gstack/docs/troubleshooting.md

# Troubleshooting gstack messages

Find the message you saw, then follow its fix. Every check gstack runs ends in
one of three states:

- **ran**: the check executed. It may still have found problems.
- **not run**: gstack chose not to run it (you turned it off, or nothing applied).
- **unavailable**: gstack tried and could not run it. This is missing coverage,
  never a pass.

A message that is not `ran` has this shape:

```
<check>: not run (<reason>). Fix: <command>
<check> unavailable: <reason> (<detail>). No review ran; this is missing coverage, not a pass. Fix: <command>
<check>: ran, verdict unverified (<reason>). Fix: read the output above
```

Search this page for the words after `unavailable:` or `not run (`. Each
section has a stable link anchor; the reason codes and anchors come from
`lib/gate-outcomes.ts`, and a free test fails if a code has no section here.

<a id="gstack-doctor"></a>
### Check readiness before a skill runs

Run `~/.claude/skills/gstack/bin/gstack-doctor` (other hosts: `./setup --status`
in your gstack checkout prints the doctor's absolute path). It prints one row
each for the install, state root, Bun, hooks, Codex, the cached Codex model
check, artifacts sync, the browse bundle, the other compiled binaries, the
/cso native helper, Claude Code, the largest session journal and recent
/autoplan guard codes. Each row is `ok`, `warn`,
`not configured` or `fail` with its fix; only `fail` exits non-zero. It makes
no paid call: the Codex rows report the cached model check and its age, and
`--live` runs that check once. Paste its output into bug reports.

---

## Model policy

The [model-policy guide](model-policy.md) explains the two tiers, all six
settings, precedence and the read-only inspection command. A resolved selection
is not proof that the requested provider or model can run.

<a id="model-policy-config"></a>
### Model policy configuration is invalid or unreadable

**Meaning.** The new policy path could not read a coherent configuration or a
configured value is invalid. An unreadable file is not treated as an absent
setting: doing that could silently select the premium default.

**Fix.** Repair the file or key named by the error. `plan_review_tier` accepts
`frontier`, `smart` or `host`; `implementation_tier` accepts `frontier` or
`smart`. Use `gstack-config unset <key>` to restore a default, not an empty
value. A rejected `set` leaves the old value intact. Correct ownership/read
permissions rather than deleting an unrelated state directory.
For a malformed line such as `plan_review_tier = smart`, edit the reported file
and correct or remove that line first: `unset` only removes canonical `key:`
records and cannot repair a misspelled delimiter or quoted key.

**Expected result.** `gstack-models list` or the corresponding `resolve`
command explains the winning source. No outside model call ran on this error.

<a id="model-policy-provider"></a>
### A custom provider needs an explicit model or host mode

**Meaning.** Native settings or environment flags route the reviewer to a
custom endpoint or partner platform. A public API catalog identifier is not
necessarily a valid deployment identifier there. Malformed native provider
configuration also prevents gstack from assuming the public endpoint.

**Fix.** Supply a compatible model for that request, set the provider's gstack
environment override or tier-model setting, or choose
`gstack-config set plan_review_tier host`. Keep credentials in the provider's
normal authentication mechanism, never in a model setting. If the error names
a malformed native configuration, fix that source first.

**Expected result.** Inspection reports an explicit selection or honest
host-managed delegation. It does not certify account entitlement or send a
public default to an inferred custom endpoint.

<a id="model-policy-selection"></a>
### The selected review model could not be used

**Meaning.** The requested model was rejected or the provider could not
complete the review. A model may be nonexistent, unavailable to the account,
retired, or behind a misconfigured endpoint; preserve the provider's evidence
rather than treating all of these as the same diagnosis. No successful outside
review is implied, and gstack does not substitute a different model.

**Fix.** Change the source named in the error. For example, an environment
override beats a tier setting, so editing the tier cannot replace it. Unset or
correct that override, or explicitly name a supported model for the request.
Follow the existing auth, quota, sandbox or timeout repair when that is the
reported failure. Missing usage identity remains unknown, even if inspection
showed a requested ID.

