gstack/bin/gstack-session-update

#!/usr/bin/env bash
# gstack-session-update — auto-update gstack on session start (team mode)
#
# Called by Claude Code SessionStart hook. Must be fast and non-fatal.
# The entire update runs in background (forked). The hook itself exits
# immediately so session startup is never delayed.
#
# Before the live checkout moves, the updater fetches, reads the incoming
# release's Bun floor (bin/gstack-bun-version.sh) and checks the `bun` setup
# will run; below it the update is held with reason bun-too-old and nothing
# changes (E1). Then it parse-checks every hook the incoming revision registers
# (bin/gstack-hook-check on that revision, extracted through a private index
# with symlinks as plain files, never tar: MSYS tar cannot create a link
# before its target, #3184): Claude Code runs
# hooks straight from this checkout, so an unparseable hook would block tool
# calls the moment the checkout moved. The incoming revision's own checker
# decides; the installed one decides only when that gives no verified report.
# A failure holds the update with reason hook-does-not-parse and its
# file:line; no verified report from either holds it as
# hook-check-unavailable. Updaters older than a check cannot protect their
# first pull.
#
# The fast-forward itself is bin/gstack-ff-update: edits that conflict with
# the release are shelved in refs/gstack/rescue/<oid>, never left as conflict
# markers, and the next session start names them (at most once a day).
#
# Stages (B11): pull, setup and migrations are tracked separately. The
# "just upgraded" marker is written only when every stage succeeded. A failed
# stage is persisted in $STATE_DIR/session-update-pending and retried even
# when HEAD did not move, with backoff (the update-check interval, then 6h,
# then 24h). While a stage is pending, each session start prints one line
# naming it and the repair command; nothing else is ever printed.
#
# Exit 0 always — errors must never block a Claude Code session.

set +e

GSTACK_DIR="${GSTACK_DIR:-$HOME/.claude/skills/gstack}"
# Hook: source the state-root twin (never spawn gstack-paths); a broken
# install exits 0 silently, like every other error here.
. "$(cd "$(dirname "$0")" && pwd)/gstack-state-root.sh" 2>/dev/null || exit 0  # best-effort: must never block a session start
STATE_DIR="$(gstack_state_root; printf x)"; STATE_DIR="${STATE_DIR%x}"

# Egress receipt helpers (_receipted_git): fail-open — an update pull must
# never block a session over a receipt hiccup.
. "$(cd "$(dirname "$0")" && pwd)/gstack-egress-lib.sh"
# Bun floor comparison (E1): the incoming release's floor is applied before
# the live checkout moves. Missing helper fails open, like every error here.
. "$(cd "$(dirname "$0")" && pwd)/gstack-bun-version.sh" 2>/dev/null
THROTTLE_FILE="$STATE_DIR/.last-session-update"
LOCK_DIR="$STATE_DIR/.setup-lock"
LOG_FILE="$STATE_DIR/analytics/session-update.log"
PENDING_FILE="$STATE_DIR/session-update-pending"
HOOK_CHECK="$(cd "$(dirname "$0")" && pwd)/gstack-hook-check"
FF_UPDATE="$(cd "$(dirname "$0")" && pwd)/gstack-ff-update"
LEASE="$(cd "$(dirname "$0")" && pwd)/gstack-lease"
RESCUE_FILE="$STATE_DIR/session-update-rescues"
# Path spelling (Git Bash /c/x vs native C:/x) for the held-reason prefix strip.
. "$(cd "$(dirname "$0")" && pwd)/gstack-path-spelling.sh" 2>/dev/null || { gstack_path_shell() { printf '%s\n' "$1"; }; gstack_path_native() { printf '%s\n' "$1"; }; }
THROTTLE_SECONDS=3600  # 1 hour

