ctrld/docs/firewall-mode.md

Firewall Mode

Firewall mode makes DNS policy unbypassable by blocking outbound connections to any IP that wasn't resolved by ctrld. This closes the "DNS gap" - where apps use hardcoded IPs, direct-IP fallbacks, or alternative DNS resolvers to bypass DNS-based filtering.

How It Works

1. DNS responses feed the allowlist: Every successful A/AAAA record resolved by ctrld is added to an in-memory allowlist with TTL-based expiry.

2. Outbound connections are checked: Before any outbound TCP/UDP connection, the destination IP is checked against the allowlist. If it wasn't resolved by ctrld, the connection is blocked.

3. Permanent entries are always allowed: Loopback, RFC1918 private ranges, link-local, CGNAT, multicast, ctrld's own listener, and upstream resolver IPs are always allowed.

Configuration

TOML Config

[service]
  firewall_mode = "on"   # "off" (default) or "on"
  intercept_mode = "hard" # Required on desktop for enforcement

CLI Flag

ctrld start --firewall-mode on --intercept-mode hard

Remote API

Firewall mode can be toggled remotely via the ControlD API's custom_config field, which is polled by apiConfigReload().

Platform-Specific Enforcement

macOS (pf)

When both firewall mode and intercept mode are active, ctrld extends the pf anchor with a <ctrld_allowed> table:

• Default: block all outbound traffic
• Pass: traffic to IPs in the <ctrld_allowed> table
• Pass: traffic to loopback and link-local
• Pass: existing DNS intercept rules

The table is dynamically updated as DNS responses arrive. Updates are batched (200ms accumulation window) to avoid excessive pfctl calls.

Windows (WFP)

When both firewall mode and hard intercept mode are active, ctrld extends the WFP sublayer with dynamic permit filters:

• Base: block all outbound traffic (low-weight filter)
• Dynamic: permit filters for each IP in the allowlist
• Static: permits for loopback, RFC1918, ctrld listener

Permit filters are added/removed dynamically as the allowlist changes.

Linux and Unsupported Platforms

Kernel enforcement is not implemented yet. On unsupported platforms, firewall_mode = "on" currently fails open: ctrld still records allowlist stats, but it does not block outbound traffic. A warning is logged at startup so this is visible. Future work: iptables/nftables rules or eBPF, and possibly a strict mode that fails closed when platform enforcement is unavailable.

Permanently Allowed IPs

These IPs are always allowed regardless of DNS resolution:

Range	Reason
127.0.0.0/8, ::1	Loopback - local services
10.0.0.0/8	RFC1918 - LAN, printers, NAS
172.16.0.0/12	RFC1918 - LAN
192.168.0.0/16	RFC1918 - LAN
169.254.0.0/16, fe80::/10	Link-local - DHCP, mDNS
100.64.0.0/10	CGNAT - Tailscale, carrier NAT
224.0.0.0/4, ff00::/8	Multicast - mDNS, SSDP
ctrld listener IPs	Self - DNS proxy must be reachable
Upstream resolver IPs	DoH/DoT/DoQ endpoints

Live Profile Updates

When a ControlD profile changes (domain goes from allowed → blocked or vice versa):

1. ctrld's apiConfigReload() detects the change
2. The entire allowlist is flushed
3. Subsequent DNS queries repopulate the allowlist under the new policy
4. Brief connectivity interruption (~seconds) while DNS cache repopulates

This is the "flush and repopulate" strategy - simple and correct, with a small tradeoff of a brief connectivity blip on config changes.

Network State Changes

When the device changes networks (WiFi → cellular, between WiFi networks, etc.):

1. monitorNetworkChanges() detects the transition
2. The allowlist is flushed (old IPs may not be routable on new network)
3. DNS cache is also flushed (existing behavior)
4. Both repopulate naturally from new DNS queries

Edge Cases

CDN IP Rotation

A domain may resolve to different IPs over time. Each resolved IP is added independently with its own TTL. Multiple IPs can coexist for the same domain.

CNAME Chains

For foo.com → CNAME → bar.cdn.com → A record, the final A/AAAA IPs are allowlisted and associated with the original query domain (foo.com).

Short TTLs

Some CDNs use 30-second TTLs. The allowlist enforces a minimum TTL of 30 seconds to prevent excessive churn. The background reaper runs every 30 seconds.

App Startup Race

Apps may attempt connections before their first DNS query reaches ctrld. This is a known limitation. A "learning mode" grace period at startup is a future enhancement.

Cached Responses

When ctrld serves a response from its DNS cache, the allowlist entries are refreshed. This prevents the case where the DNS cache outlives the allowlist TTL.

