK_BUN_VERIFIED (a SHA-256-verified archive) and sit at or above the supported minimum (GSTACK_BUN_TESTED). Nothing was installed.

Fix. Unset the variable, or set it to one of the verified versions the message lists.

INSTALL: fail verdict — <detail>; fix: ... (INSTALL_UNVERIFIED)

Meaning. On a Capy machine (GSTACK_CAPY=1, set by the GSTACK_LAUNCH line), an unattended or spawned workflow starts only with a passing install verdict (<state root>/install-verdicts/<sha256 of the checkout path>.json, named as GSTACK_INSTALL_VERDICT) for this checkout, its current HEAD and a workflow at least as wide as the one starting: a verdict for --for autoplan does not cover qa's browser, and a planning-only pins SKIP does not cover a workflow that runs the repo's tests. gstack-skill-start printed this row and GSTACK_RESULT: skill=<s> status=refused run=-, exit 3. The same start refuses an unattended run whose Bun on PATH is below the supported minimum (INSTALL: fail runtime ... (RUNTIME_BELOW_MINIMUM)) on any host.

Fix. Run the Capy skill installer with --for <workflow> on this machine and launch with the GSTACK_LAUNCH line it prints. GSTACK_ALLOW_UNSUPPORTED_RUNTIME=1 admits anyway (printed as INSTALL_VERDICT: overridden); record it as a deviation.

---

Browser

[browse] this install's browse CLI (<root>, build <hash>) and the gstack checkout's server bundle (<checkout>, build <hash>) are from different builds, so the server was not started. ...

Meaning. On Windows a host runtime root (~/.codex/skills/gstack and the other env-var hosts) holds a copy of browse with no node_modules, so its CLI starts the server bundle in the gstack checkout recorded in .source-path. The checkout was rebuilt (or updated) without refreshing this runtime root, so the two builds differ and browse refuses rather than run a mismatched server.

Fix. Re-run setup from the checkout named in the message; it rebuilds and refreshes every runtime root:

cd <checkout> && ./setup

[browse] chain: no flow to run (stdin was empty) (or stdin is a terminal, stdin could not be read (EAGAIN))

Meaning. browse chain with no arguments runs the JSON flow piped to it. Nothing arrived, so it exits 1 before starting a browser. It used to exit 0 on Windows having run nothing.

Fix. Pipe the flow, or pass it as an argument:

echo '[["goto","https://example.com"],["text"]]' | browse chain
browse chain 'goto https://example.com | text'

Chromium at GSTACK_CHROMIUM_PATH=<path> failed to launch: ...

Meaning. Headless browse and make-pdf now use GSTACK_CHROMIUM_PATH (NixOS, macOS 13). That binary could not start.

Fix. Point GSTACK_CHROMIUM_PATH at a working Chromium, or unset GSTACK_CHROMIUM_PATH to use gstack's bundled one.

Headed Chromium profile <dir> is in use by Chromium PID <pid> (started by PID <ppid>: <name>). ...

Meaning. Headed browse keeps one profile per project (<project>/.gstack/chromium-profile). A live browser owns this one, and browse never kills it. ... is locked by PID <pid> on another host (<host>) means the lock came from another machine through a synced folder.

Fix. Close that browser, or export CHROMIUM_PROFILE=<another dir>. For the other-host case, stop it there, or remove <dir>/SingletonLock once you are sure nothing uses it.

[browse] Headed browse now keeps a profile per project ...

Meaning. First use copies your logins from ~/.gstack/chromium-profile when no browser is using it; otherwise it starts fresh and prints how to import. browse profiles lists them, browse profiles prune --days 30 removes idle ones.

Blocked: <host> is a cloud metadata or link-local address / ... resolves to a cloud metadata or link-local address

Meaning. Browse refuses 169.254.0.0/16 (including container credential endpoints), 100.100.100.200, fe80::/10 and fc00::/7 in every numeric spelling, including after a redirect or a page-driven navigation. The tab is reset to about:blank and the command fails. This cannot be overridden.

forbidden origin from the sidebar terminal

Meaning. The terminal accepts only gstack's extension. A self-built or forked extension has a different ID. BROWSE_EXTENSION_ID is no longer read.

Fix. gstack-config set browse_extension_id <your 32-letter id>.

hint: "<word>" looks like a CSS selector

Meaning. Bare browse type <text> types into the focused element. The first word looked like a selector, so it was typed as text.

Fix. browse type --selector '<sel>' <text> (put text that starts with -- after --).

server-node.mjs not found. Run bun run build (Windows)

Fix. cd <gstack checkout> && bun run build.

[freeze] Hook helpers out of date (partial upgrade?)

Meaning. check-freeze.sh and hook-extract.sh come from different gstack versions.

Fix. cd <gstack checkout> && ./setup (or /unfreeze).

[browse] Could not record the Chromium PID (CDP SystemInfo.getProcessInfo: <error>); browse stop cannot reap a surviving Chromium.

Meaning. For a headless Chromium it launched, browse reads the browser's process id over CDP so browse stop can kill a browser that outlives the server. That read failed or took longer than 2 seconds, so this session's browser is not recorded. Browsers gstack did not launch are never recorded or killed.

Fix. After browse stop, check for a leftover browser with ps aux | grep -i chrom and end it with kill <pid>.

No active page. Use "browse goto <url>" first. (after the last tab was closed outside browse)

Meaning. When every tab was closed outside browse (the headed window's tabs closed by hand, or a page that closed itself), earlier releases failed every later command this way, status and stop included, until the daemon was killed (#3167). Now status and stop answer without opening a tab, and any other command opens one new blank tab first and prints [browse] warning: every tab was closed outside browse, so this command ran on a new blank tab; open your page again with: browse goto <url>.

Fix. browse goto <url> to open your page again.

Fixed in. The first release after v1.91.101.0 (#3167).

browse: every tab was closed outside browse and a new one could not be opened, because the browser or its context is gone (<cause>); fix: run `browse restart` ... (BROWSE_TAB_UNRECOVERABLE)

Meaning. Every tab was closed outside browse and the browser, or its context, is gone too, so browse could not open a tab to run the command. browse status and browse stop still answer.

Fix. browse restart ($B restart inside a gstack skill), then run the command again.

Fixed in. The first release after v1.91.101.0 (#3167).

---

Windows

Windows blocked compiled gstack binaries at launch (Smart App Control or another application-control policy, #2595) / bash: .../browse.exe: Permission denied

Meaning. Known issue (#2595, #2124). gstack compiles five binaries on your machine with Bun: browse, find-browse, design, pdf and gstack-global-discover. They are unsigned, and a binary built on one machine never earns the reputation Smart App Control accepts instead of a signature, so Windows 11 with Smart App Control on refuses to start them. Git Bash reports that as Permission denied, which looks like a file-permission problem but is code integrity (PowerShell says An Application Control policy has blocked this file). setup now runs each binary's --version and names the blocked ones and the skills that need them: the gstack browser fallback (/browse, /qa, /qa-only, /design-review, /canary, /benchmark, /pair-agent, /scrape, /make-pdf), the design binary (/design-consultation, /design-shotgun, /design-html, /plan-design-review) and /retro global. Every other skill works. gstack-doctor shows the same state in its browse bundle and binaries rows. The exact Windows error text has not been verified on a Smart App Control machine; setup prints the raw first line beside its classification.

Fix. There is no per-file allowlist for Smart App Control. Today's options:

• Run gstack inside WSL (wsl --install, then install gstack in the Linux distro). WSL runs gstack's Linux build, which Smart App Control does not check.
• Or turn Smart App Control off in Windows Security > App & browser control > Smart App Control settings. On Windows 11 with the April 2026 update you can turn it back on later without reinstalling Windows; on older builds turning it off is permanent. gstack's binaries stay blocked whenever it is on.

Signed release binaries are the real fix and are tracked in TODOS.md. After Windows allows the binaries, re-run ./setup; the message goes away.

Expected result. setup prints no "Windows blocked" line, and gstack-doctor shows ok for browse bundle and binaries.

setup: -c: line 1: unexpected EOF while looking for matching '"' / setup: -c: line 2: syntax error: unexpected end of file from .\setup.ps1

Meaning. Windows PowerShell 5.1 (powershell.exe, the default PowerShell on Windows) passes arguments to native programs the legacy way and strips the double quotes inside them. Until the release that fixed #3130, setup.ps1 handed Git Bash a bash -c script with double quotes in it, so bash read a broken script and nothing was installed. PowerShell 7.3 and newer were not affected.

Fix. Update gstack (in Git Bash: cd ~/.claude/skills/gstack && git pull --ff-only), then run .\setup.ps1 again: its script no longer holds a double quote. Until then, run ./setup from Git Bash, or .\setup.ps1 from PowerShell 7 (pwsh).

setup.ps1: argument N is empty; setup takes no empty arguments. Nothing was installed or changed. (SETUP_PS1_EMPTY_ARGUMENT; ...)