log_entry() {
  mkdir -p "$(dirname "$LOG_FILE")"
  echo "$(date -u +%Y-%m-%dT%H:%M:%SZ) $1" >> "$LOG_FILE" 2>/dev/null || true  # best-effort: logging never blocks a session
}
# Twin: ff_flatten in bin/gstack-ff-update (test-pinned). One line, no
# control characters or escape sequences, at most <max> bytes.
ff_flatten() {
  _ff_esc=$(printf '\033')
  printf '%s' "$1" | tr '\n\r\t' '   ' | sed "s/${_ff_esc}\[[0-9;?]*[ -\/]*[@-~]//g" | tr -d '\000-\037\177' | head -c "${2:-200}"
}
sq() { printf "'%s'" "$(printf '%s' "$1" | sed "s/'/'\\\\''/g")"; }
# hook_report <checker> <tree> — sets _hr_out to the checker's report on
# <tree> and returns 0 only when the report is verified and complete: exit 0
# with no fail line or exit 1 with one, every line `ok|missing <hook>` or
# `fail <hook> <where>: <why>`, and a line for each hook its own --list names. An empty list counts only from the
# installed checker (a tree without hooks). A crash, empty output or an
# unparseable report returns 1 with the reason in _hr_why. (No command
# substitution around it: the variables must reach the caller.)
hook_report() {
  _hr_why="" _hr_rc=0
  _hr_list=$(bash "$1" --list "$2" 2>/dev/null) || { _hr_why="--list exited $?"; return 1; }
  if [ -z "$_hr_list" ] && [ "$1" != "$HOOK_CHECK" ]; then _hr_why="empty hook list"; return 1; fi
  _hr_out=$(bash "$1" "$2" 2>"$_hc_dir.err") || _hr_rc=$?
  case "$_hr_rc" in
    0|1) ;;
    *) _hr_why="exited $_hr_rc$(head -1 "$_hc_dir.err" 2>/dev/null | head -c 160 | sed 's/^/: /')"; rm -f "$_hc_dir.err"; return 1 ;;
  esac
  rm -f "$_hc_dir.err"
  if ! printf '%s\n' "$_hr_out" | HR_LIST="$_hr_list" HR_RC="$_hr_rc" awk '
    BEGIN { n = split(ENVIRON["HR_LIST"], h, "\n"); for (i = 1; i <= n; i++) if (h[i] != "") want[h[i]] = 1 }
    $0 == "" { next }
    /^fail [^ ]+ .+: / { if (!($2 in want)) bad = 1; failed[$2] = 1; any = 1; next }
    /^(ok|missing) [^ ]+$/ { if (!($2 in want) || passed[$2]++) bad = 1; next }
    { bad = 1 }
    END {
      for (k in want) if ((k in passed) == (k in failed)) bad = 1
      if (bad || (ENVIRON["HR_RC"] == 1) != (any == 1)) exit 1
    }'; then
    _hr_why="unparseable or incomplete report"
    return 1
  fi
}
# hook_incoming_hold <rev> — parse-check the hooks of <rev> before the live
# checkout moves. <rev> is extracted without tar and without symlinks: a
# private index (the real one is never touched) and checkout-index with
# core.symlinks=false, so a link becomes a plain file holding its target
# path, which the hook check never reads (test/session-update-hook-hold.test.ts
# keeps hooked paths and their imports free of symlinks). The incoming revision's own
# bin/gstack-hook-check decides, so one checker bug in this install cannot hold
# every later release; when it gives no verified report (crash, empty output,
# unparseable), the installed checker decides. Prints the held reason and
# returns 0 when a hook does not parse or neither checker gave a verified
# report; otherwise prints nothing and returns 1. A pass from the incoming
# checker that the installed one disputes is logged.
hook_incoming_hold() {
