docs(harness): start hook unchecked state and uninstall notes

Co-authored-by: capy-ai[bot] <230910855+capy-ai[bot]@users.noreply.github.com>

docs/hosts.md

@@ -85,7 +85,7 @@ It is off unless you turn it on, because turning it on changes the harness's own
 
 **Turn it on.** `gstack-harness register openclaw --start-hook` (or `hermes`), or `gstack-config set harness_start_hook on` followed by `./setup`, or `GSTACK_HARNESS_START_HOOK=1 ./setup --host openclaw`. The first of these that is set decides: the `--start-hook`/`--no-start-hook` flag, then `GSTACK_HARNESS_START_HOOK` (`1`/`on` or `0`/`off`), then `harness_start_hook`, then the choice saved in the registration's ledger. Whatever decides, the choice is saved, so refresh and upgrades keep it. The hook goes only into the harness profile's own plugin folder; a registration with a custom `--skills-dir`, or OpenClaw run with `OPENCLAW_CONFIG_PATH` pointing at another config, gets no hook (`HARNESS_HOOK_UNSUPPORTED` when you ask for one). A hook you already turned on stays on when a later run happens to have `OPENCLAW_CONFIG_PATH` set.
 
-**Check it.** The receipt and `gstack-harness status` show `start hook: active` (configured for new sessions; a running OpenClaw gateway or Hermes gateway picks it up when it reloads or restarts), `written` (files in place but not active, with the reason and the command that fixes it), `disabled` (you turned it off in the harness) or `off`. When the run that turns the hook on (or `--start-hook`) leaves it inactive, `gstack-harness register` and `./setup --host` exit 4 after registering the skills (`HARNESS_HOOK_INACTIVE`). Later refreshes and upgrades try once more each time, without failing, until the hook is active or you disable the plugin in the harness.
+**Check it.** The receipt and `gstack-harness status` show `start hook: active` (configured for new sessions; a running OpenClaw gateway or Hermes gateway picks it up when it reloads or restarts), `written` (files in place but not active, with the reason and the command that fixes it), `disabled` (you turned it off in the harness), `unchecked` (a run that left a hook already on alone, or `status --no-check`; `gstack-harness status` checks it) or `off`. When the run that turns the hook on (or `--start-hook`) leaves it inactive, `gstack-harness register` and `./setup --host` exit 4 after registering the skills (`HARNESS_HOOK_INACTIVE`). Later refreshes and upgrades try once more each time, without failing, until the hook is active or you disable the plugin in the harness.
 
 **Turn it off.** `gstack-harness register openclaw --no-start-hook` (or `hermes`), or `gstack-config set harness_start_hook off` followed by `./setup`. Either turns the plugin off through the harness's CLI and removes its folder. You can also switch it off in the harness (`openclaw config set plugins.entries.gstack-start.enabled false`, `hermes plugins disable gstack-start`); gstack then leaves it off and never turns it back on unless you pass `--start-hook` again. `gstack-harness unregister` and `gstack-uninstall` remove it with the rest (Hermes only disables it when its folder holds an edited file or a kept `.edited-*` copy, so your edit survives), and print the harness command to run when the harness CLI is not on `PATH`.
 

docs/uninstall.md

@@ -8,7 +8,7 @@ If gstack is installed on your machine:
 ~/.claude/skills/gstack/bin/gstack-uninstall
 ```
 
-This handles skills, symlinks, harness registrations (the files `gstack-harness` wrote into OpenClaw, Hermes, a Dot or another harness, from their ledgers), global state (`~/.gstack/`), project-local state, browse daemons, and temp files. Use `--keep-state` to preserve config and analytics. Use `--force` to skip confirmation.
+This handles skills, symlinks, harness registrations (the files `gstack-harness` wrote into OpenClaw, Hermes, a Dot or another harness, from their ledgers, plus the opt-in [start hook](hosts.md#start-hook), which it turns off through the harness's own CLI), global state (`~/.gstack/`), project-local state, browse daemons, and temp files. Use `--keep-state` to preserve config and analytics. Use `--force` to skip confirmation.
 
 ## Option 2: Manual removal (no local repo)
 
@@ -71,6 +71,13 @@ hook, the AskUserQuestion PreToolUse/PostToolUse hooks, and the Stop hooks
 (session timeline, plus verify-gate if you opted in). Left in place, they error
 on every matching event once the install directory is gone.
 
+If you turned on the OpenClaw or Hermes [start hook](hosts.md#start-hook),
+manual removal also leaves its `gstack-start` plugin turned on. Turn it off
+with `openclaw config unset plugins.entries.gstack-start` or `hermes plugins
+disable gstack-start`, then delete
+`${OPENCLAW_STATE_DIR:-~/.openclaw}/extensions/gstack-start` or
+`${HERMES_HOME:-~/.hermes}/plugins/gstack-start`.
+
 ## Clean up CLAUDE.md
 
 The uninstall script does not edit CLAUDE.md. In each project where gstack was added, remove the `## gstack` and `## Skill routing` sections.