Meaning. One of the arguments you gave .\setup.ps1 is an empty string (for example '' or an unset variable such as $hostName). setup takes no empty arguments, and the way setup.ps1 hands arguments to Git Bash under Windows PowerShell 5.1 cannot carry one, so it refuses before running anything.

Fix. Drop the empty argument, or give it a value:

.\setup.ps1 --host codex

---

Chromium bootstrap: chromium-install — <bun> x playwright install chromium exited 127 (command not found); install Bun from bun.sh (winget Bun ships no bunx), or skip with ./setup --no-browser (Git Bash) or .\setup.ps1 --no-browser (PowerShell)

Meaning. setup (or bin/gstack-browser-ensure, as BROWSER_UNAVAILABLE <bun> x playwright install chromium exited 127 (command not found)) could not run the Playwright installer: the shell found no command to run. Until the release that fixed #3131, setup called bunx, which a Bun installed with winget does not ship, and reported the failure as exited 127 (offline, proxy, or blocked download?). It now runs bun x through the Bun it resolved, so exit 127 means that Bun itself, or a command it starts, is missing. Skills that do not need a browser are installed either way.

Fix. Install Bun from https://bun.sh (it ships bun and bunx), then run setup again. To install without the browser for now, in Git Bash:

./setup --no-browser

or in Windows PowerShell:

.\setup.ps1 --no-browser

---

gstack: no Git Bash found to run gstack's bash scripts on Windows (tried ...); fix: ... (BASH_UNAVAILABLE)

Meaning. Windows cannot run a shebang script, so gstack hands its bash scripts (gstack-wtree, gstack-slug, the hooks' bins, bash -c commands in regen and pregate selection manifests) to Git Bash. It looks in this order and the message lists every candidate it tried with the reason it was rejected:

1. GSTACK_GIT_BASH (or the older name GSTACK_BASH; when both are set and differ, GSTACK_GIT_BASH wins and a one-line warning says so). A value that does not exist is refused, not skipped.
2. bash next to git --exec-path (finds scoop, per-user and portable Git).
3. C:\Program Files\Git, C:\Program Files (x86)\Git, %LOCALAPPDATA%\Programs\Git and scoop's git\current.
4. A bash on PATH, only when uname -s reports MSYS or MINGW. WSL's bash.exe in System32 or WindowsApps is never used: it reads C:\... paths as Linux paths. A PATH bash that is neither (Cygwin, for example) is no longer used either.

Before #3197 these commands spawned the scripts directly, so gstack-restamp refused with cannot fingerprint the working tree () and gstack-gate-diff and gstack-evidence silently dropped the fingerprint.

Fix. Install Git for Windows (winget install --id Git.Git -e in PowerShell), or point gstack at your bash.exe for good. An export in Git Bash reaches only that shell, so set it where Claude Code reads it:

• Windows PowerShell 5.1 or PowerShell 7, then restart Claude Code:

  [Environment]::SetEnvironmentVariable('GSTACK_GIT_BASH', 'C:\Program Files\Git\bin\bash.exe', 'User')
  

• Or the env block of ~/.claude/settings.json:

  { "env": { "GSTACK_GIT_BASH": "C:/Program Files/Git/bin/bash.exe" } }
  

The hooks cache the bash they found in <state root>/cache/windows-bash.json (keyed by git.exe's path and modification time, rechecked before use); the override is never cached.

Expected result. gstack-restamp --dry-run prints its diff and gstack-gate-diff records a candidate ending in a tree id instead of +nowtree.

---

Memory and gbrain

Every message below is also in docs/gbrain-sync-errors.md with more detail, along with the per-page ingest messages (FAILED, re-queued, quarantined, reconcile progress, kept-on-this-machine notices).

database host unreachable (<code> <host>); your gbrain config is unchanged. Fix: check network or VPN, then re-run /sync-gbrain.

Meaning. A DNS or connection error reaching your gbrain database. It used to look like a broken config, and setup stripped brain features while offline.

Fix. Restore the network or VPN, then /sync-gbrain.

[memory-ingest] ERR: gbrain reported N failure(s) it did not attribute to a staged page ... Refusing to advance state.

What is kept. Nothing is marked saved, so nothing is lost. After three such runs gstack bisects the batch and quarantines the page that breaks it.

Fix. Re-run /sync-gbrain.

[memory-ingest] reconcile: not run (...)

Meaning. After upgrading, gstack re-checks transcripts it had marked saved and re-imports the ones missing from your brain. That check needs a local gbrain.

Fix. /setup-gbrain, then gstack-memory-ingest --reconcile (--dry-run to preview).

[memory-ingest] ERR: another memory ingest (pid <N>) is writing <state file>; not run.

Fix. Wait for it to finish, then re-run /sync-gbrain.

[memory-ingest] ERR: could not save ingest state <path>: <error>.

Fix. Fix permissions or free disk space under your gstack state root, then /sync-gbrain.

[memory-ingest] kept N transcript page(s) for <repo> on this machine: gbrain source <id> ...

On a managed gbrain brain (0.60+), an import lands only in a source bound to a checkout this host owns, so gstack binds each transcript source to its own checkout, <state root>/gbrain-transcript-sources/<id>/, before importing. The partition stays on this machine, unstamped, and imports on a later run when:

• held by another owner: the source is bound to another host or another directory. gstack never takes it over. Inspect it with gbrain sources writer status --source <id> --json; the owner releases it (gbrain sources writer transfer prepare <id> on the owning host) or you re-bind it here with gbrain sources set-path <id> <checkout>.
• the state root is ephemeral (GSTACK_EPHEMERAL=1): a binding would point at a directory that vanishes with the machine. Run with a durable root: GSTACK_STATE_ROOT=<durable directory> gstack-memory-ingest --bulk.
• bound to gstack's checkout, but it is missing or not active: restore the checkout from a backup of the state root, or follow gbrain doctor --json.
• could not bind: the message carries gbrain's refusal; inspect the source with the writer status command above.

curated artifacts pushed to git, but gbrain source <id> has 0 indexed pages. Fix: gbrain sync --source <id>, then re-run /sync-gbrain

Fix. gbrain sync --source <id>, then /sync-gbrain.

dream: skipped — the installed gbrain cannot run only the resolve_symbol_edges phase, and the full dream cycle costs about 35 minutes ...

Meaning. /sync-gbrain --dream (and --full's auto-build) now runs only the call-graph phase. Your gbrain cannot scope it, so nothing ran.

Fix. gstack-gbrain-install, then /sync-gbrain --dream. Or run the full cycle yourself: gbrain dream --source <id>.

call graph for <source>: unknown: installed gbrain does not expose cycle_freshness

Fix. gstack-gbrain-install.

[gbrain-sync] gbrain source <id>: path unavailable (<path>); gstack skips it.

Meaning. A deleted worktree's code source. gstack never removes it on its own.

Fix. Preview, then remove the ones gstack can prove belonged to this machine:

gstack-gbrain-sync --prune-gone-worktrees --dry-run
gstack-gbrain-sync --prune-gone-worktrees

---

Eval reports and pass-rates

These come from the paid eval census reports and bun run eval:pass-rates. The walkthrough for a red census is docs/evals/census-red.md.

eval:pass-rates: unknown flag <flag> / eval:pass-rates: unknown case <id> (not an E2E, judge or paid test file id)

Meaning. The flag or case id is not recognized. The command exits 2 before fetching anything.

Fix. bun run eval:pass-rates --help lists the flags. --case takes a registry id from test/helpers/touchfiles-data.ts or a paid test file path.

unknown failure_cause "<x>" (written by a newer gstack; update this checkout to read it)

Meaning. A trial record names a failure cause this checkout does not know. A newer gstack wrote it.

Fix. git pull (or rebase your branch onto main), then rerun the command.

--case <id>: registered by <file>, <file>; it needs exactly one

Meaning. More than one paid test file registers the case, so test-paid-shards.ts --case cannot pick one file.

Fix. Run the red shard's file directly; the report's after a repair: line prints it: EVALS=1 EVALS_TIER=<tier> bun test <file>.

evidence: <artifact> too large to fetch (<N> MB)

Meaning. The slice artifact holding this red's transcript is over 64 MB, so eval:pass-rates --run does not download it.

Fix. Download it from the run page, or gh api repos/<owner>/<repo>/actions/artifacts/<artifact id>/zip > slice.zip.

[headroom] <case> session <key>: max <s> of <s> (<pct>) over <n> sample(s), above the 85% cap. Cut work in the skill or fixture; budgets are never raised ...

Meaning. eval:pass-rates --gate (the weekly report) found a case whose slowest session used more than 85% of the timeout it armed. It is one timeout away from a red.

Fix. Cut work in the skill or fixture. Budgets are never raised. Check the case with bun run eval:pass-rates --headroom --case <id>.

cost unknown (no billing captured for any of <N> trial(s)) / cost $<x> known + <N> of <M> trial(s) cost unknown

Meaning. PTY and Codex sessions record no billing, so their cost is unknown. Only the known sum is shown.