Long-Lived Connections and Direct-IP Retries

Firewall mode learns allowed destinations from DNS responses. If an app keeps a long-lived connection open across a firewall/profile refresh, or retries directly to a previously resolved IP without issuing another DNS query, the reconnect can remain blocked until the app performs DNS resolution again. This is an accepted v1 tradeoff and should be called out in release notes and compatibility testing for common apps.

VM / Container Workloads (macOS)

By default a VM or container resolves DNS through a path the host ctrld does not observe (the hypervisor's own resolver on the guest bridge, or a resolver the guest is configured to use). The guest-resolved public IP therefore never enters <ctrld_allowed>, and the guest's forwarded/NATed egress to that IP is dropped by the blanket block - DNS "works" inside the guest but TCP/443 fails. (Tracked as issue #569.)

Exempting the whole bridge interface would turn the guest into a policy bypass, so it is intentionally not done. Instead ctrld makes those guests first-class Firewall Mode clients by forcing their DNS through itself. The trusted source subnets are the union of:

1. Auto-detected VM networks (default, no config). At pf-anchor build time an interface is trusted only when it is up, carries an RFC1918 IPv4 network, and its VM ownership can be proven one of two ways:

   • its own name is vendor-specific - vnic (Parallels), vboxnet (VirtualBox host-only), vmnet (legacy kext-based VMware Fusion on Intel);
   • it is a bridge* whose member list contains a vendor VM interface (typically vmenet*). This is the case for every vmnet.framework stack - UTM and other Virtualization.framework guests, Docker Desktop, Multipass, and Fusion 12.1+ NAT - where the RFC1918 gateway address sits on bridge10x and the vendor-named vmenet* interface is an address-less member of it. Matching on interface name alone never sees those stacks.

   Physical uplinks (en*), loopback, VPN tunnels (utun*), public ranges, and IPv6 never qualify. Each auto-trusted subnet is logged at debug level (Firewall: auto-detected VM/container network for forwarded DNS, with the reason field naming the proof), and its pf rules are scoped to the interface it was detected on (on <iface>), so an unrelated interface carrying the same private range is never affected.

   A bridge* name is still not proof of anything: macOS uses that namespace for Thunderbolt and aggregated links too (ctrld's own tunnel-change code treats bridge0 as physical). Membership is what distinguishes them - a Thunderbolt bridge has en* members and is never trusted, however private its address.

2. Configured subnets (opt-in). Needed for any stack whose ownership auto-detection cannot prove - a VM network on a plain interface with no vendor name, a bridge with no vendor member, or a deliberately non-RFC1918 range:

   [service]
     firewall_mode = "on"
     intercept_mode = "hard"
     # Only needed when auto-detection cannot prove the network is a VM network.
     firewall_forwarded_sources = ["192.168.64.0/24"]
   

   Find the subnet with ifconfig on the host - for a vmnet.framework stack it is the bridge1xx interface serving the VM. Use the network address in CIDR form; host bits are normalized away. A configured entry matches on the source CIDR alone - it is an admin opt-in, so it is not tied to one interface. Entries must be IPv4; interception targets ctrld's IPv4 listener, so an IPv6 entry is ignored with a warning. Config only adds to auto-detection; it never disables it.

   A malformed or non-IPv4 entry is dropped with a warning and the rest of the set still applies - this field is deliberately not hard-validated at startup, so a typo in an MDM-pushed subnet cannot stop ctrld from serving DNS. The warning is logged when the set of bad entries changes, not on every internal rebuild, so a standing typo does not fill the log.

Guest start/stop and network changes

VM/container interfaces come and go while ctrld runs, and the pf watchdog does not rebuild an anchor whose rules are still intact. ctrld therefore tracks the effective forwarded-source set (auto-detected ∪ configured) and, whenever it changes, rebuilds the anchor and drops the pf states of the affected subnets (targeted pfctl -k <subnet>, not a global state flush) so the new policy applies immediately instead of when old states expire. A guest's in-flight connections are re-established under the new rules.

Reconciliation runs on interface appear/disappear, on network changes, on the delayed post-change re-checks (a new VM network often gets its address slightly after its interface appears), and on the pf watchdog tick - which bounds how long a started guest can go untrusted, or a stopped guest stay trusted, to one watchdog interval even if no network event fires. Each transition is logged with the subnets that gained and lost trust.

The set ctrld considers applied only advances once pf has actually accepted the new anchor. If the write or pfctl -f fails, the previous set stays recorded, nothing is flushed, a warning is logged, and the next reconciliation (at the latest the next watchdog tick) retries the same transition - so a transient failure cannot leave the old anchor installed while ctrld believes the change is done.

