gstack/CONTRIBUTING.md

# Contributing to gstack

Thanks for wanting to make gstack better. Whether you're fixing a typo in a skill prompt or building an entirely new workflow, this guide will get you up and running fast.

## Quick start

gstack skills are Markdown files that Claude Code discovers from a `skills/` directory. Normally they live at `~/.claude/skills/gstack/` (your global install). But when you're developing gstack itself, you want Claude Code to use the skills *in your working tree* — so edits take effect instantly without copying or deploying anything.

That's what dev mode does. It symlinks your repo into the local `.claude/skills/` directory so Claude Code reads skills straight from your checkout.

```bash
git clone <repo> && cd gstack
bun install                    # install dependencies
bin/dev-setup                  # activate dev mode
```

Now edit any `SKILL.md`, invoke it in Claude Code (e.g. `/review`), and see your changes live. When you're done developing:

```bash
bin/dev-teardown               # deactivate — back to your global install
```

## Operational self-improvement

gstack automatically learns from failures. At the end of every skill session, the agent
reflects on what went wrong (CLI errors, wrong approaches, project quirks) and logs
operational learnings to `~/.gstack/projects/{slug}/learnings.jsonl`. Future sessions
surface these learnings automatically, so gstack gets smarter on your codebase over time.

No setup needed. Learnings are logged automatically. View them with `/learn`.

### The contributor workflow

1. **Use gstack normally** — operational learnings are captured automatically
2. **Check your learnings:** `/learn` or `ls ~/.gstack/projects/*/learnings.jsonl`
3. **Fork and clone gstack** (if you haven't already)
4. **Symlink your fork into the project where you hit the bug:**
   ```bash
   # In your core project (the one where gstack annoyed you)
   ln -sfn /path/to/your/gstack-fork .claude/skills/gstack
   cd .claude/skills/gstack && bun install && bun run build && ./setup
   ```
   Setup creates per-skill directories with SKILL.md symlinks inside (`qa/SKILL.md -> gstack/qa/SKILL.md`)
   and asks your prefix preference. Pass `--no-prefix` to skip the prompt and use short names.
5. **Fix the issue** — your changes are live immediately in this project
6. **Test by actually using gstack** — do the thing that annoyed you, verify it's fixed
7. **Open a PR from your fork**

This is the best way to contribute: fix gstack while doing your real work, in the
project where you actually felt the pain.

### Session awareness

When you have 3+ gstack sessions open simultaneously, every question tells you which project, which branch, and what's happening. No more staring at a question thinking "wait, which window is this?" The format is consistent across all skills.

## Working on gstack inside the gstack repo

When you're editing gstack skills and want to test them by actually using gstack
in the same repo, `bin/dev-setup` wires this up. It creates `.claude/skills/`
symlinks (gitignored) pointing back to your working tree, so Claude Code uses
your local edits instead of the global install.

```
gstack/                          <- your working tree
├── .claude/skills/              <- created by dev-setup (gitignored)
│   ├── gstack -> ../../         <- symlink back to repo root
│   ├── review/                  <- real directory (short name, default)
│   │   └── SKILL.md -> gstack/review/SKILL.md
│   ├── ship/                    <- or gstack-review/, gstack-ship/ if --prefix
│   │   └── SKILL.md -> gstack/ship/SKILL.md
│   └── ...                      <- one directory per skill
├── review/
│   └── SKILL.md                 <- edit this, test with /review
├── ship/
│   └── SKILL.md
├── browse/
│   ├── src/                     <- TypeScript source
│   └── dist/                    <- compiled binary (gitignored)
└── ...
```

Setup creates real directories (not symlinks) at the top level with a SKILL.md
symlink inside. This ensures Claude discovers them as top-level skills, not nested
under `gstack/`. Names depend on your prefix setting (`~/.gstack/config.yaml`).
Short names (`/review`, `/ship`) are the default. Run `./setup --prefix` if you
prefer namespaced names (`/gstack-review`, `/gstack-ship`).