Fix. None needed; this is informational.

· cause provider_stall: no stream event for <N>s ...

Meaning. The session streamed partial messages, then received no event of any kind for at least 120 seconds while a model request was in flight and no tool, permission prompt, hook or subagent was outstanding. Under EVAL_POLICY v1 it is still a failed trial.

Fix. Inspect it with bun run eval:pass-rates --run <run id> --case <id>. A paid rerun happens only after a repair.

Overlay record with taskCorrect: false and answerError (contract v4)

Meaning. The trial completed with a wrong answer. Under overlay contract v4 that is a valid measurement in the comparison; only an overlay-ON wrong answer fails the case.

Fix. Read answerError in the trial JSON. No rerun is needed.

[detector-corpora] <N> stale entries (refresh from a current census when one fails)

Meaning. Some replay-corpus entries came from an older input series of their case. This is informational; the corpus still replays them.

Fix. When that case goes red in a census, add the new capture to its corpus and check it with bun test test/detector-corpus-<case>.test.ts.

recommendation substance median <x> < 4 over samples [<a>,<b>,<c>] (boilerplate/weak)

Meaning. The auq-matrix case scores each captured question's recommendation with a 3-sample judge panel; fewer than 2 of the 3 samples reached 4, so their median was below 4.

Fix. Read the logged samples and the captured question. A fix goes in the skill text, followed by one diagnostic run of auq-matrix.

---

Push guard (redaction)

db.url_with_password HIGH on a default postgres/postgres login whose host is a service name like @db (pre-push BLOCKED)

Meaning. The default postgres:postgres pair is exempt only on localhost or 127.0.0.1. A service name like @db says nothing about where the URL ends up deployed, so it still blocks.

Fix. Use postgres://postgres:postgres@localhost:5432/... in local and CI config, or read the URL from an env var. If the credential is real, rotate it. Bypass once: GSTACK_REDACT_PREPUSH=skip git push. If the URL is a reviewed, public dev-only value, list it in .gstack-redact-allowlist.

.gstack-redact-allowlist (<n> entries) suppressed <m> finding(s) in this push

Meaning. The pushed commit carries .gstack-redact-allowlist at the repo root. Each line (after trimming; # starts a comment) is one exact matched span: the whole postgres://USER:PASSWORD@host:port URL for db.url_with_password, the key for a key pattern, the address for pii.email. A finding is suppressed only when its matched text equals an entry, so a password alone, a substring, or a different key still reports and still blocks. The hook reads the file from each pushed commit, never the working tree, and ignores a file over 64 KiB. Every push that carries entries prints this line and each suppressed finding's file and line. It works alongside gstack.redact.allowEmail, which stays a local setting.

Fix. Nothing, if every listed suppression is the reviewed value. Remove an entry that no longer applies; rotate a credential that is real.

pii.ip_public MEDIUM on a four-part version number

Meaning. The line does not declare the value as a version.

Fix. Write it as version: 1.2.3.4, "version": "..." or v1.2.3.4. MEDIUM findings do not block pushes.

MEDIUM pii.email <file>:<line> from the pre-push hook

Meaning. The pushed lines add an email address that is not yours and not already in the destination's commit metadata. The hook does not report your own address (git config user.email), addresses listed in gstack.redact.allowEmail, or author and committer addresses (mailmapped too) from the history of the pushed commits, of the remote tip being replaced, and, for a new branch pushed to a configured remote, of that remote's tracking refs. An address only another remote knows still reports. If the hook also printed existing-email suppression was limited for this push, it could not read the history in 5 seconds, so known authors may be listed too.

Fix. Remove the address, or allow it for this repo: git config --add gstack.redact.allowEmail <address>. If it is your own address, check git config user.email. The allowlist only covers pii.email; it never lets a HIGH finding through.

Unattended runs and artifacts

Workflow commands (gstack-artifact, gstack-gate, gstack-autoplan-timing, gstack-review-log --findings) end each error line with a code in parentheses, for example (ARTIFACT_STALE). The codes and anchors come from lib/result-codes.ts; grep the code, not the prose. Every such command shares one exit table: 0 ok, 1 fail, 2 usage, 3 refused or needs a flag. The artifact contract itself is in docs/unattended.md.

ARTIFACT_INVALID_JSON

Meaning. run.json, timing.json or another JSON artifact did not parse.

Fix. Regenerate the run with the tool that writes it. A manifest is never hand-edited; a partial write means the writer was interrupted.

ARTIFACT_UNSUPPORTED_VERSION

Meaning. The artifact's schema_version is one this gstack does not read (gstack-artifact schema <name> prints the versions it validates).

Fix. Upgrade the consumer (/gstack-upgrade) or regenerate the run with this gstack.

ARTIFACT_SCHEMA

Meaning. A required field is missing, has the wrong type, or holds a value outside its enum. The message names the file, row and field.

Fix. Compare the row with gstack-artifact schema <name> and regenerate it.

ARTIFACT_MISSING

Meaning. run.json names an artifact that is not in the run directory.

Fix. Copy the whole run directory, not single files. If the file was never written, rerun the phase that writes it.

ARTIFACT_STALE

Meaning. The file's bytes no longer hash to the value run.json recorded, so the manifest does not describe this file.

Fix. Treat the run as partially rewritten. Regenerate it, or re-bind the file through the tool that wrote it so the manifest is updated with it.

ARTIFACT_PATH_ESCAPE

Meaning. An artifact path resolves outside the run directory: a .. segment, an absolute path, or a symlink that points elsewhere.

Fix. Keep every artifact inside the run directory under a plain relative name. A run directory is copied as one unit; nothing outside it is part of the contract.

ARTIFACT_MALFORMED_JSONL

Meaning. A JSONL artifact has a line, usually the last, that is not one JSON object. The writer was interrupted mid-append.

Fix. Rerun the phase that writes the file. Do not trim the line by hand; the row it held is lost either way, and the manifest hash would change.

ARTIFACT_DUPLICATE_ID

Meaning. Two rows in one file share an id.

Fix. Ids are run-bound (<run>-...) and unique per file. Regenerate the rows with the tool that assigns them.

ARTIFACT_UNBOUND_ID

Meaning. A row id does not start with the run id in run.json, so it could belong to another run.

Fix. Regenerate the row with this run's id.

ARTIFACT_DANGLING_REF

Meaning. A task's findings, blocked_by or depends_on, or a decision's reference, names an id no artifact in this run defines.

Fix. Write the referenced finding, decision or task first, or drop the reference. A depends_on entry may also name a pr label that another task in the file carries.

ARTIFACT_DEPENDENCY_CYCLE

Meaning. Tasks depend on each other in a cycle, so no lane could start.

Fix. Break the cycle in depends_on. The message lists the ids on it.

ARTIFACT_COUNT_MISMATCH

Meaning. A counts value in run.json disagrees with the rows in the file it summarizes (for example counts.findings: 65 beside 64 rows).

Fix. Regenerate run.json after the last row was written. A count never replaces the file; the hash and the rows are the record.

ARTIFACT_RUN_INTERRUPTED

Meaning. run.json.status is not terminal, or a voice is still running/pending. The artifacts describe an unfinished run.

Fix. Resume it (gstack-autoplan resume --out <dir>, PR B-runner) or consume the artifacts as partial and say so.

ARTIFACT_REVIEWER_MISSING

Meaning. A phase in required_phases is absent from phases, a voice has no terminal status, or a completed voice has no bound output file (path and hash) in artifacts.

Fix. Finish the phase. A missing voice is missing coverage; the validator never fills it in as N/A.

ARTIFACT_GUARD_LINE_MISSING

Meaning. The run says session_kind: unattended, but its review-record.md does not carry the GUARD_NOT_INSTALLED line, so the record does not state that publication order was unverified.

Fix. Start the run through gstack-skill-start (it prints the line) and keep the line in the review record.

autoplan guard: not enforced by this host; publication order is unverified (GUARD_NOT_INSTALLED)

Meaning. The autoplan publication hook only executes inside Claude Code. On every other host, and in every unattended session, the hook is present but never runs, so phase publication order rests on the snapshot hashes recorded per phase rather than on the guard.

Fix. Nothing on this host. The line is printed once per run and belongs in the review record; gstack-artifact validate requires it for an unattended run. On Claude Code a missing hook file still denies every guarded call (a broken install must not pass as an absent one).

review-log: status mismatch ... (REVIEW_STATUS_MISMATCH)

Meaning. The row handed to gstack-review-log claims a status, unresolved, issues_found or critical_gaps that the --findings file contradicts (for example status: clean beside open findings). The row was not written.

Fix. Fix the findings file, not the claim, and log again. Omit the claimed fields and let the row be derived from the file.

GATE_REV_STALE

Meaning. The reply names a gate_rev older than the gate list's current revision, so it may answer items that changed.

Fix. Render the current list (gstack-gate render <file>), read it, and reply with the printed gate_rev.

GATE_REPLY_UNPARSED

Meaning. Part of the reply matched no gate item or option. Nothing was applied; the unparsed tokens are listed.