  _hc_dir=$(mktemp -d "${TMPDIR:-/tmp}/gstack-session-hooks-XXXXXX" 2>/dev/null) \
    || { echo "hook-check-unavailable: cannot create a temp directory under ${TMPDIR:-/tmp}"; return 0; }
  _hc_out="" _hc_why=""
  if ! ( export GIT_INDEX_FILE="$_hc_dir.index"
         git -C "$GSTACK_DIR" read-tree "$1" && git -C "$GSTACK_DIR" -c core.symlinks=false checkout-index -a --prefix="$_hc_dir/" ) 2>"$_hc_dir.err"; then
    _hc_why="cannot extract the incoming revision: $(ff_flatten "$(head -c 200 "$_hc_dir.err" 2>/dev/null)" 200)"
  elif [ -f "$_hc_dir/bin/gstack-hook-check" ] && hook_report "$_hc_dir/bin/gstack-hook-check" "$_hc_dir"; then
    _hc_out=$_hr_out
    if ! printf '%s\n' "$_hc_out" | grep -q '^fail '; then
      if hook_report "$HOOK_CHECK" "$_hc_dir"; then
        _hc_inst=$(printf '%s\n' "$_hr_out" | sed -n 's/^fail [^ ]* //p' | head -1)
      else
        _hc_inst="no verified report ($_hr_why)"
      fi
      [ -z "$_hc_inst" ] || log_entry "HOOK_CHECK_DISAGREE incoming=pass installed=$(hook_hold_path "$_hc_inst" | head -c 200) rev=$1"
    fi
  else
    [ -f "$_hc_dir/bin/gstack-hook-check" ] && log_entry "HOOK_CHECK_FALLBACK incoming checker gave no verified report ($_hr_why); the installed checker decides rev=$1"
    if hook_report "$HOOK_CHECK" "$_hc_dir"; then
      _hc_out=$_hr_out
    else
      _hc_why="the installed bin/gstack-hook-check gave no verified report either ($_hr_why)"
    fi
  fi
  _hc_fail=$(hook_hold_path "$(printf '%s\n' "$_hc_out" | sed -n 's/^fail [^ ]* //p' | head -1)")
  rm -rf "$_hc_dir" "$_hc_dir.err" "$_hc_dir.index"
  if [ -n "$_hc_why" ]; then
    printf 'hook-check-unavailable: %s\n' "$_hc_why" | head -c 300
    return 0
  fi
  [ -n "$_hc_fail" ] || return 1
  printf 'hook-does-not-parse: %s\n' "$_hc_fail" | head -c 300
}
# hook_hold_path <text> — <text> without the archive directory's prefix, in
# each spelling a checker reports it (/tmp/x, /c/…/x or C:/…/x).
hook_hold_path() {
  _hp=$1
  for _hp_dir in "$_hc_dir" "$(gstack_path_shell "$_hc_dir")" "$(gstack_path_native "$_hc_dir")"; do
    _hp=${_hp#"$_hp_dir"/}
  done
  printf '%s\n' "$_hp"
}
# rescue_note <ref> <unmerged> — remember a rescue for the session-start
# banner (shown at most once a day until the ref is deleted).
rescue_note() {
  grep -q "^$1 " "$RESCUE_FILE" 2>/dev/null && return 0
  printf '%s %s -\n' "$1" "$2" >> "$RESCUE_FILE" 2>/dev/null
}
pending_get() { sed -n "s/^$1=//p" "$PENDING_FILE" 2>/dev/null | head -1; }
# pending_save — persist the P_* stage state; nothing pending removes the file.
pending_save() {
  if [ -z "$P_STAGES" ] && [ -z "$P_PULL" ]; then rm -f "$PENDING_FILE"; return 0; fi
  printf 'stages=%s\nfrom=%s\nfailures=%s\nnext=%s\nreason=%s\npull=%s\n' \
    "$P_STAGES" "$P_FROM" "$P_FAILURES" "$P_NEXT" "$P_REASON" "$P_PULL" > "$PENDING_FILE.tmp.$$" \
    && mv -f "$PENDING_FILE.tmp.$$" "$PENDING_FILE"
}