## Day-to-day workflow

```bash
# 1. Enter dev mode
bin/dev-setup

# 2. Edit a skill
vim review/SKILL.md

# 3. Test it in Claude Code — changes are live
#    > /review

# 4. Editing browse source? Rebuild the binary
bun run build

# 5. Done for the day? Tear down
bin/dev-teardown
```

## Testing & evals

### Setup

```bash
# 1. Copy .env.example and add your API key
cp .env.example .env
# Edit .env → set ANTHROPIC_API_KEY=sk-ant-...

# 2. Install deps (if you haven't already)
bun install
```

Bun auto-loads `.env` — no extra config. Conductor workspaces inherit `.env` from the main worktree automatically (see "Conductor workspaces" below).

### Test tiers

| Tier | Command | Cost | What it tests |
|------|---------|------|---------------|
| 1 — Static | `bun test` | Free | Command validation, snapshot flags, SKILL.md correctness, TODOS-format.md refs, observability unit tests |
| 2 — E2E | `bun run test:e2e` | ~$3.85 | Full skill execution via `claude -p` subprocess |
| 3 — LLM eval | `bun run test:evals` | ~$0.15 standalone | LLM-as-judge scoring of generated SKILL.md docs |
| 2+3 | `bun run test:evals` | ~$4 combined | E2E + LLM-as-judge (runs both) |

```bash
bun test                     # Tier 1 only (runs on every commit, <5s)
bun run test:e2e             # Tier 2: E2E only (needs EVALS=1, can't run inside Claude Code)
bun run test:evals           # Tier 2 + 3 combined (~$4/run)
```

### Tier 1: Static validation (free)

Runs automatically with `bun test`. No API keys needed.

- **Skill parser tests** (`test/skill-parser.test.ts`) — Extracts every `$B` command from SKILL.md bash code blocks and validates against the command registry in `browse/src/commands.ts`. Catches typos, removed commands, and invalid snapshot flags.
- **Skill validation tests** (`test/skill-validation.test.ts`) — Validates that SKILL.md files reference only real commands and flags, and that command descriptions meet quality thresholds.
- **Generator tests** (`test/gen-skill-docs.test.ts`) — Tests the template system: verifies placeholders resolve correctly, output includes value hints for flags (e.g. `-d <N>` not just `-d`), enriched descriptions for key commands (e.g. `is` lists valid states, `press` lists key examples).

### Tier 2: E2E via `claude -p` (~$3.85/run)

Spawns `claude -p` as a subprocess with `--output-format stream-json --verbose`, streams NDJSON for real-time progress, and scans for browse errors. This is the closest thing to "does this skill actually work end-to-end?"

```bash
# Must run from a plain terminal — can't nest inside Claude Code or Conductor
EVALS=1 bun test test/skill-e2e-*.test.ts
```

- Gated by `EVALS=1` env var (prevents accidental expensive runs)
- Auto-skips if running inside Claude Code (`claude -p` can't nest)
- API connectivity pre-check — fails fast on ConnectionRefused before burning budget
- Real-time progress to stderr: `[Ns] turn T tool #C: Name(...)`
- Saves full NDJSON transcripts and failure JSON for debugging
- Tests live in `test/skill-e2e-*.test.ts` (split by category), runner logic in `test/helpers/session-runner.ts`

### E2E observability

When E2E tests run, they produce machine-readable artifacts in `~/.gstack-dev/`:

| Artifact | Path | Purpose |
|----------|------|---------|
| Heartbeat | `e2e-live.json` | Current test status (updated per tool call) |
| Partial results | `evals/_partial-e2e.json` | Completed tests (survives kills) |
| Progress log | `e2e-runs/{runId}/progress.log` | Append-only text log |
| NDJSON transcripts | `e2e-runs/{runId}/{test}.ndjson` | Raw `claude -p` output per test |
| Failure JSON | `e2e-runs/{runId}/{test}-failure.json` | Diagnostic data on failure |

**Live dashboard:** Run `bun run eval:watch` in a second terminal to see a live dashboard showing completed tests, the currently running test, and cost. Use `--tail` to also show the last 10 lines of progress.log.