Fix. Reply with all, with <id><option> tokens (d3b uc1a), or with all except <tokens>. A bare yes or no is ambiguous across multi-option items and is never guessed.

ANSWER_BY_REQUIRED

Meaning. gstack-autoplan answer ran in an unattended run without --by, or with a value that is neither human nor agent:<id>. The artifacts must say who answered a gate: an owner typing tokens and an agent relaying or deciding them look identical in decisions.jsonl otherwise. Nothing was applied.

Fix. Re-run with --by human when the owner typed the tokens, or --by agent:<thread or id> when an agent relays or decides. The value is recorded as answered_by on every decision row the reply answers and in the review record's gate line.

Queue-aware ship: policy, restamp, tree receipt, ship receipt

gstack-ship-policy, gstack-restamp, gstack-tree-receipt, gstack-ship-receipt and gstack-evidence bundle|ancestor share the exit table above and end each error line with a code in parentheses. The policy file is described in docs/ship-policy.md; the queue flow in docs/ship-policy.md#stamp-at-merge.

policy source unavailable — fix: git fetch origin <base> --depth=1 (POLICY_SOURCE_UNAVAILABLE)

Meaning. The policy is read from the committed copy on origin/<base>, and that ref does not resolve here (a shallow or detached gate checkout, or a fetch that never happened). The tool exits 3 and never falls back to the working-tree file silently.

Fix. git fetch origin <base> --depth=1, then rerun. To run against the branch's own file deliberately, pass --policy-from head --allow-repo-commands; the receipt then says policy: head (unreviewed).

POLICY_INVALID

Meaning. .gstack/ship-policy.json has an unknown key, a wrong type or a value outside its enum. The message names the key. Unknown keys are errors so a typo never silently means "default".

Fix. gstack-ship-policy validate lists every problem; gstack-ship-policy init --explain prints each key, its meaning and default.

POLICY_CONTAINMENT

Meaning. A repo-controlled input escapes its box: an absolute path or a .. segment in stamp_paths, release_outputs, changelog or mirror; a glob whose expansion passes 512 regex characters; more than 64 entries in a list; a release_tool over 512 characters or holding a newline. At write time the same code names a matched file that resolves through a symlink to outside the repository.

Fix. Keep paths repo-relative, globs short and lists small. A mirror may start with .. (a sibling checkout) but may not contain an interior ...

POLICY_EXISTS

Meaning. gstack-ship-policy init found an existing policy file and wrote nothing.

Fix. Edit the file, or pass --force to replace it with the example.

repo commands not executed (pass --allow-repo-commands) (REPO_COMMANDS_NOT_ALLOWED)

Meaning. The policy declares a command (release_tool), and the tool was run standalone. File presence never authorizes execution: outside /ship and /land-and-deploy a repo-declared command runs only with --allow-repo-commands. The commands were listed and nothing was written.

Fix. Pass --allow-repo-commands when you mean to execute the repo's code (you already do when you run its tests), or drop the release tool.

QUEUE_STALE

Meaning. gstack-restamp was told the base SHA (--expect-base) or the merge order (--expect-order) the allocation assumed, and one of them moved: the base advanced, a predecessor is not merged, or a successor merged first. The JSON result carries expected, actual and recompute.

Fix. Run the printed recompute command, which recomputes the version from the current base, then merge with the server-side head condition (MERGE_CONDITION: sha=<head>).

RESTAMP_VERSION_SOURCE

Meaning. The configured version source (VERSION, .gstack/version-path) is absent, ambiguous or broken at the base revision or on the branch, so there is no version to bump from.

Fix. Create VERSION or pin the manifest path in .gstack/version-path on the base branch. gstack never substitutes 0.0.0.0.

RESTAMP_MERGE_CONFLICT

Meaning. --after <pr> builds the merge of the branch and the predecessor's head in a throwaway worktree, and that merge conflicts. The branch is untouched.

Fix. Merge the predecessor (or the base once it merges) into the branch under /ship Step 3's conflict rules, then run --after again.

RESTAMP_RELEASE_TOOL_FAILED

Meaning. The policy's release_tool exited non-zero inside the staging worktree. The branch was not written; the journal records the stage.

Fix. Run the tool by hand in the repo, fix it, then rerun gstack-restamp.

RESTAMP_OUTPUT_OUTSIDE_ALLOWED

Meaning. The release tool changed a path outside its allowed-output set (the version files, lockfiles, the CHANGELOG, stamp_paths and release_outputs). The restamp refused before writing anything to the branch.

Fix. Add the path to release_outputs on the base branch when it is a legitimate generated output, or stop the tool from writing it.

RESTAMP_CONFLICT

Meaning. While applying or rolling back, a file no longer held the bytes the journal recorded (someone edited it after the stage ran). Overwriting it would lose that edit, so the restamp stopped.

cannot fingerprint the working tree (<detail>); nothing written is the same code before anything was staged: gstack-wtree exited <n>: <reason> carries the helper's own repair (for example a writable TMPDIR), and gstack-wtree could not start: ... is the Windows bash lookup failing (see BASH_UNAVAILABLE).

Fix. Read .gstack/tmp/restamp-journal.json, reconcile the named file by hand, then rerun gstack-restamp (idempotent: a complete stamp is a no-op).

PREDECESSOR MOVED <old> -> <new> — fix: gstack-restamp --after <pr> again (RESTAMP_PREDECESSOR_MOVED)

Meaning. The gate ran on a synthetic tree built against a predecessor head that is no longer that PR's head, so the gated tree is not the tree that will merge. The receipt refuses gate-reuse: eligible.

Fix. gstack-restamp --after <pr> again, gate the new synthetic tree, and read the receipt again.

CHANGELOG_DUPLICATE_HEADING

Meaning. Two sections share one version heading, usually a stamp that re-headed [Unreleased] beside an entry that already carried the version.

Fix. Merge them into one entry under the new version.

CHANGELOG_TOP_MISMATCH

Meaning. After the stamp, the first entry's heading is not the version in VERSION.

Fix. gstack-restamp moves the PR's section to the top; if a hand edit undid that, fix the heading or rerun the restamp.

CHANGELOG_SECTION_MISSING

Meaning. The CHANGELOG has neither an [Unreleased] section nor one headed by the version currently stamped on the branch, so there is nothing to re-head.

Fix. Under stamp-at-merge, write the PR's entry under ## [Unreleased]; the restamp turns it into ## [<version>] - <date>.

gate-reuse: not-eligible (<what changed>) — fix: <rerun command> (GATE_REUSE_NOT_ELIGIBLE)

Meaning. Tree identity alone is not gate evidence. The receipt compares the gated identity (tree modulo stamps, runtime pins, lockfile hash, CI workflow hashes, gate command hash, executed selection, runner image) with the current one and names what differs, or the stamp-sensitive gates that must rerun on the final tree.

Fix. Rerun the named lanes with the printed command on the stamped tree, or pass --force-gate <reason> in /ship to run the full gate again.

EVIDENCE_IDENTITY_UNKNOWN

Meaning. The bundle (or ledger record) lacks a committed tree id, runtime versions, lockfile hashes or the command hash, so no reuse decision can rest on it. Imported assertions without verification count as unknown too.

Fix. Rebuild the bundle on the gate machine after the lanes ran on a committed head: gstack-evidence bundle --out <file> --label <lane>....

EVIDENCE_BUNDLE_INVALID

Meaning. The bundle is not valid JSON or not gstack-evidence-bundle v1.

Fix. Rebuild it with gstack-evidence bundle; a bundle is never hand-edited.

PREREGISTRATION_NOT_ANCESTOR

Meaning. A preregistration_shas entry in the policy is not an ancestor of HEAD, so the preregistered eval does not describe this branch.

Fix. Merge or rebase so the commit is in the branch history, or remove the entry on the base branch. gstack-evidence ancestor <sha>... prints one line per entry; the ship receipt records the result.

HISTORY_POLICY_VIOLATION

Meaning. The policy says history: merge-only and the plan would squash, rebase or otherwise rewrite the branch: gstack-ship-policy check-history --plan squash|rebase refuses (exit 3) before anything moves, and without --plan it reports the violation (exit 1) when the pushed branch is no longer an ancestor of HEAD.

Fix. git merge origin/<base> and keep every commit; merge the PR with a merge commit.

RECEIPT_MISSING

Meaning. gstack-ship-receipt read --pr <n> found no ```gstack-ship-receipt block in the PR body.

Fix. /ship Step 18 writes it (gstack-ship-receipt write ... --pr <n>); for an older PR, write it once by hand with the same command.

RECEIPT_INVALID

Meaning. The block exists but does not validate against the ship-receipt schema (gstack-artifact schema ship-receipt).

Fix. Regenerate it with gstack-ship-receipt write; never hand-edit the block.

