Retesting a finding creates an independent conversation branch that
snapshots the source history and model trace, so verification can run
multi-turn without writing to the original session.
- POST /api/vulnerabilities/:id/retest creates the branch and persists the
prompt, so a lost response, navigation or refresh can resume it
- new update_vulnerability_status tool closes the loop; a retest branch may
only read and update its own finding
- {{vulnerability_id}}, {{conversation_id}} and {{source_conversation_id}}
resolve on send, in the first turn and in follow-ups
- evidence appends to a read-only vulnerabilities.retest_log column instead
of retest_notes: that field is operator-authored and the edit form
rewrites it wholesale, so a routine edit used to erase the retest trail
- the retest prompt is prefilled with the operator's retest_notes, which
already states how to verify the fix
- copied messages are re-bound as time.Time. Scanning a DATETIME column into
a string yields RFC3339Nano while AddMessage writes the driver's
space-separated format, and messages sort on the raw created_at text, so a
branch rendered its new turn above the inherited history
The review found two failure paths that reported success for work the engine had
not done.
Rollback: it refused only when *non-protected* source files were modified, and
then ran `git reset --hard` to the previous commit - which discards every local
change to tracked files, not just the update's. Edits to roles/skills/tools (the
update itself keeps those via its own stash) and edits made after the update
were silently wiped, while Result said nothing: deployment.md's promise that
"work done afterwards is not swept away" did not hold. Rollback now copies every
protected file that differs right now into `.update-backup/rollback_<ts>/`
before the reset, sets the copies back after it, re-applies hand deletions, and
names what it kept in Result.KeptContent like an update does.
Retry: Apply merges and writes the state file before it builds, so a failed (or
toolchain-less) build leaves HEAD on the new commit with the old binary still in
place. The retry then took the `!snap.UpdateAvailable` no-op branch, aligned the
version and returned err=nil - the job was recorded as succeeded, the page said
"update finished", the CLI printed that source and binary were in place, and the
old executable kept running. The tree now carries a `.update-build-pending`
marker, written the moment the merge lands (and when an adoption commits to its
work tree) and cleared only after the new binary is in place. The no-op branch
reads it: with a toolchain it compiles and reports the build (commits=0,
binaryBuilt=true); without one it keeps refusing exactly like the first attempt,
so "install go and click again" is now a real instruction. The console stops
treating "nothing to pull" as "nothing to do" (the retry button stays live, the
confirm dialog and the done toast say the build is what will happen), and the
CLI's printResult no longer swallows the build-only result.
Both paths are covered by regression tests that fail on the pre-fix tree: two
rollback scenarios driven through real git (edit before and after the update, a
hand deletion), and four retry scenarios driven through a scripted go on PATH
(failed build, state-write failure, an adoption's failed build retried by the
next update, and no toolchain then toolchain).
Reported from the live installation: after opening 系统设置 → 一键更新 (the
automatic check runs) the 保存更新源 button silently stopped working — a click
produced no request at all and the server log never saw a POST.
Root cause: the busy flag is a render input — it stamps `disabled` +
`data-state-disabled` on the action buttons — but the console only ever
re-rendered *while* busy. checkForUpdates (including the automatic one) renders
on entry and again when the response lands, and withUpdateBusy never rendered
once the flag cleared, so the last render left the source-save button disabled
for good. The carrier makes it permanent: data-state-disabled tells the
platform's permission gate not to re-enable the element either. Measured in a
browser after the auto-check: the DOM carried `disabled
data-state-disabled="true"` while updateBusy was already false.
Fix: withUpdateBusy now renders symmetrically — once on entry (the form visibly
locks while an action is in flight) and once after the flag clears (usable
again, button re-enabled) — skipping the exit render only when the restart
watchdog owns the view. The transient error banner stops being an injected div
and becomes state (updateActionError) rendered by renderUpdateConsole, so the
exit render cannot wipe it; it clears when a new action starts or the console is
re-entered.
Tests: the regression follows the operator's exact chain — deferred automatic
check → the form must be enabled again → clear the address → save must reach the
server — plus a second-save check; the first fails on the old code on the
disabled markup. Verified end to end in a real browser against a scratch
installation: the render trace reads entry(busy)→response(busy)→exit(idle), and
both saves (set and clear) hit the API and land in config.yaml.