# ── Guard: gstack must be a git repo ──
if [ ! -d "$GSTACK_DIR/.git" ]; then
  exit 0
fi

# ── Guard: team mode must be enabled ──
AUTO=$("$GSTACK_DIR/bin/gstack-config" get auto_upgrade 2>/dev/null || true)
if [ "$AUTO" != "true" ]; then
  exit 0
fi

# ── Session-start lines: a held update first, then a stage that did not
# finish, then edits a recovery shelved (daily). Each names its fix; every
# path in a printed command is shell-quoted. ──
_Q=$(sq "$GSTACK_DIR")
_WHERE="in a terminal; Git Bash on Windows"
# A printed instruction (the egress tripwire skips printf lines): nothing runs it here.
_FF_FIX=$(
  printf "cd %s && git fetch origin && bash bin/gstack-ff-update . '@{upstream}' && ./setup" "$_Q")
_P_PULL="" _P_STAGES=""
if [ -f "$PENDING_FILE" ]; then
  _P_STAGES="$(pending_get stages)"; _P_REASON="$(pending_get reason)"; _P_PULL="$(pending_get pull)"
fi
# Unmerged files in the install: no stage fix, only the rescue-first recovery.
_UNM=$(git -C "$GSTACK_DIR" ls-files -u 2>/dev/null | head -1 | cut -f2-)
if [ -n "$_UNM" ]; then
  _P_STAGES=""
  case "$_P_PULL" in unmerged-files*) ;; *) _P_PULL="unmerged-files: the install has unmerged files (first: $_UNM)" ;; esac
fi
case "$_P_PULL" in
  "") ;;
  bun-too-old*)
    echo "gstack auto-update: update held ($_P_PULL); nothing was installed or changed. Fix now ($_WHERE): bun upgrade && $_FF_FIX" ;;
  bun-version-unreadable*)
    echo "gstack auto-update: update held ($_P_PULL); nothing was installed or changed. Fix now: reinstall Bun (curl -fsSL https://bun.sh/install | bash), check that bun --version prints a version, then cd $GSTACK_DIR && git pull --ff-only && ./setup. https://github.com/garrytan/gstack/blob/main/docs/troubleshooting.md#bun-version-unreadable" ;;
  hook-does-not-parse*)
    echo "gstack auto-update: update held ($_P_PULL); nothing was installed or changed, and your current hooks keep running. This is a gstack bug; report ${_P_PULL#hook-does-not-parse: } at https://github.com/garrytan/gstack/issues. gstack retries at the next check. https://github.com/garrytan/gstack/blob/main/docs/troubleshooting.md#auto-update-hook-does-not-parse" ;;
  hook-check-unavailable*)
    echo "gstack auto-update: update held ($_P_PULL); nothing was installed or changed, and your current hooks keep running. gstack retries at the next check. Fix now ($_WHERE): $_FF_FIX (setup checks every hook it registers). https://github.com/garrytan/gstack/blob/main/docs/troubleshooting.md#auto-update-hook-check-unavailable" ;;
  unmerged-files*)
    echo "gstack auto-update: update held ($_P_PULL); an earlier merge, rebase or stash pop left conflicts in the install, and an update would bury them. Fix now ($_WHERE): $_FF_FIX (saves every edit, the unmerged files included, in a rescue ref before it updates). https://github.com/garrytan/gstack/blob/main/docs/troubleshooting.md#auto-update-unmerged-files" ;;
  autostash-unrecoverable*)
    echo "gstack auto-update: update held ($_P_PULL); your local edits are where they were and nothing was installed. Look first: git -C $_Q status --short. Fix now ($_WHERE): $_FF_FIX (once the cause above is gone). https://github.com/garrytan/gstack/blob/main/docs/troubleshooting.md#auto-update-autostash-unrecoverable" ;;
  *)
    echo "gstack auto-update: git pull did not finish ($_P_PULL); gstack is not updating. Fix now ($_WHERE): $_FF_FIX" ;;
esac
if [ -n "$_P_STAGES" ]; then
  _P_FIX="cd $_Q && ./setup"
  case "$_P_REASON" in bun*) _P_FIX="install Bun (https://bun.sh), then $_P_FIX" ;; esac
  echo "gstack auto-update: ${_P_STAGES} did not finish (${_P_REASON:-unknown reason}); installed skills may be out of date. gstack retries automatically. Fix now: $_P_FIX"
fi
if [ -s "$RESCUE_FILE" ]; then
  _TODAY=$(date -u +%Y-%m-%d)
  : > "$RESCUE_FILE.tmp.$$"
  while read -r _R_REF _R_UNM _R_SHOWN; do
    [ -n "$_R_REF" ] && git -C "$GSTACK_DIR" rev-parse -q --verify "$_R_REF^{commit}" >/dev/null 2>&1 || continue
    if [ "$_R_SHOWN" != "$_TODAY" ]; then
      _R_FILES=$(git -C "$GSTACK_DIR" diff --name-only "$_R_REF^" "$_R_REF" 2>/dev/null)
      _R_N=$(printf '%s\n' "$_R_FILES" | grep -c .)
      _R_LIST=$(printf '%s\n' "$_R_FILES" | head -3 | paste -sd, - | sed 's/,/, /g')
      [ "$_R_N" -gt 3 ] && _R_LIST="$_R_LIST and $((_R_N - 3)) more"
      _R_NOTE=""
      [ "$_R_UNM" = 1 ] && _R_NOTE=" It includes files that were already unmerged: it needs manual resolution."
      echo "gstack auto-update: your local edits in the install ($(ff_flatten "$_R_LIST" 300)) conflicted with an update, so they were saved in $_R_REF and the install runs the update.$_R_NOTE Inspect ($_WHERE): git -C $_Q show --stat '$_R_REF'. To keep them, export only your changes and apply them in a scratch checkout, not in the install: git -C $_Q diff '$_R_REF^' '$_R_REF' > ~/gstack-local-edits.patch, then git apply -3 ~/gstack-local-edits.patch. Delete when done: git -C $_Q update-ref -d '$_R_REF'. https://github.com/garrytan/gstack/blob/main/docs/troubleshooting.md#auto-update-rescued-edits"
      _R_SHOWN=$_TODAY
    fi
    printf '%s %s %s\n' "$_R_REF" "$_R_UNM" "$_R_SHOWN" >> "$RESCUE_FILE.tmp.$$"
  done < "$RESCUE_FILE"
  if [ -s "$RESCUE_FILE.tmp.$$" ]; then mv -f "$RESCUE_FILE.tmp.$$" "$RESCUE_FILE"; else rm -f "$RESCUE_FILE.tmp.$$" "$RESCUE_FILE"; fi
fi

# ── Throttle: skip if checked recently ──
if [ -f "$THROTTLE_FILE" ]; then
  LAST=$(cat "$THROTTLE_FILE" 2>/dev/null || echo 0)
  NOW=$(date +%s)
  ELAPSED=$(( NOW - LAST ))
  if [ "$ELAPSED" -lt "$THROTTLE_SECONDS" ]; then
    exit 0
  fi
fi

# The caller's own session never counts as a lease holder (#3363). Resolve its
# harness pid now, the same way bin/gstack-skill-start names the pid it leases:
# once this hook exits, the background updater's $$ names a dead process and
# an ancestry walk from it excludes nothing.
. "$(cd "$(dirname "$0")" && pwd)/gstack-harness-pid.sh" 2>/dev/null || gstack_harness_pid() { printf '%s\n' "$1"; }
CALLER_PID=$(gstack_harness_pid "$PPID")

# ── Fork to background: zero latency on session start ──
(
  # Prevent git from prompting for credentials (would hang the background process)
  export GIT_TERMINAL_PROMPT=0

  mkdir -p "$STATE_DIR"

