Add missing selfDeleteExe() call and supportedSelfDelete check that were
present in the original initUninstallCmd function. This ensures the
uninstall command properly handles self-deletion of the binary when
cleanup is enabled.
The original logic included:
- selfDeleteExe() call for self-deletion
- supportedSelfDelete check for platform-specific behavior
- Proper error handling and logging
This completes the porting of all functionality from the original
initUninstallCmd to the new ServiceCommand.Uninstall method.
Rename service_manager.go to commands_service_manager.go to follow the
established naming pattern with other command files.
Remove the unused CommandRunner interface from commands.go since it's not
being used anywhere in the codebase. Clean up unused imports.
This improves consistency in file naming and removes dead code.
Create commands_run.go following the same modular pattern as other
command files. Move initRunCmd logic to InitRunCmd function with
consistent naming and complete functionality preservation.
Update cli.go to use InitRunCmd() instead of initRunCmd() and clean
up commands.go by removing the old function and unused imports.
This completes the modular refactoring pattern where each command type
has its own dedicated file with focused responsibility.
Remove all unused service command functions (initStartCmd, initStopCmd,
initRestartCmd, initReloadCmd, initStatusCmd, initUninstallCmd,
initInterfacesCmd, initClientsCmd, initUpgradeCmd, initServicesCmd)
from commands.go since they have been replaced by modular implementations
in dedicated files. Keep only essential functions: CommandRunner interface,
ServiceManager struct, NewServiceManager function, Status method,
initRunCmd function, and filterEmptyStrings function.
Update cli.go to use InitClientsCmd() and InitUpgradeCmd() instead of
the old init functions. Clean up unused imports and simplify
filterEmptyStrings implementation.
This reduces commands.go from 1202 lines to 103 lines (91% reduction)
and eliminates code duplication while improving maintainability.
Replace individual service command initialization with unified InitServiceCmd()
that creates a complete service command hierarchy. Port all original logic
from initStartCmd, initStopCmd, initRestartCmd, initReloadCmd, initStatusCmd,
and initUninstallCmd into ServiceCommand methods with proper dependency injection.
Key changes:
- Port complete Start logic including config validation, service installation,
DNS management, and self-check functionality
- Port complete Stop logic with deactivation pin validation and DNS cleanup
- Port complete Restart logic with config validation and DNS restoration
- Port complete Reload logic with HTTP status handling and restart fallback
- Port complete Status logic with proper exit codes
- Port complete Uninstall logic with cleanup file removal
- Add all necessary flags to service commands (iface, pin, etc.)
- Use InitInterfacesCmd() for interfaces subcommand
- Simplify cli.go by replacing multiple init calls with single InitServiceCmd()
This refactoring eliminates code duplication, improves maintainability, and
ensures all service commands have their complete original functionality.
Remove the old initLogCmd function from commands.go and update cli.go
to use the new InitLogCmd function from commands_log.go. Complete
the log command refactoring by adding the missing InitLogCmd function
with proper command structure and error handling.
Port all special logic from original alias commands:
- startCmdAlias: custom Args validation, startOnly logic, iface handling
- stopCmdAlias: iface flag handling and argument passing
- restartCmdAlias: simple delegation to restartCmd.RunE
- reloadCmdAlias: simple delegation to reloadCmd.RunE
- statusCmdAlias: simple delegation to statusCmd.RunE
- uninstallCmdAlias: iface flag handling and argument passing
All aliases now have exact same behavior as original implementation
including proper flag inheritance and argument handling.
Create separate file for interfaces command handling to improve code organization.
Add InterfacesCommand struct with ListInterfaces method that handles the
logic to list current system interfaces.
Create separate file for clients command handling to improve code organization.
Add ClientsCommand struct with ListClients method that includes all original logic:
service status checks, HTTP requests, source mapping, metrics handling, and table
formatting. Includes InitClientsCmd function that creates proper command hierarchy
with clients parent command and list sub-command.
Create separate file for upgrade command handling to improve code organization.
Add UpgradeCommand struct with Upgrade method that includes all original logic:
channel management, service restart, rollback handling, and version verification.
Includes InitUpgradeCmd function with proper argument validation and privilege checks.
Create separate file for service command handling to improve code organization.
Add ServiceCommand struct with Install, Uninstall, Start, Stop, and Status
methods to handle service operations with proper error handling and dependency
injection.
Create separate file for log command handling to improve code organization.
Add LogCommand struct with SendLogs and ViewLogs methods to handle
log-related operations with proper error handling and dependency injection.
- Add NoticeLevel constant using zapcore.WarnLevel value (1)
- Implement custom level encoders (noticeLevelEncoder, noticeColorLevelEncoder)
- Update Notice() method to use custom level
- Add "notice" case to log level parsing in main.go
- Update encoder configurations to handle NOTICE level properly
- Add comprehensive test (TestNoticeLevel) to verify behavior
The NOTICE level provides visual distinction from INFO and ERROR levels,
with cyan color in development and proper level filtering. When log level
is set to NOTICE, it shows NOTICE and above (WARN, ERROR) while filtering
out DEBUG and INFO messages.