The update source used to be three things - a remote name or an address, plus an
optional branch - and unset it followed whatever this directory's remotes and
upstream happened to say. That asked people to understand git topology before
they could update, and the person it was built for could not tell what "follow
the remote this tree tracks" meant. It is now one field: config.yaml update.repo,
an address, empty meaning the official repository
(https://github.com/AIPentest/CyberStrikeAI.git). Point it at a mirror (GitHub is
hard to reach in some places) or at your own fork and that is the whole
configuration.
The branch nothing is any more: an update follows the source repository's own
default branch, resolved from the source itself (ls-remote --symref HEAD), so a
fork whose default is not "main" still works and nobody has to name a branch.
Remote names, the mine/origin/upstream ranking, @{upstream} tracking and the
adopt flow's branch argument are all gone with it.
The console page loses two input fields: the source section is one address, a
hint that empty means the official repository, and a save button; clearing the
address is the way back to the default. The install facts drop the remote name,
the check section shows the source's default branch once the network answer
arrives, and the adopt entry no longer requires saving an address first - the
official default makes connecting a tarball install a zero-configuration action.
The CLI now reads the same update.repo field the page saves (LoadUpdateRepo reads
just that field, without validating the rest of the file - a broken unrelated
section must not block the path that fixes the tree), so the keyboard and the
button cannot update from different repositories. -check-update prints the source
it is about to use.
Tests: the source suite now pins the default (official), the single-address save
(including the empty-string reset), and that the followed branch comes from the
source's own default branch rather than a hardcoded "main"; the console suite
posts the one field and renders the default hint; docs, config.example.yaml and
upgrade.sh describe the one-field story.
The console now knows what it is running: the status endpoint compares the binary
identity captured at startup (size + nanosecond mtime) with the file on disk, so
an update, a rollback or a CLI run that swapped the binary without a restart is
reported as needsRestart (with the build time) - a state that used to live only in
one job's result and vanished with the process. That state grows a persistent
banner and POST /api/system/update/restart (409 when there is nothing to activate
or a job owns the tree, 400 without a hook), so a forgotten tick is one click
instead of a shell login.
The restart tick defaults to on exactly where it is safe: launchd/systemd leave
markers in the environment (XPC_SERVICE_NAME, INVOCATION_ID/JOURNAL_STREAM) and
the box follows them; an operator's own choice is never second-guessed afterwards.
While the process is down the console becomes a recovery view that probes the
status endpoint every 2 seconds: 200 means the old process still answers, a dead
socket means it is on its way out, and a 401 - only a new process can fail to know
the session - reloads the page back to #system-update. A job poll that dies during
a requested restart is the restart in flight, not a failure to toast.
Also fixed: updateT now asks i18next not to escape interpolated values, because
the console escapes at render time - the apply confirm dialog has been showing
branch names with / ever since they contained a slash, and the new banner
showed dates the same way.
Tests: 7 new console contract tests (36 total: banner, tick default, restart
confirm/refusal, watchdog 200-vs-401, timeout copy, the in-flight poll death) plus
handler tests for the stamp and the endpoint, all mutation-probed; docs describe
the pending-restart state and the self-recovery.
The update console stops being a page of its own and becomes the last section
of 系统设置 (data-section="update", gated by update:read): the sidebar entry
and page-system-update are gone, the console markup lives in
settings-section-update, and the settings menu is where an operator now finds
it. #system-update keeps working as an alias - both hash parsers normalize it
to settings + the update section - so existing deep links and docs keep landing.
Polling follows the new home: leaving the settings page (router) or switching
to another section (settings.js) stops it, selecting the section loads the
console, and returning to the settings page with the section still selected
re-reads the install tree and re-arms the poller (a frozen progress read is
the "nothing is happening" picture an operator must never be shown).
The guard suite follows the move: the old nav/page assertions become "must not
exist", the new ones pin the section, the alias, the poller handoff and the
retired nav.systemUpdate key (settings.nav.update replaces it in zh/EN/RU).
README and both developer/deployment guides say 系统设置 → 一键更新.