**Eval history tools:**

```bash
bun run eval:list            # list all eval runs (turns, duration, cost per run)
bun run eval:compare         # compare two runs — shows per-test deltas + Takeaway commentary
bun run eval:summary         # aggregate stats + per-test efficiency averages across runs
```

**Eval comparison commentary:** `eval:compare` generates natural-language Takeaway sections interpreting what changed between runs — flagging regressions, noting improvements, calling out efficiency gains (fewer turns, faster, cheaper), and producing an overall summary. This is driven by `generateCommentary()` in `eval-store.ts`.

Artifacts are never cleaned up — they accumulate in `~/.gstack-dev/` for post-mortem debugging and trend analysis.

### Tier 3: LLM-as-judge (~$0.15/run)

Uses Claude Sonnet to score generated SKILL.md docs on three dimensions:

- **Clarity** — Can an AI agent understand the instructions without ambiguity?
- **Completeness** — Are all commands, flags, and usage patterns documented?
- **Actionability** — Can the agent execute tasks using only the information in the doc?

Each dimension is scored 1-5. Threshold: every dimension must score **≥ 4**. There's also a regression test that compares generated docs against the hand-maintained baseline from `origin/main` — generated must score equal or higher.

```bash
# Needs ANTHROPIC_API_KEY in .env — included in bun run test:evals
```

- Uses `claude-sonnet-4-6` for scoring stability
- Tests live in `test/skill-llm-eval.test.ts`
- Calls the Anthropic API directly (not `claude -p`), so it works from anywhere including inside Claude Code

### CI

A GitHub Action (`.github/workflows/skill-docs.yml`) runs `bun run gen:skill-docs --dry-run` on every push and PR. If the generated SKILL.md files differ from what's committed, CI fails. This catches stale docs before they merge.

Tests run against the browse binary directly — they don't require dev mode.

## Editing SKILL.md files

SKILL.md files are **generated** from `.tmpl` templates. Don't edit the `.md` directly — your changes will be overwritten on the next build.

```bash
# 1. Edit the template
vim SKILL.md.tmpl              # or browse/SKILL.md.tmpl

# 2. Regenerate for all hosts
bun run gen:skill-docs --host all

# 3. Check health (reports all hosts)
bun run skill:check

# Or use watch mode — auto-regenerates on save
bun run dev:skill
```

For template authoring best practices (natural language over bash-isms, dynamic branch detection, `{{BASE_BRANCH_DETECT}}` usage), see CLAUDE.md's "Writing SKILL templates" section.

To add a browse command, add it to `browse/src/commands.ts`. To add a snapshot flag, add it to `SNAPSHOT_FLAGS` in `browse/src/snapshot.ts`. Then rebuild.

## Multi-host development

gstack generates SKILL.md files for 8 hosts from one set of `.tmpl` templates.
Each host is a typed config in `hosts/*.ts`. The generator reads these configs
to produce host-appropriate output (different frontmatter, paths, tool names).

**Supported hosts:** Claude (primary), Codex, Factory, Kiro, OpenCode, Slate, Cursor, OpenClaw.

### Generating for all hosts

```bash
# Generate for a specific host
bun run gen:skill-docs                    # Claude (default)
bun run gen:skill-docs --host codex       # Codex
bun run gen:skill-docs --host opencode    # OpenCode
bun run gen:skill-docs --host all         # All 8 hosts

# Or use build, which does all hosts + compiles binaries
bun run build
```

### What changes between hosts

Each host config (`hosts/*.ts`) controls:

| Aspect | Example (Claude vs Codex) |
|--------|---------------------------|
| Output directory | `{skill}/SKILL.md` vs `.agents/skills/gstack-{skill}/SKILL.md` |
| Frontmatter | Full (name, description, hooks, version) vs minimal (name + description) |
| Paths | `~/.claude/skills/gstack` vs `$GSTACK_ROOT` |
| Tool names | "use the Bash tool" vs same (Factory rewrites to "run this command") |
| Hook skills | `hooks:` frontmatter vs inline safety advisory prose |
| Suppressed sections | None vs Codex self-invocation sections stripped |

See `scripts/host-config.ts` for the full `HostConfig` interface.