Note: NOTICE and WARN share the same numeric value (1) due to zap's
integer-based level system, so both display as "NOTICE" in logs for
visual consistency.
Usage:
- logger.Notice().Msg("message")
- log_level = "notice" in config
- Supports structured logging with fields
- Add condition to skip port 53 attempts when using zero IP address
- Improve error logging by using structured error field instead of string formatting
- Remove redundant error information from log message format
The changes prevent unnecessary port 53 binding attempts when using zero IP
addresses and improve log readability by using zap's structured error fields.
Replace github.com/rs/zerolog with go.uber.org/zap throughout the codebase
to improve performance and provide better structured logging capabilities.
Key changes:
- Replace zerolog imports with zap and zapcore
- Implement custom Logger wrapper in log.go to maintain zerolog-like API
- Add LogEvent struct with chained methods (Str, Int, Err, Bool, etc.)
- Update all logging calls to use the new zap-based wrapper
- Replace JSON encoders with Console encoders for better readability
Benefits:
- Better performance with zap's optimized logging
- Consistent structured logging across all components
- Maintained zerolog-like API for easy migration
- Proper field context preservation for debugging
- Multi-core logging architecture for better output control
All tests pass and build succeeds.
- Add explicit foundDefaultRoute boolean variable to track default route discovery
- Initialize foundDefaultRoute to false and set to true only in success case
- Replace tautological condition `err == nil` with meaningful `foundDefaultRoute` check
- Fixes "tautological condition: nil == nil" linter error
The error occurred because err was being reused from net.Interfaces() call,
making the condition always true. Now we explicitly track whether a default
route was successfully found.
- Split handleRecovery into focused helper methods for better maintainability:
* shouldStartRecovery: handles recovery cancellation logic
* createRecoveryContext: manages recovery context and cleanup
* prepareForRecovery: removes DNS settings and initializes OS resolver
* completeRecovery: resets upstream state and reapplies DNS settings
* reinitializeOSResolver: reinitializes OS resolver with proper logging
* Update handleRecovery documentation to reflect new orchestration role
- Improve tests:
* Add newTestProg helper to reduce test setup duplication
* Write comprehensive table-driven tests for all recovery methods
This refactoring improves code maintainability, testability, and reduces
complexity while maintaining the same recovery behavior. Each method now
has a single responsibility and can be tested independently.
- Add filterEmptyStrings utility function for consistent string filtering
- Replace inline slices.DeleteFunc calls with filterEmptyStrings
- Apply filtering to osArgs in addition to command args
- Improves code readability and reduces duplication
- Uses slices.DeleteFunc internally for efficient filtering
- Move version checking logic to shouldUpgrade for testability
- Move upgrade command execution to performUpgrade
- selfUpgradeCheck now composes these two for clarity
- Update and expand tests: focus on logic, not side effects
- Improves maintainability, testability, and separation of concerns
Split the long proxy method into several smaller methods to improve maintainability
and testability. Each new method has a single responsibility:
- initializeUpstreams: handles upstream configuration setup
- tryCache: manages cache lookup logic
- tryUpstreams: coordinates upstream query attempts
- processUpstream: handles individual upstream query processing
- handleAllUpstreamsFailure: manages failure scenarios
- checkCache: performs cache checks and retrieval
- serveStaleResponse: handles stale cache responses
- shouldContinueWithNextUpstream: determines if failover is needed
- prepareSuccessResponse: formats successful responses
This refactoring:
- Reduces cognitive complexity
- Improves code testability
- Makes the DNS proxy logic flow clearer
- Isolates error handling and edge cases
- Maintains existing functionality
No behavioral changes were made.
Break down the large DNS handling function into smaller, focused functions
with clear responsibilities:
- Extract handleDNSQuery from serveDNS handler function
- Create dedicated startListeners function for listener management
- Add standardQueryRequest struct to encapsulate query parameters
- Split special domain handling into separate function
- Add descriptive comments for each new function
- Improve variable names for better clarity (e.g., startTime vs t)
This refactoring improves code maintainability and readability without
changing the core DNS proxy functionality.
Move getDNS type definition from dns.go to os_linux.go where it is used.
Remove the now-empty dns.go file. This change improves code organization
by keeping platform-specific types with their implementations.
Add context parameter to validInterfacesMap for better error handling and
logging. Move Windows-specific network adapter validation logic to the
ctrld package. Key changes include:
- Add context parameter to validInterfacesMap across all platforms
- Move Windows validInterfaces to ctrld.ValidInterfaces
- Improve error handling for virtual interface detection on Linux
- Update all callers to pass appropriate context
This change improves error reporting and makes the interface validation
code more maintainable across different platforms.
Improve documentation for Test_prog_parseResolvConfNameservers to clarify that
the old implementation was removed as part of code deduplication effort. The code
for handling resolv.conf was unified into the resolvconffile package to provide
a consistent interface across the codebase.
This change provides better context for future developers about why the
refactoring was done and what benefits it brings.