The console page grows an update-source section: what is in effect and where it
comes from (config.yaml or the tree's own tracking), an edit form for the three
fields, and - for a directory that is not a git installation - the adopt entry.
Adopt is preview-first: the plan lists what would be replaced and what would be
kept, the confirm dialog carries the counts, and the restart tick is the same one
an update uses. A refused save shows the server's own sentence (a remote name and
an address together, an ext:: address) instead of a generic failure, and the typed
values survive the failed save and the polling redraws.
zh/EN/RU dictionaries carry the 27 new keys; the console page's contract tests
grow to 29 (source rendering and save body, the refusal path, adopt gating by
installation kind, preview-then-confirm); docs/README describe choosing a source
and connecting an unpacked installation.
An operator running a fork has no honest way to upgrade: upgrade.sh downloads the
Release tarball of one hard-coded third-party repository and rsyncs it over the
tree, so "upgrade" means "overwrite yourself with somebody else's code", and the
safe alternative is to pull by hand and remember the build command.
internal/update drives the remote the directory already tracks: fetch, fast-forward,
go build into .update-staging, atomic rename of the binary (the previous one kept as
cyberstrike-ai.prev), and a .update-state.json so a rollback has a target that is
not guessed at. Refusals are the point - local source edits and a diverged branch
stop with the file names and commit counts in the error rather than being reset to
match, and operator-owned content (roles/skills/tools/agents/data/config.yaml) is put
aside before the merge and restored over it, with what was kept listed in keptContent
instead of quietly dropped.
Consumers: GET/POST /api/system/update* behind update:read / update:apply (mutations
are process-global, so they need a global-scope session); a console page at
#system-update with an apply button that names why it is blocked, a job polled from
the server and a rollback control; the same three actions as -check-update / -update
/ -update-rollback on the binary; OpenAPI entries for all five endpoints. Permission
gating no longer re-enables a control a page disabled for a reason of its own
(data-state-disabled), which every state-disabled, permission-gated button in the
console was subject to. upgrade.sh becomes a thin shell over the same implementation
and only falls back to the tarball path for installs that are not git work trees.
Docs and the zh/EN/RU dictionaries are updated. The package runs 13 tests against
real temporary git repositories; the HTTP layer, RBAC and the console page each
carry their own contract tests.
Add a ru-RU language pack and a Русский entry in the language switcher so the console can be used in Russian. Dates follow the selected locale. Strings that are not translated yet fall back to English.
Runtime artifacts (agent workspaces, tool-output spill, C2 payloads, chat
uploads, workflow checkpoints, diagnostic logs) previously accumulated
without bound: most were only removed when a conversation or project was
deleted, and tmp/c2 plus workflow checkpoints were never removed at all.
Add a storage cleaner with named per-category tasks (Gitea-style), a
settings page tab, and a background sweep that is off by default so
upgrading never deletes existing data.
Safety properties, since mis-deleting live task data costs far more than
the disk saved:
- dry-run is the default; a real cleanup requires dry_run=false together
with confirm=true at the API layer, not just a frontend dialog
- sessions active within active_grace_hours are always skipped, and a
failed activity lookup skips conservatively (fail closed)
- directories whose conversation/project no longer exists are reclaimed
as orphans after orphan_grace_days
- scanners never follow symlinks and every candidate path is confined to
its category root; deletion renames to a .tmp-for-deletion marker first
so a crash leaves recoverable residue instead of a half-deleted dir
- storage:* permissions are admin-only; without the grantSystemRolePermissions
skip the default branch would have given operators an irreversible
file-deletion right
Also fix two confirmed leaks: DeleteConversation left chat_uploads files
on disk (their rows already vanished via ON DELETE CASCADE), and workflow
checkpoints had no deletion path at all.
Co-authored-by: Parallels <parallels@kali-linux-2025-2.localdomain>
Let audit_agent approve or reject with one System One call instead of chat JSON, while keeping the OpenAI-compatible backend as an option.
Co-authored-by: Cursor <cursoragent@cursor.com>
* fix(web): stabilize active task ordering
* fix(chat): preserve navigation during conversation startup
* fix(tasks): guarantee hard cancellation
* fix(chat): bind navigation and hard stop targets
* fix(chat): prevent replay from reclaiming navigation
Sycun