EXECUTION_UNKNOWN

Meaning. gstack-autoplan recorded a dispatch intent for an attempt (the prompt was handed to a reviewer) but no terminal record followed: no submit, no cancellation. The runner was killed, or the parent never came back. The provider may have finished and charged; snapshot hashes prove which input was sent, not whether the review completed. The spend ledger keeps the attempt's reservation.

Fix. If the reviewer finished, submit its result with the same attempt id (gstack-autoplan submit --out <dir> --phase <p> --voice <v> --result <file> --model <id> --attempt <id>); a late result is still bound. If it did not, redispatch explicitly with gstack-autoplan next --out <dir> --redispatch <attempt>. resume and next never redispatch an ambiguous attempt on their own.

RUN_LOCKED

Meaning. Another gstack-autoplan process holds <dir>/run.lock (pid, host and start time are in the file). Every mutating command takes the lock for its duration, so two writers never interleave.

Fix. Wait for the owner to exit. If its pid is gone (a killed runner), gstack-autoplan resume --out <dir> takes ownership and reconciles open attempts; a lock whose pid is alive is never stolen.

RUN_NOT_INITIALIZED

Meaning. The --out directory has no run.json written by gstack-autoplan, so submit, status, answer and resume have nothing to act on.

Fix. Start the run with gstack-autoplan next --plan <file> --out <dir>; the first next initializes the run (restore point, active plan, manifest).

PHASE_NOT_AWAITING

Meaning. submit named a phase or voice that is not waiting for a result: the phase is already closed, not yet opened, or the voice already has a bound result.

Fix. Run gstack-autoplan status --out <dir> and submit for the attempt the last next printed (ATTEMPT: ... phase=<p> voice=<v>).

ATTEMPT_MISMATCH

Meaning. The --attempt id is not the open attempt for that phase and voice, or that attempt was already submitted. A result is bound exactly once; a second submit of the same attempt is refused rather than overwriting the first.

Fix. Pass the attempt id printed by next for this voice. To replace a bound result, reopen the phase through answer (a scope-changing choice) or start a new run.

RESULT_RECEIPT_MISSING

Meaning. The result file does not begin with the full-read receipt the prompt asked for: INPUT: <phase> <snapshot sha256>. Either the reviewer did not read the prompt file through EOF, or the result belongs to a different snapshot (the plan changed between dispatch and submit).

Fix. The reviewer's first line must be the INPUT line from its prompt file. If the plan changed, run next again for a fresh snapshot and redispatch; a result for an older snapshot is never bound to the current phase.

RESULT_FINDINGS_MISSING

Meaning. The result has no valid canonical findings block. Every reviewer returns, beside its prose, one fenced block:

```gstack-findings
{"severity":"High","title":"...","file":"lib/x.ts","line":12,"fix":"..."}
```

one JSON object per line with at least severity (Critical, High, Medium, Low, Informational) and title. An empty fence means the reviewer found nothing; a missing fence or a malformed row means the result cannot be reconciled and is refused.

Fix. Ask the reviewer for the fence (the prompt names it), or add the rows from its prose yourself and submit again. Reconciliation runs on these rows, not on the prose; a prose-only review has no completeness check.

MODEL_FAMILY_CONFLICT

Meaning. The outside voice's model is in the same family as the native reviewer (both Anthropic, both OpenAI, ...), or its family cannot be determined from the id. Two voices from one family are one voice; the record says which was which.

Fix. Run the outside voice on a model from another family and pass its id with --model. Families recognized: anthropic, openai, google, xai, deepseek, qwen, zai, moonshot, meta, mistral, minimax. An id the table cannot classify is refused; name the model fully (openai/gpt-6-astra, not astra).

SPEND_CAP_EXCEEDED

Meaning. spent + reserved + next_estimate would exceed --spend-cap. The ledger (<dir>/spend.json) counts unsettled reservations and unknown charges at their reservation, so a crashed attempt keeps its cost held until it is settled or released.

Fix. Raise --spend-cap, settle attempts whose actual cost is known (submit --usage-usd <n>), release attempts that never ran (gstack-autoplan release --attempt <id>), or stop here. Host-dispatched subagent spend is unknown, never zero.

CONSENSUS_MISSING

Meaning. next for the Eng phase found a closed prior phase without its consensus record (<phase>-consensus.md plus its reconciliation rows), so the Eng prompt would be sent without that phase's summary.

Fix. gstack-autoplan resume --out <dir> re-closes the phase through reconciliation. The Eng dispatch is refused until every closed phase has its summary; it is never sent partially.

OUTSIDE_RUNNER_UNAVAILABLE

Meaning. gstack-outside-voice run --runner <r> cannot run here: codex-cli found no codex binary or no login, api found neither OPENAI_API_KEY nor ANTHROPIC_API_KEY for the model's family, or host-subagent was called without --result <file> --model <id>. When another runner is configured (--fallback or GSTACK_OUTSIDE_RUNNER), the line reads codex-cli unavailable; using <runner> and the review proceeds on that runner; it is a full outside voice, not a degraded one. With no other runner, this is missing coverage.

Fix. gstack-codex-login logs Codex in from OPENAI_API_KEY (unattended machines); or set the API key and pass --runner api; or run the review on a cross-family subagent and submit its file with --runner host-subagent --result <file> --model <id>.

REALITY_ROW_MISSING

Meaning. gstack-plan-reality check --phase <p> <review> found no REALITY: <row> … line for a row the review must carry (every tier 1 row: premise-table, already-done, surface-check, binding-decisions, numbers, deferred-asks, pr-count; plus the tier 2 rows whose scope was passed with --scope), or a tier 1 row was marked n/a. The check prints PLAN_REALITY: phase=<p> rows=<n>/<m> missing=<ids> verdict=<v> and exits 1. In an unattended run the verdict is incomplete and the phase does not close; interactively it is repair: produce the missing rows and re-check, at most twice, then warn at the gate with each row still missing.

Fix. gstack-plan-reality rows --phase <p> [--scope <csv>] prints each row's check. Work it and end the review with one line per row, REALITY: <row> pass|finding <summary> <file:line>.

REALITY_RECEIPT_MISSING

Meaning. A REALITY: line names its row and status but carries no receipt. A receipt is path:line, path:line-line or a commit sha; it is what makes the row a check rather than a claim.

Fix. Add where the check was made to the line, for example REALITY: already-done pass 0 hits since 2026-10-09 for bin/gstack-doctor 91bbd9e or REALITY: surface-check finding bun upgrade --version absent on 1.3.14 bin/gstack-capy-install:52.

Pre-gate: generated-file registry, gstack-pregate, issue links

Both tools read their pin file (.gstack/generated.json, .gstack/pregate.json) from origin/<base>, never the working tree, and run repo-declared commands only under --allow-repo-commands or inside /ship. Details: docs/pregate.md.

REGEN_REGISTRY_INVALID

Meaning. .gstack/generated.json is not valid JSON, has an unknown key, a missing id/inputs/outputs, or a duplicate id.

Fix. gstack-regen validate prints every error with its JSON path; compare with gstack-regen init --explain and fix the file on the base branch.

REGEN_CONTAINMENT

Meaning. A registry glob escapes the repository (.., absolute, more than 64 per list) or a command is not one line under 512 bytes.

Fix. Repo-relative globs only; one line per command.

REGEN_STALE

Meaning. A registered output differs from what its command produces in a scratch git worktree of the current tree: the output is stale or hand-edited.

Fix. Run the printed command (gstack-regen write --only <id> does it in place) and commit the outputs. Never hand-merge a generated file: on a conflict take either side, then regenerate.

REGEN_COMMAND_FAILED

Meaning. A registered command exited non-zero in the scratch worktree.

Fix. Run it by hand in the repository and read its output; the scratch worktree has no node_modules of its own, so a command that needs them must reference the repository's (gstack's entries do through bun run).

PREGATE_CONFIG_INVALID

Meaning. .gstack/pregate.json has an unknown key, a wrong type, a glob that escapes the repository, a runner without {files}, or secrets in warn.

Fix. gstack-pregate validate. secrets and required-lane obligations cannot be downgraded; every other check id in warn is honoured only from the base branch's copy.

PREGATE_SECRETS

Meaning. gstack-redact found a HIGH finding, or a MEDIUM finding in the secret category, in the lines this branch adds.

Fix. Rotate the credential, remove it from the added lines (history included), rerun. Not downgradable.

PREGATE_STRAYS

Meaning. A file was added at the repository root, in a new top-level directory, or under a scratch name (zz-*, tmp*, scratch*).

Fix. Delete or move it. An intentional root file goes in strays.allow.

PREGATE_LITERALS

Meaning. A changed exported constant (or a named timeout/retry literal) still appears with its old value in a test file the branch did not update — nightly- and Heavy-only files included.

Fix. Update every listed file:line, or keep the old value.

PREGATE_NO_LANE

Meaning. A touched file maps to no test through static imports, repo-path string literals, the bin/<name> → test/<name>*.test.ts convention or a dependencies declaration. That is a failure, not a pass.