Supported behavior and trust boundary

For each source subnet (auto-detected or configured), when Firewall Mode + intercept are active, ctrld:

• Forces guest plaintext DNS (port 53) through ctrld (pf route-to lo0 onto the existing loopback redirect). Every guest resolution is policy-enforced and populates <ctrld_allowed>, so the guest's egress to allowed destinations is then permitted by the same allowlist rule as the host.
• Blocks guest IPv4 DoT (port 853) so a guest cannot swap in an alternate encrypted resolver to escape policy. Rules are emitted for the source's own address family only (all sources are IPv4) - pf refuses to load an entire anchor containing an inet6 rule with an IPv4 source, which would take DNS interception down with it. Guest traffic to an IPv6 DoT resolver is instead covered by the blanket IPv6 outbound block, since such a resolver never enters <ctrld_allowed>.

The boundary is explicit and per-subnet - a guest still cannot bypass Control D policy via a direct public IP (never resolved through ctrld ⇒ never allowlisted) or an alternate plaintext/DoT resolver. It is not an interface-wide permit.

Confirming what is trusted

At startup (and on every change) ctrld logs the effective set, naming each subnet's origin, so firewall_forwarded_sources can be verified without reading pf rules:

Firewall: forwarded-workload (VM/container) DNS interception active for these source subnets count=2 sources=["192.168.64.0/24 (auto-detected on bridge100)","192.168.252.0/24 (configured)"]

The interface named is where the address lives, which for a vmnet.framework stack is the bridge (bridge100), not its vmenet* member.

When the set is empty the log says so explicitly, rather than staying silent:

Firewall: no forwarded-workload (VM/container) sources — guest DNS is not intercepted. Auto-detection needs an up interface with an RFC1918 IPv4 address that is either vendor-named (vnic*, vboxnet*, vmnet*) or a bridge with a VM member (vmenet*); anything else must be listed in service.firewall_forwarded_sources

Note that firewall_forwarded_sources is a local config setting. If it is not in /etc/controld/ctrld.toml on the device, ctrld has nothing to act on - check the file itself, not only the dashboard.

Limitations

• A resolver running inside the guest is not supported while Firewall Mode is on. The design depends on the guest sending plaintext DNS (port 53) that host ctrld can observe. A guest-side resolver (ctrld, systemd-resolved with DoT, dnscrypt, ...) sends its upstream queries encrypted instead, so the host learns no addresses and the guest's egress is blocked - and its DoT is blocked outright by the port-853 rule. That is the trust boundary working as intended, not a regression: a guest that resolves privately could otherwise reach any destination it liked. Point the guest at the host bridge address (its default DHCP resolver) and let host ctrld enforce policy for it.
• DoH over 443 inside the guest is indistinguishable from ordinary HTTPS and is not intercepted. To keep enforcement strict, disable DoH in the guest OS/ browser, or restrict the guest to the host resolver.
• IPv6 guest DNS is not redirected (ctrld's intercept listener is IPv4); the anchor's existing IPv6 DNS block forces guests to fall back to interceptable IPv4 DNS. IPv6 forwarded sources are therefore unsupported: an IPv6 firewall_forwarded_sources entry is ignored with a warning rather than emitted as a rule.
• Auto-detection needs ownership proof: a vendor interface name, or a bridge with a vendor VM member. A VM network on a plain unrecognized interface, or a bridge whose hypervisor attaches no vendor-named member, needs an explicit firewall_forwarded_sources entry. Bridge membership is read with ifconfig, and only for a bridge that already carries an RFC1918 IPv4 address.
• macOS only. Windows (WFP) Firewall Mode VM behavior is tracked separately (#568).

Metrics

Allowlist stats are logged every 5 minutes:

Firewall allowlist stats allowed_ips=142 permanent_ips=18 tracked_domains=89 total_hits=4521 total_misses=23

Troubleshooting

Everything is blocked

• Check that the upstream resolver IPs are in the permanent allowlist (logged at startup)
• Verify DNS is working: nslookup example.com 127.0.0.1
• Check allowlist stats for hit/miss ratio

Certain apps don't work

• The app may be using hardcoded IPs (this is the intended behavior - those IPs aren't DNS-resolved)
• Check if the app uses a custom DNS resolver that bypasses ctrld
• RFC1918 traffic is always allowed, so LAN-only apps should work

High miss count

• Normal for the first few seconds after startup or network change
• Persistent high misses may indicate apps using hardcoded IPs extensively