  # ── Acquire lockfile (skip if another session is running setup) ──
  #
  # Staleness has two independent detectors (#2613):
  #  1. PID liveness — the pidfile records the HOLDER subshell's PID and a
  #     dead PID means reclaim. ($BASHPID, never $$: $$ expands to the PARENT
  #     hook's PID even inside this backgrounded subshell, and the parent
  #     exits immediately — so every later session judged the lock stale and
  #     rm -rf'd a LIVE holder's lock, letting concurrent updaters in.)
  #  2. Hard TTL on the heartbeat mtime — reclaim regardless of kill -0, so a
  #     recycled PID or a hung holder can't wedge the lock forever. The
  #     holder touches the pidfile at step boundaries (after the pull, after
  #     setup), so a legitimately-slow run keeps itself alive. The TTL also
  #     bounds the missing/empty-pidfile states: inside the window they mean
  #     "just acquired, between mkdir and echo" and are respected.
  LOCK_TTL_MINUTES=30
  lock_is_expired() {
    _hb="$LOCK_DIR/pid"
    [ -f "$_hb" ] || _hb="$LOCK_DIR"
    [ -n "$(find "$_hb" -maxdepth 0 -mmin +$LOCK_TTL_MINUTES 2>/dev/null)" ]
  }
  # Reclaim is TOCTOU-safe via atomic mv-aside: `rm -rf` then `mkdir` lets TWO
  # contenders both judge the lock stale, both remove it, and both win the
  # mkdir (one rm can land between the other's rm and mkdir). `mv` of the lock
  # dir is atomic — exactly one contender's mv succeeds; the loser's mv fails
  # (ENOENT) and it backs off. The winner reaps the moved-aside dir at leisure.
  if ! mkdir "$LOCK_DIR" 2>/dev/null; then
    if lock_is_expired; then
      mv "$LOCK_DIR" "$LOCK_DIR.reap.$$" 2>/dev/null || { log_entry "SKIP lock_contested"; exit 0; }
      rm -rf "$LOCK_DIR.reap.$$" 2>/dev/null
      mkdir "$LOCK_DIR" 2>/dev/null || { log_entry "SKIP lock_contested"; exit 0; }
      log_entry "RECLAIMED lock_ttl_expired"
    elif [ -f "$LOCK_DIR/pid" ]; then
      LOCK_PID=$(cat "$LOCK_DIR/pid" 2>/dev/null || echo 0)
      if [ "$LOCK_PID" -gt 0 ] 2>/dev/null && ! kill -0 "$LOCK_PID" 2>/dev/null; then
        # Stale lock — mv aside atomically (see reclaim note above), re-acquire
        mv "$LOCK_DIR" "$LOCK_DIR.reap.$$" 2>/dev/null || { log_entry "SKIP lock_contested"; exit 0; }
        rm -rf "$LOCK_DIR.reap.$$" 2>/dev/null
        mkdir "$LOCK_DIR" 2>/dev/null || { log_entry "SKIP lock_contested"; exit 0; }
      else
        # Live holder — or an empty/non-numeric pidfile inside the TTL
        # window (the -gt test fails on garbage, landing here by design).
        log_entry "SKIP locked_by=$LOCK_PID"
        exit 0
      fi
    else
      # Missing pidfile inside the TTL window: just-acquired (mkdir→echo race).
      log_entry "SKIP locked_no_pid"
      exit 0
    fi
  fi

  # Write the HOLDER's PID for stale lock detection (see #2613 note above;
  # macOS ships bash 3.2 with no BASHPID — the sh child's $PPID IS this
  # subshell, so the fallback is exact there). MYPID is captured once at
  # write time so the trap below can prove ownership before removing.
  MYPID="${BASHPID:-$(sh -c 'echo $PPID')}"
  echo "$MYPID" > "$LOCK_DIR/pid" 2>/dev/null

  # In-flight heartbeat: the step-boundary touches below only fire AFTER the
  # pull / setup return, so a legitimately-slow step (cold clone, huge setup)
  # older than the TTL got reclaimed while ALIVE. This background loop
  # freshens the pidfile mtime every 5 minutes for as long as we still own
  # the lock (ownership re-checked each beat: if another updater reclaimed
  # and wrote its own pid, the loop exits instead of touching THEIR file).
  # Clean up lock on exit — ownership-checked: after a TTL reclaim by another
  # updater, $LOCK_DIR belongs to the NEW holder, and an unconditional rm -rf
  # here would delete the live holder's lock (cascading reclaims). Remove the
  # lock ONLY while $LOCK_DIR/pid still contains MYPID; always stop the
  # heartbeat, including its sleeping child, and reap it before returning.
  HB_PID=""
  cleanup_session_update() {
    # The job-table fallback covers a signal between fork and HB_PID=$!.
    # This holder has no other background jobs at that point.
    for heartbeat in ${HB_PID:-$(jobs -p)}; do
      kill "$heartbeat" 2>/dev/null
      wait "$heartbeat" 2>/dev/null
    done
    [ "$(cat "$LOCK_DIR/pid" 2>/dev/null)" = "$MYPID" ] && rm -rf "$LOCK_DIR" 2>/dev/null
  }
  trap cleanup_session_update EXIT
  trap 'exit 129' HUP
  trap 'exit 130' INT
  trap 'exit 143' TERM