Fix. Add a test that names the file, or declare its lane (an explicit [] for files with no behaviour, such as docs) in .gstack/pregate.json. --explain prints every mapping and why. For a file with no lane it also prints the import specifiers in test files that resolved to no repo file (for example a tsconfig.json paths alias such as @/lib/x whose target is missing) and any extends hop that was not followed (only relative extends, at most 4 hops). If a test does cover the file, declare it under dependencies; if the resolver should have found it, report the specifier as a resolver gap.

PREGATE_LANE_FAILED

Meaning. A local lane the touched files select exited non-zero under set -o pipefail, or reported zero tests (ZERO-RUN).

Fix. Read the printed lane log, fix the failure, rerun gstack-pregate --stage tests. A | tail-hidden exit is still an exit.

PREGATE_INCOMPLETE

Meaning. A check timed out, its tool is unavailable, repo commands were not allowed, or the working tree changed while the check ran. Incomplete is never pass and blocks publication.

Fix. Pass --allow-repo-commands, install the tool, raise --timeout, or keep the tree still, then rerun.

PREGATE_STALLED

Meaning. A test command the lanes check (or a guard, or the --remote gate) launched wrote nothing to its log for the stall timeout (default 300 s, stall_timeout_s in the base branch's .gstack/pregate.json, or --stall-timeout). pregate killed its process group and names the last test file started. The check is incomplete, never pass.

Fix. Open the printed log, find the hang in the named file (a blocked child, a server that never exits, a synchronous wait), fix it and rerun gstack-pregate --stage tests. A test that is legitimately quiet for longer needs a larger --stall-timeout; 0 disables the stall kill and leaves only --timeout.

PREGATE_RECEIPT_INVALID

Meaning. gstack-pregate clear --remote pregate.json/remote_gate --receipt <file> read the remote gate's output and its PREGATE_REMOTE: line is missing, names another tree than the one pregate.json tested, reports 0 tests, or reports failures. The obligation stays uncleared. A run URL alone never clears this obligation; a test_backend/<backend> obligation takes a run URL, recorded as attested rather than validated.

Fix. Run the remote gate on the tree pregate tested and pass its output file with --receipt, or let gstack-pregate --stage tests --remote --spend-cap <usd> --allow-repo-commands run and validate it.

PREGATE_STALE

Meaning. pregate.json was recorded against a different working-tree fingerprint than the one being published (the final stamp, a regen, any edit).

Fix. Rerun gstack-pregate after the final generation and stamp; Step 18 refuses to write the ship receipt otherwise.

PREGATE_REMOTE_UNCLEARED

Meaning. A requires-remote obligation (a platform lane this machine cannot run, named by workflow.yml/job) has no receipt.

Fix. Dispatch that job, then gstack-pregate clear --remote <workflow.yml/job> --run-url <url> (or --bundle-lane <label> from an evidence bundle). The ship receipt carries each obligation with its receipt.

ISSUE_UNREADABLE

Meaning. An issue named by a Fixes #N/Closes #N trailer or --issue N could not be read through gstack-issue-guard.

Fix. Check gh auth status and the number. Until it reads, the link is rendered as Refs #N, never Fixes.

ISSUE_LOOKUP_FAILED

Meaning. gstack-issue-links could not resolve the repository, list the open PRs that close an issue this PR fixes, search the flake issues naming a --ci-run id, or tell this PR's author: gh runs as an app (…[bot]) and neither the HEAD commit (unpushed, or not linked to a GitHub user) nor a user-owned repository names one, so the owner's own open PRs stay in the Related: lines. The closure and reference lines are still printed; --json lists each failure under unavailable.

Fix. Check gh auth status, pass --repo <owner/repo> when the remote is not a GitHub repository and --author <login> when gh runs as an app, then rerun. If it still fails, say in the handoff which lookup is missing; never present the body as complete.

ISSUE_LINKS_MISSING

Meaning. gstack-ship-receipt write --issues @issues.json --body <file> found that the body lacks a Fixes, Refs, Flake:, Related:, Supersedes or Contributed by line the issues object records, so the PR body and its receipt would disagree. Nothing was written.

Fix. Paste every line gstack-issue-links printed under ## Issues in the body (or rerun gstack-issue-links --out if the issue set changed), then rerun the receipt write.

Eval plans, lane ownership, evidence verification, the owner brief

Codes printed by bin/gstack-eval-plan, bin/gstack-lane-check, gstack-evidence verify, bin/gstack-owner-brief, bin/gstack-contributor-mode and bin/gstack-banned-terms (plan E1–E3). Each ends an error line in parentheses; grep the code.

PREREG_INCOMPLETE

Meaning. gstack-eval-plan prereg --check <file> found a required preregistration section missing or empty: ## Bars, ## Arms, ## Decoys, ## Stop rules or ## Held-out exposure (every held-out set the plan touches, its prior exposure and the reservation on it).

Fix. Fill the named sections before any priced call. A plan that cannot name its stop rule or its held-out exposure is not preregistered; the pilot refuses to start without a passing check.

EVAL_PRICE_MISSING

Meaning. An arm's model has no row in lib/pricing.ts, so the admission estimate would be $0, which the ledger would admit without limit.

Fix. Add the row from the provider's pricing page (USD per million tokens with as_of), or drop the arm. The table prices standard text tokens only; see the excluded billing categories in lib/pricing.ts.

EVAL_DRY_RUN_FAILED

Meaning. The $0 stub-model dry run over the real input file found a problem the priced run would have paid for: a row without the fields the prompt needs, an output budget too small for a reasoning model, or no retry prompt text.

Fix. Repair the named rows or flags (--output-budget, --retry-prompt) and rerun gstack-eval-plan dry-run. The checklist it prints is the record the pilot requires.

EVAL_ARMS_UNRESOLVED

Meaning. gstack-models resolve --role eval-arms produced no arm and the repo policy document fallback (--policy-doc, default the first of docs/model-policy.md, MODEL_POLICY.md, docs/MODELS.md) named no priced model.

Fix. Pass --arms <model,model>, point --policy-doc at the document that lists the project's allowed models, or fix the model policy config.

EVAL_BUDGET_EXHAUSTED

Meaning. The ledger refused the next reservation: spent + reserved + unknown charges + the estimate exceeds the cap (SPEND_CAP_EXCEEDED underneath). The run stops with status budget_exhausted; nothing is retried.

Fix. Read the spend table (gstack-eval-plan pilot report), settle or release the open attempts, then raise --cap on purpose or stop.

LANE_CONFLICT

Meaning. gstack-lane-check found a planned file that an in-flight branch or pull request already changes; the line names the PR number, the branch and the hunk count.

Fix. Give the file one owner: wait for that PR to merge, stack this lane on its branch, or drop the file from the plan. Two lanes editing one file is the merge-conflict incident the check exists to prevent.

LANE_REF_UNAVAILABLE

Meaning. A --branch or --pr could not be resolved: the ref is not fetched, or gh is missing or not logged in.

Fix. git fetch origin <branch>, or gh auth status. An unresolved lane is reported as such and never counted as clear.

EVIDENCE_UNVERIFIED

Meaning. gstack-evidence verify <bundle> could not verify a lane claim on this machine: the committed tree differs from the bundle's, the recorded log is absent or its hash differs, or the probe was not rerun.

Fix. Check out the bundle's commit and run --rerun to execute the lane command here, or treat the claim as an imported assertion that never counts toward gate reuse.

BANNED_TERM_FOUND

Meaning. The diff adds a term listed in .gstack/banned-terms.json outside that term's allowed_paths. The finding names the term, the file and line, and the allowed locations.

Fix. Remove the term from the added line or move the text to an allowed path. /review and /document-release run this check on every diff.

BANNED_TERMS_INVALID

Meaning. .gstack/banned-terms.json is not valid: terms must be a non-empty list of strings, and each allowed_paths entry must be a plain repo-relative glob (no .., no absolute path, no symlink escape).

Fix. gstack-banned-terms init writes a commented example with every key at its default; gstack-banned-terms validate checks the file.

CONTRIBUTOR_SOURCE_UNAVAILABLE

Meaning. gstack-contributor-mode detect found no maintainers list in .gstack/ship-policy.json and could not ask the collaborators API (gh missing, not logged in, or no PR author resolvable), so the mode is off and source=off is recorded.

Fix. Add maintainers to the ship policy (the explicit list always wins), run gh auth login, or pass --contributor to force the mode for this review.

BRIEF_INPUT_MISSING

Meaning. gstack-owner-brief render --out <dir> needs gate.json, decisions.jsonl and findings.jsonl in the run directory; one is missing.

Fix. Reach the gate first (gstack-autoplan next --out <dir> until gate_pending); the brief renders what the gate wrote.

DRAFT_DIRECTION_UNRESOLVED

Meaning. The phase-close rewrite found a draft direction stands until the owner decides line whose decision id is still pending, so it was left as is.