### Testing host output

```bash
# Run all static tests (includes parameterized smoke tests for all hosts)
bun test

# Check freshness for all hosts
bun run gen:skill-docs --host all --dry-run

# Health dashboard covers all hosts
bun run skill:check
```

### Adding a new host

See [docs/ADDING_A_HOST.md](docs/ADDING_A_HOST.md) for the full guide. Short version:

1. Create `hosts/myhost.ts` (copy from `hosts/opencode.ts`)
2. Add to `hosts/index.ts`
3. Add `.myhost/` to `.gitignore`
4. Run `bun run gen:skill-docs --host myhost`
5. Run `bun test` (parameterized tests auto-cover it)

Zero generator, setup, or tooling code changes needed.

### Adding a new skill

When you add a new skill template, all hosts get it automatically:
1. Create `{skill}/SKILL.md.tmpl`
2. Run `bun run gen:skill-docs --host all`
3. The dynamic template discovery picks it up, no static list to update
4. Commit `{skill}/SKILL.md`, external host output is generated at setup time and gitignored

## Conductor workspaces

If you're using [Conductor](https://conductor.build) to run multiple Claude Code sessions in parallel, `conductor.json` wires up workspace lifecycle automatically:

| Hook | Script | What it does |
|------|--------|-------------|
| `setup` | `bin/dev-setup` | Copies `.env` from main worktree, installs deps, symlinks skills |
| `archive` | `bin/dev-teardown` | Removes skill symlinks, cleans up `.claude/` directory |

When Conductor creates a new workspace, `bin/dev-setup` runs automatically. It detects the main worktree (via `git worktree list`), copies your `.env` so API keys carry over, and sets up dev mode — no manual steps needed.

**First-time setup:** Put your `ANTHROPIC_API_KEY` in `.env` in the main repo (see `.env.example`). Every Conductor workspace inherits it automatically.

## Things to know

- **SKILL.md files are generated.** Edit the `.tmpl` template, not the `.md`. Run `bun run gen:skill-docs` to regenerate.
- **TODOS.md is the unified backlog.** Organized by skill/component with P0-P4 priorities. `/ship` auto-detects completed items. All planning/review/retro skills read it for context.
- **Browse source changes need a rebuild.** If you touch `browse/src/*.ts`, run `bun run build`.
- **Dev mode shadows your global install.** Project-local skills take priority over `~/.claude/skills/gstack`. `bin/dev-teardown` restores the global one.
- **Conductor workspaces are independent.** Each workspace is its own git worktree. `bin/dev-setup` runs automatically via `conductor.json`.
- **`.env` propagates across worktrees.** Set it once in the main repo, all Conductor workspaces get it.
- **`.claude/skills/` is gitignored.** The symlinks never get committed.

## Testing your changes in a real project

**This is the recommended way to develop gstack.** Symlink your gstack checkout
into the project where you actually use it, so your changes are live while you
do real work.

### Step 1: Symlink your checkout

```bash
# In your core project (not the gstack repo)
ln -sfn /path/to/your/gstack-checkout .claude/skills/gstack
```

### Step 2: Run setup to create per-skill symlinks

The `gstack` symlink alone isn't enough. Claude Code discovers skills through
individual top-level directories (`qa/SKILL.md`, `ship/SKILL.md`, etc.), not through
the `gstack/` directory itself. Run `./setup` to create them:

```bash
cd .claude/skills/gstack && bun install && bun run build && ./setup
```

Setup will ask whether you want short names (`/qa`) or namespaced (`/gstack-qa`).
Your choice is saved to `~/.gstack/config.yaml` and remembered for future runs.
To skip the prompt, pass `--no-prefix` (short names) or `--prefix` (namespaced).