  (
    cleanup_heartbeat() {
      # Only this heartbeat's own background sleep belongs to this job table.
      # Listing jobs also covers interruption before $! could be recorded.
      for sleeper in $(jobs -p); do
        kill "$sleeper" 2>/dev/null
        wait "$sleeper" 2>/dev/null
      done
    }
    trap cleanup_heartbeat EXIT
    trap 'exit 0' HUP INT TERM
    while :; do
      sleep 300 &
      wait "$!" || exit 0
      [ "$(cat "$LOCK_DIR/pid" 2>/dev/null)" = "$MYPID" ] || exit 0
      touch "$LOCK_DIR/pid" 2>/dev/null
    done
  ) &
  HB_PID=$!

  # ── Workflow leases (#3363): a live gstack session on this installation
  # (bin/gstack-lease) means neither the fast-forward nor a pending setup
  # retry runs under it, the rule bin/gstack-upgrade enforces as UPGRADE_BUSY.
  # The throttle file is not written, so the next session start tries again.
  if [ "${GSTACK_UPGRADE_FORCE:-}" != 1 ] && [ -x "$LEASE" ] \
    && BUSY=$("$LEASE" live --root "$GSTACK_DIR" --exclude-ancestry-of "$CALLER_PID" 2>/dev/null); then
    log_entry "SKIP leased $(printf '%s\n' "$BUSY" | awk 'NF { printf "%spid=%s/%s", n++ ? " " : "", $1, $2 }')"
    exit 0
  fi

  # ── Fetch, check the incoming release's Bun floor, then fast-forward (E1) ──
  OLD_HEAD=$(git -C "$GSTACK_DIR" rev-parse HEAD 2>/dev/null)
  UPDATE_URL=$(git -C "$GSTACK_DIR" remote get-url origin 2>/dev/null || echo "")
  UPDATE_HOST="${UPDATE_URL#*://}"; UPDATE_HOST="${UPDATE_HOST#*@}"; UPDATE_HOST="${UPDATE_HOST%%[/:]*}"
  # Locally-patched TRACKED files are the NORM on installs, not the
  # exception — skill-prefix mode rewrites frontmatter names and
  # `gstack-config gbrain-refresh` renders brain blocks into SKILL.md. A bare
  # --ff-only refuses over those edits, so auto-upgrade wedged permanently
  # (observed: 308 consecutive PULL_FAILED with the reason discarded, #2566);
  # bin/gstack-ff-update carries them over the release instead.
  # Capture stderr: the log must carry WHY a pull failed, never just the code.
  PULL_ERR_FILE=$(mktemp "${TMPDIR:-/tmp}/gstack-session-pull-XXXXXX" 2>/dev/null || echo "")
  GSTACK_HOME="$STATE_DIR" _receipted_git open session-update "${UPDATE_HOST:-unknown}" gstack-self-update-pull "auto_upgrade=true" \
    bash -c 'git -C "$1" fetch -q 2>"${2:-/dev/null}"' _ "$GSTACK_DIR" "$PULL_ERR_FILE"
  PULL_EXIT=$?
  # The fast-forward targets the exact revision whose requirement was read.
  # Setup runs `bun` from this PATH, so that is the binary checked; a
  # version it cannot read holds too (bun-version-unreadable, #3195).
  INCOMING="" HELD=""
  if [ "$PULL_EXIT" -eq 0 ]; then
    INCOMING=$(git -C "$GSTACK_DIR" rev-parse --verify '@{upstream}^{commit}' 2>"${PULL_ERR_FILE:-/dev/null}") || PULL_EXIT=1
  fi
  if [ "$PULL_EXIT" -eq 0 ] && [ "$INCOMING" != "$OLD_HEAD" ]; then
    HELD=$(gstack_bun_incoming_hold "$GSTACK_DIR" "$INCOMING" 2>/dev/null) || HELD=""
  fi
  if [ "$PULL_EXIT" -eq 0 ] && [ -z "$HELD" ] && [ "$INCOMING" != "$OLD_HEAD" ]; then
    HELD=$(hook_incoming_hold "$INCOMING") || HELD=""
  fi
  if [ "$PULL_EXIT" -eq 0 ] && [ -z "$HELD" ] && [ -z "$PULL_ERR_FILE" ] && [ "$INCOMING" != "$OLD_HEAD" ]; then
    # Recovering a conflicting autostash needs git's own messages; without a
    # file to keep them in, hold rather than merge blind.
    HELD="temp-file-unavailable: cannot create a temp file under ${TMPDIR:-/tmp}"
  fi
  if [ "$PULL_EXIT" -eq 0 ] && [ -z "$HELD" ]; then
    # An index that cannot be read is never "no conflicts".
    if ! _UNMERGED=$(git -C "$GSTACK_DIR" ls-files -u 2>/dev/null); then
      echo "cannot read the index of $GSTACK_DIR; nothing was moved" > "${PULL_ERR_FILE:-/dev/null}"
      PULL_EXIT=1
    elif [ -n "$_UNMERGED" ]; then
      # Someone's own merge, rebase or stash pop (or an older updater's
      # conflicting autostash) left conflicts here. A background update never
      # buries them; the banner gives the command that rescues them first.
      HELD="unmerged-files: $(printf '%s\n' "$_UNMERGED" | cut -f2- | sort -u | wc -l | tr -d ' ') unmerged file(s) in the install (first: $(printf '%s\n' "$_UNMERGED" | head -1 | cut -f2-))"
    else
      # gstack-ff-update moves the tree to the revision the checks passed:
      # conflicting edits are shelved in a rescue ref, never left as markers.
      FF_OUT=$(bash "$FF_UPDATE" "$GSTACK_DIR" "$INCOMING" 2>/dev/null)
      PULL_EXIT=$?
      case "$PULL_EXIT:$FF_OUT" in
        0:rescued\ *)
          set -- $FF_OUT
          log_entry "AUTOSTASH_CONFLICT_RECOVERED tree_reset=1 kept_stash=${4##*/} kept_ref=$4 $5"
          rescue_note "$4" "${5#unmerged=}" ;;
        0:*) ;;
        3:*) HELD=$FF_OUT PULL_EXIT=0 ;;
        75:*) log_entry "SKIP ff_busy $(ff_flatten "$FF_OUT" 200)"; rm -f "$PULL_ERR_FILE" 2>/dev/null; exit 0 ;;
        *) printf '%s\n' "${FF_OUT:-bin/gstack-ff-update exited $PULL_EXIT}" > "${PULL_ERR_FILE:-/dev/null}" ;;
      esac
    fi
  fi
  NEW_HEAD=$(git -C "$GSTACK_DIR" rev-parse HEAD 2>/dev/null)