Make nameserver resolution functions more consistent and accessible:
- Rename currentNameserversFromResolvconf to CurrentNameserversFromResolvconf
- Move function to public API for better reusability
- Update all internal references to use the new public API
- Add comprehensive godoc comments for nameserver functions
- Improve code organization by centralizing DNS resolution logic
This change makes the nameserver resolution functionality more maintainable
and easier to use across different parts of the codebase.
By adding a logger field to "prog" struct, and use this field inside its
method instead of always accessing global mainLog variable. This at
least ensure more consistent usage of the logger during ctrld prog
runtime, and also help refactoring the code more easily in the future
(like replacing the logger library).
So setting up logging for ctrld binary and ctrld packages could be done
more easily, decouple the required setup for interactive vs daemon
running.
This is the first step toward replacing rs/zerolog libary with a
different logging library.
This commit reverts changes from v1.4.5 to v1.4.7, to prepare for v2.0.0
branch codes.
Changes includes in these releases have been included in v2.0.0 branch
already.
Details:
Revert "feat: add --rfc1918 flag for explicit LAN client support"
This reverts commit 0e3f764299.
Revert "Upgrade quic-go to v0.54.0"
This reverts commit e52402eb0c.
Revert "docs: add known issues documentation for Darwin 15.5 upgrade issue"
This reverts commit 2133f31854.
Revert "start mobile library with provision id and custom hostname."
This reverts commit a198a5cd65.
Revert "Add OPNsense new lease file"
This reverts commit 7af29cfbc0.
Revert ".github/workflows: bump go version to 1.24.x"
This reverts commit ce1a165348.
Revert "fix: ensure upstream health checks can handle large DNS responses"
This reverts commit fd48e6d795.
Revert "refactor(prog): move network monitoring outside listener loop"
This reverts commit d71d1341b6.
Revert "fix: correct Windows API constants to fix domain join detection"
This reverts commit 21855df4af.
Revert "refactor: move network monitoring to separate goroutine"
This reverts commit 66e2d3a40a.
Revert "refactor: extract empty string filtering to reusable function"
This reverts commit 36a7423634.
Revert "cmd/cli: ignore empty positional argument for start command"
This reverts commit e616091249.
Revert "Avoiding Windows runners file locking issue"
This reverts commit 0948161529.
Revert "refactor: split selfUpgradeCheck into version check and upgrade execution"
This reverts commit ce29b5d217.
Revert "internal/router: support Ubios 4.3+"
This reverts commit de24fa293e.
Revert "internal/router: support Merlin Guest Network Pro VLAN"
This reverts commit 6663925c4d.
Make RFC1918 listener spawning opt-in via --rfc1918 flag instead of automatic behavior.
This allows users to explicitly control when ctrld listens on private network addresses
to receive DNS queries from LAN clients, improving security and configurability.
Refactor network interface detection to better distinguish between physical and virtual
interfaces, ensuring only real hardware interfaces are used for RFC1918 address binding.
- Add UpstreamConfig.VerifyMsg() method with proper EDNS0 support
- Replace hardcoded DNS messages in health checks with standardized verification method
- Set EDNS0 buffer size to 4096 bytes to handle large DNS responses
- Add test case for legacy resolver with extensive extra sections
Move the network monitoring goroutine initialization outside the listener
loop to prevent it from being started multiple times. Previously, the
network monitoring was started once per listener during first run, which
was unnecessary and could lead to multiple monitoring instances.
The change ensures network monitoring is started only once per program
execution cycle, improving efficiency and preventing potential resource
waste from duplicate monitoring goroutines.
- Extract network monitoring goroutine from listener loop
- Start network monitoring once per run cycle instead of per listener
- Maintain same functionality while improving resource usage
- Move network monitoring initialization out of serveDNS() function
- Start network monitoring in a separate goroutine during program startup
- Remove context parameter from monitorNetworkChanges() as it's not used
- Simplify serveDNS() function signature by removing unused context parameter
- Ensure network monitoring starts only once during initial run, not on reload
This change improves separation of concerns by isolating network monitoring
from DNS serving logic, and prevents potential issues with multiple
monitoring goroutines if starting multiple listeners.
- Add filterEmptyStrings utility function for consistent string filtering
- Replace inline slices.DeleteFunc calls with filterEmptyStrings
- Apply filtering to osArgs in addition to command args
- Improves code readability and reduces duplication
- Uses slices.DeleteFunc internally for efficient filtering
- Move version checking logic to shouldUpgrade for testability
- Move upgrade command execution to performUpgrade
- selfUpgradeCheck now composes these two for clarity
- Update and expand tests: focus on logic, not side effects
- Improves maintainability, testability, and separation of concerns
Fixes search domains not being preserved when the resolv.conf file is
reverted to its previous state. This ensures that important domain
search configuration is maintained during DNS configuration changes.
The search domains handling was missing in setResolvConf function,
which is responsible for restoring DNS settings.
For cached or singleflight messages, the edns0 cookie is currently
shared among all of them, causing mismatch cookie warning from clients.
The ctrld proxy should re-set client cookies for each request
separately, even though they use the same shared answer.