Fix. Answer the gate for that id, then rerun gstack-owner-brief close; only decided lines are rewritten, each to its chosen option and the date.

warning: left <n> locally edited file(s) with CRLF line endings that gstack pins to LF

Meaning. Git for Windows checks out with core.autocrlf=true, so gstack's nested shell scripts (skill bin/ helpers, the Claude hook shims, lib/cso/images/*, scripts/app/*) were written with CRLF until .gitattributes pinned them to LF (#3110). Git Bash runs them anyway, but a Linux bash reading the same checkout (a synced tree, WSL, a bind mount) fails with set: pipefail: invalid option name, and a hook that fails that way blocks the tool call it guards. Pulling the new rule does not fix existing copies, because git never rewrites a file whose content did not change. Setup finds those files with one git ls-files --eol pass and checks them out again as LF. It leaves a file you edited locally alone and names it in this warning. The same section covers skipped the CRLF repair (another setup held the install registry lock) and the CRLF repair could not rewrite every file.

Fix. For edited files, stash and restore them; git writes them back with LF and keeps your edits:

cd ~/.claude/skills/gstack && git stash && git stash pop

If the repair was skipped, re-run ./setup once the other setup finishes. If it failed, git checkout -- . && ./setup in the checkout discards local edits and rewrites every file. Use your install directory if it is not ~/.claude/skills/gstack (./setup --status prints it). Expected result: the next ./setup prints no CRLF warning.

Field wave lane CD: pregate guards, regate, sealed output

PREGATE_GUARD_FAILED

Meaning. A guard from the base branch's .gstack/pregate.json (a repo command such as a serial-test manifest check or a CLI golden test) matched a file the branch touched and exited non-zero. Guards cover what the import graph cannot see: manifests, subprocess goldens, registries. They cannot be downgraded to warn.

Fix. Read the guard's lines in the table (exit code, output tail, log path) and do what its fix line says, commit, then rerun gstack-pregate run --allow-repo-commands. A lane reports done only after this passes and carries the PREGATE: line in its handoff.

MIGRATION_COLLISION

Meaning. gstack-pregate regate read migrations (dir, id) from the base branch's .gstack/ship-policy.json and found a migration number this branch adds that the base branch already has, or that another open PR adds under a different file name. Both PRs would pass their own gates and the second merge would break the schema order. When the open-PR lookup cannot finish (gh missing or failing, 1000 open PRs, a PR whose file list GitHub truncates and cannot be fetched in full) the line says MIGRATION_COLLISION: unknown (...) and REGATE: not-needed is withheld.

Fix. Take the next free migration number when this PR is next to merge, rename the file and its id, commit, then rerun gstack-pregate regate --against <gated-head> --bundle <file>. The renamed migration is a code change, so the gate reruns.

SEALED_OUTPUT_REFUSED

Meaning. The repo declares a sealed policy in .gstack/pregate.json (base branch ∪ the pushed commit) and a commit this push publishes adds a sealed path or transcript (binary, empty and later-deleted files included), or adds a line with a sealed-answer marker, a seed or a local home path, and the destination is public or its visibility is unknown (a new or unreadable repository counts as public). An unreadable or malformed sealed policy refuses too. The managed pre-push hook and gstack-pregate sealed print one line per finding: rule, file[:line], commit. They never print the matched text.

Fix. Remove the output from every published commit before the branch reaches the public repository (a later commit that deletes it still publishes it). A reviewed false positive gets one line in the base branch's .gstack/sealed-allow.tsv: rule<TAB>path<TAB>sha<TAB>reason. A private destination sets "visibility": "private" under sealed in the base branch's .gstack/pregate.json. Capy's pull-request tool may not run local hooks, so run gstack-pregate sealed yourself before any push or PR creation.

EVAL_GATE_UNPRICED

Meaning. gstack-eval-plan price-gate found no call-plan file for the paid gate: no --plan-file, no price_file in the base branch's .gstack/pregate.json, or the file has no GSTACK_EVAL_CALLS lines. (A declared price_file missing from HEAD is EVAL_PLAN_STALE, not this.) A gate whose cost is unknown cannot be approved as priced.

Fix. The consuming repo commits a call-plan file in the format of docs/eval-calls.md and names it in price_file. Only when the owner accepts an unpriced gate, rerun with --allow-unpriced "<reason>": it exits 0, prints GATE_UNPRICED_OVERRIDE: <reason> (owner-authorized override; not authorization to spend) and records the reason in the receipt.

EVAL_GATE_OVER_CAP

Meaning. The gate's priced total is above --cap-usd, or one call's reservation (its share of the input plus max_out_tokens) is above --cap-usd, or above --smoke-cap-usd for a scope=smoke row. A provider refuses a reservation the cap cannot hold, so the run would fail after spending.

Fix. Cut questions, arms or max_out_tokens in the call plan and regenerate it, or raise the cap deliberately with the owner. Never split calls to slip under it.

EVAL_PLAN_STALE

Meaning. The call-plan file prices something other than what is being approved: its GSTACK_EVAL_GATE command is not the exact --gate string, its GSTACK_EVAL_HEAD is behind HEAD with files other than the plan file changed since, an input's sha256 at HEAD differs from its GSTACK_EVAL_INPUT line, or the base policy's price_file is not in the HEAD commit. --allow-unpriced does not override it.

Fix. Regenerate the plan file at HEAD for the exact gate command (the repo's own producer), commit it, and rerun gstack-eval-plan price-gate.

PLAN_SECTIONS_INVALID

Meaning. gstack-autoplan next reviews only the plan's ## Implementation plan section and keeps the ## Review record private, so the plan needs exactly one non-empty Implementation plan section followed by one Review record section, both outside code fences. A plan with neither heading is wrapped automatically; one heading alone, duplicate or reversed headings, or an empty section is refused before anything is written. The error names the problem.

Fix. Add the missing heading, or rerun the first next with --scaffold: it writes <out>/plan-source.md with the missing heading added, reviews that copy and prints SCAFFOLDED:. Your plan file is never edited. Duplicate, reversed or empty sections are ambiguous and must be fixed by hand.

PLAN_AMEND_PENDING

Meaning. The owner accepted at least one plan change at the gate (each was printed as an APPLY: line), and the run's plan has not absorbed it, so a rerun would review the old plan. next refuses until every accepted change is incorporated or withdrawn; export refuses a complete run with one pending.

Fix. Edit the plan, then gstack-autoplan revise --out <dir> --plan <file> --incorporates <decision id,...>. revise binds each named id to the old and new Implementation-plan hashes and refuses when the Implementation plan did not change; an id you do not name stays pending. A packaging or ordering change (its APPLY: line ends no plan edit needed: revise --settle <id>) is discharged with gstack-autoplan revise --out <dir> --settle <id> and reopens nothing. To drop an accepted change instead, gstack-autoplan revise --out <dir> --withdraw <decision id> records the withdrawal in the journal.

AMENDMENT_UNKNOWN

Meaning. gstack-autoplan revise --incorporates or --withdraw named a decision id that is not a pending amendment: the owner never accepted it as a plan change at the gate (for example a gate answered before gstack recorded amendments), or it was already incorporated or withdrawn. Nothing was changed.

Fix. Name only the ids the refusal lists after pending:. With none pending, revise without --incorporates: gstack-autoplan revise --out <dir> --plan <file>.

AMENDMENT_NOT_SETTLEABLE

Meaning. gstack-autoplan revise --settle <id> discharges an accepted change without a plan edit, which is honest only for a packaging or ordering change (the gate item's changes is packaging or ordering) on the plan the run already reviews: the plan the owner accepted it on, or one a later revise recorded. The named change alters scope, cost or direction, names no changes value, the plan file has edits no revise has recorded, or --settle came with a --plan that changes the Implementation plan while incorporating nothing. Nothing was changed.

Fix. Edit the plan, then gstack-autoplan revise --out <dir> --plan <file> --incorporates <decision id>, adding --settle <id> to settle packaging or ordering changes in the same call (or settle them after the revise). The APPLY: line for each change says which path it takes, and NEXT: lists the settle step first.

GATE_REC_STALE

Meaning. gstack-autoplan recommend changed a recommendation after the gate was rendered, so a rec (or all) reply the owner gave to the earlier render would take recommendations they never saw. Every render prints rec_hash=<h>; once recommend has run, a rec answer must name the hash of the render the owner answered. The same refusal meets a rec/all reply to a gate written before rec existed (a gate.json with no rec_rev, from 1.91.101.0 or earlier): that render told the owner all leaves items recommended b pending, and all now takes them.

Fix. Render again (gstack-gate render <dir>/gate.json --all), relay it, and answer with --rec-hash <h> from that render. Explicit <id><option> tokens are never refused.

CHECKPOINT_INVALID

Meaning. gstack-autoplan resume --out <dir> --from <checkpoint> found no generation it can restore: a checkpoint.json is unreadable or not a schema_version 1 checkpoint, a listed file is missing, is not a regular file, escapes the generation (an .. path or a symlinked directory), or does not match its recorded sha256; or the staged run does not pass gstack-artifact validate. --from naming a run's collection restores the newest generation that verifies, skipping corrupt newer ones; a root holding several runs must name one. Nothing was written to --out.