  # Heartbeat: pull done — keep the TTL clock fresh for the setup step.
  touch "$LOCK_DIR/pid" 2>/dev/null

  # Record check time regardless of outcome
  date +%s > "$THROTTLE_FILE" 2>/dev/null

  P_STAGES="$(pending_get stages)"; P_FROM="$(pending_get from)"; P_REASON="$(pending_get reason)"
  P_FAILURES="$(pending_get failures)"; P_NEXT="$(pending_get next)"; P_PULL=""
  case "$P_FAILURES" in ''|*[!0-9]*) P_FAILURES=0 ;; esac
  case "$P_NEXT" in ''|*[!0-9]*) P_NEXT=0 ;; esac

  if [ -n "$HELD" ]; then
    HELD=$(ff_flatten "$HELD" 300)
    log_entry "HELD $HELD incoming=$INCOMING"
    P_PULL="$HELD"
    pending_save
    rm -f "$PULL_ERR_FILE" 2>/dev/null
    exit 0
  fi
  if [ "$PULL_EXIT" -ne 0 ]; then
    PULL_REASON=$(ff_flatten "$(head -c 300 "$PULL_ERR_FILE" 2>/dev/null)" 300 | tr -s ' ')
    log_entry "PULL_FAILED exit=$PULL_EXIT reason=${PULL_REASON:-unknown}"
    P_PULL="exit $PULL_EXIT: $(printf '%s' "${PULL_REASON:-no error output}" | head -c 160)"
    if [ -n "$NEW_HEAD" ] && [ "$NEW_HEAD" != "$OLD_HEAD" ]; then
      # The checkout moved but setup did not run. Owe it, or once the person
      # resolves the conflict the next check sees nothing new and never sets
      # up this revision. The unmerged-files check holds it until then.
      [ -n "$P_FROM" ] || P_FROM=$(git -C "$GSTACK_DIR" show "$OLD_HEAD:VERSION" 2>/dev/null || echo "unknown")
      P_STAGES="${P_STAGES:-setup}" P_NEXT=0 P_REASON="$P_PULL"
      log_entry "PENDING stages=$P_STAGES after a moved checkout"
    fi
    pending_save
    rm -f "$PULL_ERR_FILE" 2>/dev/null
    exit 0
  fi
  rm -f "$PULL_ERR_FILE" 2>/dev/null
  # Re-render local patches over the fresh tree (both tools are idempotent
  # no-ops when the feature is unconfigured); gstack-ff-update usually
  # carries them, but a clean re-render costs nothing and self-heals.
  _PREFIX_CFG=$("$GSTACK_DIR/bin/gstack-config" get skill_prefix 2>/dev/null || echo false)
  "$GSTACK_DIR/bin/gstack-patch-names" "$GSTACK_DIR" "$_PREFIX_CFG" >/dev/null 2>&1 || true  # best-effort: regenerable prefix rewrite
  "$GSTACK_DIR/bin/gstack-config" gbrain-refresh >/dev/null 2>&1 || true  # best-effort: regenerable gbrain blocks

