Minimal Desktop
Niellune
@@ -50,7 +50,7 @@ Download and install [Raspberry Pi Imager](https://www.raspberrypi.com/software/
|
||||
|
||||
|
||||
|
||||
Choose **Raspberry Pi OS (other)** and select **Raspberry Pi OS Lite (32-bit)**. This provides a minimal Debian-based system with lower memory footprint.
|
||||
Choose **Raspberry Pi OS (other)** and select **Raspberry Pi OS Lite (64-bit)**. This provides a minimal Debian-based system with lower memory footprint.
|
||||
|
||||
|
||||
|
||||
@@ -68,8 +68,6 @@ Skip customisation step to set up accounts and locales on first boot.
|
||||
|
||||
Review the configuration and write the image to the SD card. Wait for the process to finish.
|
||||
|
||||
|
||||
|
||||
# 2 Partitioning
|
||||
> [!TIP]
|
||||
>This optional step prepares the system for an overlay filesystem, allowing the core system to run in read-only mode while keeping the user directory writable. It also creates a Linux swap partition. If you don’t need an overlay setup, you can skip this and boot the Pi normally. The SD card partitions will be expanded automatically on first boot.
|
||||
|
||||
|
Before Width: | Height: | Size: 43 KiB After Width: | Height: | Size: 206 KiB |
|
Before Width: | Height: | Size: 97 KiB After Width: | Height: | Size: 253 KiB |
|
Before Width: | Height: | Size: 49 KiB After Width: | Height: | Size: 147 KiB |
|
Before Width: | Height: | Size: 57 KiB After Width: | Height: | Size: 165 KiB |
|
Before Width: | Height: | Size: 43 KiB |