Fix. gstack-autoplan checkpoints --from <dir> lists every generation with hash=ok or hash=bad (<reason>); restore an intact one by passing its directory. With GSTACK_AUTOPLAN_CHECKPOINT_DIR set, every command that leaves the run at rest publishes a new generation and keeps the previous one.

CHECKPOINT_OVERLAP

Meaning. The checkpoint directory for this run and the run directory (or, on restore, the checkpoint and --out or its staging directory) are the same directory or one contains the other, after resolving symlinks. Copying one into the other would replace or delete the live run, so nothing was touched. A checkpoint refusal after a committed command prints CHECKPOINT: failed … on stderr and leaves that command's exit code alone.

Fix. Point GSTACK_AUTOPLAN_CHECKPOINT_DIR (or --from / --out) at a directory outside the run, for example the private project-user Drive folder.

CHECKPOINT_TARGET_EXISTS

Meaning. resume --from restores only into a missing or empty --out directory, and this one already holds files.

Fix. Pass a new --out directory, or run `gstack-autoplan resume --out

` without `--from` to resume the run already there.

OWNER_REPLY_REQUIRED

Meaning. An agent answered the gate (--by agent:<id>) without recording what the owner actually said. Nothing was applied.

Fix. Pass the owner's words verbatim: --owner-reply "<text>", --owner-reply - to read them from stdin, or --owner-reply-file <path>. They are stored on every decision row; when they parse under the gate grammar they must resolve to the same choices as --reply.

GATE_OWNER_REPLY_MISMATCH

Meaning. The owner's verbatim reply is itself a gate reply (for example rec), and it resolves to different choices than the tokens the agent relayed. Nothing was applied.

Fix. Relay what the owner chose; passing their reply as --reply is always consistent. When the owner's words and your tokens disagree, ask the owner.

GSTACK_VERSION_CHANGED

Meaning. run.json.gstack_version names a different gstack than the one running. For an older run (or one written before the field existed) this is a notice: the command journals gstack_version_changed, runs the forward migrations (for example rewriting decision ids minted before 1.91.95) and continues. For a run written by a newer gstack the command refuses, because an older runner cannot know the newer state.

Fix. Nothing for the notice. For the refusal, upgrade gstack (bin/gstack-upgrade) on this machine and rerun the command.

ARTIFACT_GATE_UNSETTLED

Meaning. gstack-artifact validate found a run whose status is complete while an approval item of its last gate revision is still pending, or an accepted plan change (run.json.amendments) is still pending. The runner never writes that state; it comes from a hand edit or an older runner.

Fix. Answer the gate with gstack-autoplan answer until no approval is pending, and revise --incorporates or --withdraw each pending amendment.

ios-qa launch: GSTACK_IOS_LAUNCH_ENV ... so the app was not launched (<detail>); fix: ... (IOS_LAUNCH_ENV_INVALID)

Meaning. gstack-ios-qa-daemon forwards GSTACK_IOS_LAUNCH_ENV to xcrun devicectl device process launch --environment-variables whenever it launches the app under test. The value must be a JSON object whose keys are environment variable names and whose values are strings, and it may not set a GSTACK_ variable (that namespace belongs to the debug bridge). Anything else (invalid JSON, an array, a number value, a GSTACK_ key) refuses the launch, because launching without the variables an env-gated debug bridge needs would look like a working app with no bridge. The detail names the key and its type, never a value. Added in the release after v1.91.101.0.

Fix. In the shell that starts the daemon (macOS Terminal or Claude Code on the Mac with the device):

export GSTACK_IOS_LAUNCH_ENV='{"DEBUG_BRIDGE":"1"}'

or unset GSTACK_IOS_LAUNCH_ENV, then restart gstack-ios-qa-daemon.

Outside voice unavailable: <cause>. Fix: <fix>. Continuing to ... (OUTSIDE_VOICE_UNAVAILABLE)

Meaning. /plan-ceo-review, /plan-eng-review or /plan-devex-review ran without a second opinion. The outside provider (Codex, or Claude Code under the Codex host) did not run or failed, and the native fallback could not supply a bounded review either. That fallback dispatches the built-in Plan subagent in the background next to a five-minute background timer, and stops whichever is still running when the other ends. The cause names which part was missing: Plan agent type not offered, TaskStop not offered, background tasks unavailable, no complete report within five minutes, or a failed status. The review-log row carries the same cause as unavailable_reason. Claude Code 2.1.277 removed the TaskOutput tool the fallback used before, so on older gstack every native fallback on current Claude Code ended here.

What is kept. The native plan review itself is complete. The row is recorded with status: unavailable, never as a clean review; a late or partial reviewer result is not counted.

Fix. Repair the provider the line names: install it, or run codex login (in your terminal or Git Bash). For the native fallback, run Claude Code 2.1.277 or later with background tasks enabled (CLAUDE_CODE_DISABLE_BACKGROUND_TASKS unset, not in bare mode). Then re-run the review.

Expected result. An OUTSIDE VOICE (...) report, or CODEX SAYS (plan review — outside voice) when the provider runs.

POLICY_GSTACK_TOO_OLD

Meaning. .gstack/ship-policy.json on the base branch sets min_gstack_version above the gstack reading it. The policy uses keys this gstack would read differently or not at all, so every ship-policy reader (gstack-restamp, gstack-tree-receipt, gstack-ship-queue, gstack-ship-policy) refuses it instead of guessing. A gstack older than min_gstack_version itself sees that key as unknown and fails with POLICY_INVALID, which names the key.

Fix. Upgrade gstack to the version the message names (bin/gstack-upgrade, or rerun the session install), then rerun. A crew lead raising min_gstack_version raises the crew's install floor at the same time; gstack-ship-policy validate prints MIN_READER: for exactly that.

QUEUE_NOT_READY

Meaning. gstack-ship-queue ready will not print a READY block the coordinator could misread: the working tree has uncommitted tracked changes, HEAD is not the PR's pushed head (read through gh pr view), CI at that exact head is not green (failed, pending or unreadable), or the pregate result is missing, failed or recorded on another tree (PREGATE_STALE).

Fix. Commit and push, wait for CI on that head, rerun gstack-pregate run --allow-repo-commands when the tree changed, then rerun gstack-ship-queue ready --pr <n>. The block it prints before refusing shows which line is not yet true.

QUEUE_PROOF_MISSING

Meaning. A queue step lacks an input it needs to prove its claim, or an input does not match: the gated head is not a commit here, HEAD differs from the gated head beyond stamps (the gate never covered this tree), an earlier stamp with other inputs is unfinished, the stamp journal's head moved, or a gate-ahead merge could not be recomputed with git merge-tree. Nothing was written unless the QUEUE_STAMP_REFUSED: line says committed=yes.

Fix. Supply the named input (fetch the gated head, pass the current base sha), or regate the tree you mean to stamp. For an unfinished stamp, rerun the identical command to resume, or revert its files and delete .gstack/tmp/ship-queue/stamp-<pr>.json.

QUEUE_STAMP_NOT_STAMP_ONLY

Meaning. gstack-ship-queue stamp committed the stamp, and the tree receipt between the gated head and the stamped head found a difference outside the stamp rules (the residual paths are printed). The gate's result does not cover that head. The refusal line says committed=yes <sha>.

Fix. Inspect the residual paths: drop the stray edit and stamp again, or run the gate on the stamped head.

QUEUE_VERIFY_MISMATCH

Meaning. The coordinator's gstack-ship-queue verify could not reproduce the lane's claim from the PR's pushed commits: the head moved, the head differs from the gated tree beyond stamps, the receipt digest differs from the one in QUEUE_STAMP, or, for a gate-ahead record, git merge-tree --write-tree gives another merge tree, the recorded stamp patch does not rebuild the recorded gated tree or changes more than stamps, or the predecessor PR moved after the gate.

Fix. Do not merge. Ask the lane to rerun gstack-ship-queue stamp (or gate-ahead) on the current queue and report again.

QUEUE_GATE_MISSING

Meaning. The ship policy sets full_e2e: true, and no passing full-gate result is bound to the tree being stamped or verified: no recorded gate-ahead attempt for that gated head, no --gate-exit 0 --gate-log <file> from a run on it, or the recorded run exited non-zero.

Fix. Run the gate the policy's gate_command names in the gate-ahead worktree and bind it with gstack-ship-queue gate-ahead --record, or pass the exit code and log of a passing run on the gated head to stamp.

GATE_AHEAD_ATTEMPT_INVALID

Meaning. gstack-ship-queue gate-ahead --record could not bind the gate result: the attempt id is unknown for that PR, the attempt already holds a different result, the log file is missing, or the attempt's worktree no longer holds the gated commit (its HEAD moved or a tracked file changed), so the result would not describe the gated tree.

Fix. gstack-ship-queue gate-ahead --list --pr <n> shows every attempt and the current one. Record the live attempt, or prepare a new one with gate-ahead --after <pr> and run the gate there without editing tracked files.