  # ── Run setup when HEAD moved, or retry a pending stage after its backoff ──
  NOW=$(date +%s)
  RUN_SETUP=0
  if [ "$OLD_HEAD" != "$NEW_HEAD" ]; then
    log_entry "UPDATING old=$OLD_HEAD new=$NEW_HEAD"
    RUN_SETUP=1
    P_FAILURES=0
    [ -n "$P_FROM" ] || P_FROM=$(git -C "$GSTACK_DIR" show "$OLD_HEAD:VERSION" 2>/dev/null || echo "unknown")
  elif [ -n "$P_STAGES" ]; then
    if [ "$NOW" -ge "$P_NEXT" ]; then
      log_entry "RETRY_PENDING stages=$P_STAGES attempt=$((P_FAILURES + 1))"
      RUN_SETUP=1
    else
      log_entry "PENDING_BACKOFF stages=$P_STAGES next=$P_NEXT"
    fi
  fi

  if [ "$RUN_SETUP" -eq 1 ]; then
    FAILED_STAGE="" FAIL_REASON=""
    if command -v bun >/dev/null 2>&1; then
      SETUP_OUT=$(mktemp "${TMPDIR:-/tmp}/gstack-session-setup-XXXXXX" 2>/dev/null || echo /dev/null)
      ( cd "$GSTACK_DIR" && ./setup -q --refresh-registered ) >"$SETUP_OUT" 2>&1
      SETUP_EXIT=$?
      # Heartbeat: setup done (either way) — refresh the TTL clock.
      touch "$LOCK_DIR/pid" 2>/dev/null
      if [ "$SETUP_EXIT" -ne 0 ]; then
        _MIG="$(grep -o 'migration [^ ]* failed' "$SETUP_OUT" 2>/dev/null | head -1)"
        if [ -n "$_MIG" ]; then
          FAILED_STAGE="migrations" FAIL_REASON="$_MIG"
        else
          _LAST="$(grep -v '^[[:space:]]*$' "$SETUP_OUT" 2>/dev/null | tail -1 | head -c 160)"
          FAILED_STAGE="setup" FAIL_REASON="./setup exited $SETUP_EXIT${_LAST:+: $_LAST}"
        fi
      fi
      [ "$SETUP_OUT" = /dev/null ] || rm -f "$SETUP_OUT"
    else
      FAILED_STAGE="setup" FAIL_REASON="bun not found on PATH"
      log_entry "SETUP_SKIPPED bun_missing"
    fi

    if [ -z "$FAILED_STAGE" ]; then
      # Every stage succeeded: now the next skill preamble may say "just upgraded".
      echo "${P_FROM:-unknown}" > "$STATE_DIR/just-upgraded-from" 2>/dev/null
      rm -f "$STATE_DIR/last-update-check" 2>/dev/null
      rm -f "$STATE_DIR/update-snoozed" 2>/dev/null
      log_entry "UPDATED from=${P_FROM:-unknown} to=$(cat "$GSTACK_DIR/VERSION" 2>/dev/null || echo unknown)"
      P_STAGES="" P_FROM="" P_FAILURES=0 P_NEXT=0 P_REASON=""
      pending_save
    else
      P_FAILURES=$((P_FAILURES + 1))
      case "$P_FAILURES" in 1) _WAIT=$THROTTLE_SECONDS ;; 2) _WAIT=21600 ;; *) _WAIT=86400 ;; esac
      P_STAGES="$FAILED_STAGE" P_NEXT=$((NOW + _WAIT)) P_REASON="$FAIL_REASON"
      pending_save
      [ "$FAILED_STAGE" = setup ] && [ "$FAIL_REASON" != "bun not found on PATH" ] && log_entry "SETUP_FAILED reason=$FAIL_REASON"
      [ "$FAILED_STAGE" = migrations ] && log_entry "MIGRATIONS_FAILED reason=$FAIL_REASON"
      log_entry "PENDING stages=$FAILED_STAGE attempt=$P_FAILURES next_retry_in=${_WAIT}s"
    fi
  else
    pending_save
    [ -n "$P_STAGES" ] || log_entry "UP_TO_DATE head=$OLD_HEAD"
  fi
# The detached subshell must own its stdio: it inherits the session hook's
# pipes, and once the hook exits and the caller closes them, any child that
# writes (git pull's autostash notice, setup output) dies of SIGPIPE —
# observed as PULL_FAILED exit=141 with an empty stderr capture. All
# observability goes through LOG_FILE.
) >/dev/null 2>&1 &

exit 0