### Step 3: Develop

Edit a template, run `bun run gen:skill-docs`, and the next `/review` or `/qa`
call picks it up immediately. No restart needed.

### Going back to the stable global install

Remove the project-local symlink. Claude Code falls back to `~/.claude/skills/gstack/`:

```bash
rm .claude/skills/gstack
```

The per-skill directories (`qa/`, `ship/`, etc.) contain SKILL.md symlinks that point
to `gstack/...`, so they'll resolve to the global install automatically.

### Switching prefix mode

If you vendored gstack with one prefix setting and want to switch:

```bash
cd .claude/skills/gstack && ./setup --no-prefix   # switch to /qa, /ship
cd .claude/skills/gstack && ./setup --prefix       # switch to /gstack-qa, /gstack-ship
```

Setup cleans up the old symlinks automatically. No manual cleanup needed.

### Alternative: point your global install at a branch

If you don't want per-project symlinks, you can switch the global install:

```bash
cd ~/.claude/skills/gstack
git fetch origin
git checkout origin/<branch>
bun install && bun run build && ./setup
```

This affects all projects. To revert: `git checkout main && git pull && bun run build && ./setup`.

## Community PR triage (wave process)

When community PRs accumulate, batch them into themed waves:

1. **Categorize** — group by theme (security, features, infra, docs)
2. **Deduplicate** — if two PRs fix the same thing, pick the one that
   changes fewer lines. Close the other with a note pointing to the winner.
3. **Collector branch** — create `pr-wave-N`, merge clean PRs, resolve
   conflicts for dirty ones, verify with `bun test && bun run build`
4. **Close with context** — every closed PR gets a comment explaining
   why and what (if anything) supersedes it. Contributors did real work;
   respect that with clear communication.
5. **Ship as one PR** — single PR to main with all attributions preserved
   in merge commits. Include a summary table of what merged and what closed.

See [PR #205](../../pull/205) (v0.8.3) for the first wave as an example.

## Upgrade migrations

When a release changes on-disk state (directory structure, config format, stale
files) in ways that `./setup` alone can't fix, add a migration script so existing
users get a clean upgrade.

### When to add a migration

- Changed how skill directories are created (symlinks vs real dirs)
- Renamed or moved config keys in `~/.gstack/config.yaml`
- Need to delete orphaned files from a previous version
- Changed the format of `~/.gstack/` state files

Don't add a migration for: new features (users get them automatically), new
skills (setup discovers them), or code-only changes (no on-disk state).

### How to add one

1. Create `gstack-upgrade/migrations/v{VERSION}.sh` where `{VERSION}` matches
   the VERSION file for the release that needs the fix.
2. Make it executable: `chmod +x gstack-upgrade/migrations/v{VERSION}.sh`
3. The script must be **idempotent** (safe to run multiple times) and
   **non-fatal** (failures are logged but don't block the upgrade).
4. Include a comment block at the top explaining what changed, why the
   migration is needed, and which users are affected.

Example:

```bash
#!/usr/bin/env bash
# Migration: v0.15.2.0 — Fix skill directory structure
# Affected: users who installed with --no-prefix before v0.15.2.0
set -euo pipefail
SCRIPT_DIR="$(cd "$(dirname "$0")/../.." && pwd)"
"$SCRIPT_DIR/bin/gstack-relink" 2>/dev/null || true
```

### How it runs

During `/gstack-upgrade`, after `./setup` completes (Step 4.75), the upgrade
skill scans `gstack-upgrade/migrations/` and runs every `v*.sh` script whose
version is newer than the user's old version. Scripts run in version order.
Failures are logged but never block the upgrade.

### Testing migrations

Migrations are tested as part of `bun test` (tier 1, free). The test suite
verifies that all migration scripts in `gstack-upgrade/migrations/` are
executable and parse without syntax errors.

## Shipping your changes

When you're happy with your skill edits:

```bash
/ship
```

This runs tests, reviews the diff, triages Greptile comments (with 2-tier escalation), manages TODOS.md, bumps the version, and opens a PR. See `ship/SKILL.md` for the full workflow.