**Expected result.** The next invocation announces its model and source,
checks that same selection and reports the actual provider result. A cached
probe or a native fallback is not a completed outside review.

<a id="model-policy-freshness"></a>
### Model-catalog freshness is unknown, stale or needs an update

**Meaning.** Official evidence changed, a required source could not be
checked, or the retained evidence does not match this catalog and parser.
`unknown/source-unavailable` is not current. A later source failure must not
erase an earlier retirement finding or close its maintenance issue.

**Fix.** Read the failed source and evidence details in the freshness workflow
report and tracking issue. Repair the source parser or publication access when
needed, then run the workflow manually against the default branch. If a model
was superseded or deprecated, follow the [maintainer checklist](model-policy.md#maintainer-update-checklist)
to qualify a replacement or record a supported mitigation. Do not clear the
issue just because a new release has not been adopted yet.

**Expected result.** Complete source checks produce evidence bound to the
current catalog, while unresolved lifecycle findings remain visible. Personal
pins and unrelated PRs are unchanged. Check the workflow's last run date too:
a scheduled job that never runs cannot report its own absence.

#### Repairing `recoveryRequired` state

This flag deliberately keeps the issue open until a maintainer repairs the
record. Another successful fetch alone cannot certify corrupted history.

1. Save the current issue body, including its retained recovery archive, and
   download the latest trustworthy workflow report. Use its `report.state` as
   the starting state; do not invent run IDs, catalog hashes or check dates.
2. Reconcile its `lifecycle` array with the issue's independent lifecycle block
   and any retained archive. Preserve known retirements, deadlines and human
   dispositions. A model currently in the catalog must not keep an old
   `resolvedByCatalog` flag from a previous replacement.
3. In the issue editor, restore valid JSON between the `state:begin` and
   `state:end` marker lines. Put that same lifecycle array between
   `lifecycle:begin` and `lifecycle:end`. Restore the standalone ownership and
   region markers, and leave human text outside the owned region intact.
4. Set `recoveryRequired` to `false` only after that reconciliation. If prior
   successful evidence cannot be verified, set `lastSuccess` to `null` rather
   than making up a fresh success. If lifecycle history cannot be recovered,
   leave the flag set and the issue open for investigation.
5. Run **Model-policy freshness** against the default branch. Only complete,
   current evidence with no unresolved findings can close the issue. A parsing
   or source error leaves it open; do not clear history to manufacture a pass.

## Outside reviews (Codex and Claude Code)

Outside reviews send your diff, plan or question to a second AI provider. Their
verdict comes from `lib/outside-review-result.ts`, which prints
`VERDICT: clean|findings|unverified|unavailable`. A `findings` verdict with a
P0 or P1 finding blocks exactly like a native P0/P1. `unverified` and
`unavailable` are missing coverage: /ship and /review continue, show the gap in
the readiness dashboard and the PR body, and never count it as a pass.

<a id="outside-review-verdict"></a>
### How the verdict is read from a review

- **Severity tags.** `[P0]`-`[P3]`, Codex's native `P1:` labels, and a P0-P3
  label at the start of a line after an optional heading, bullet, number or
  bold: `**P1 — x**`, `**P1** — x`, `1. P2 — x`, `P2 —`, `### P1`, or a table
  cell `| P1 |`. P0 and P1 block; P2 and P3 are advisory. A P0-P3 token in that
  label position that none of these forms reads (`## P1/P2 findings`) makes the
  review [`unverified`](#outside-review-unparsed-severity), never `clean`. Code
  fences and inline code are quotes, not labels.
- **Severity words in label position.** `Severity: High`, `Priority: low`, a
  line that starts with `High:`, `High —`, `[High]` or `**High**` (after an
  optional heading, bullet or number), a bold `**High**` anywhere, or a table
  cell `| high |`. Critical and High block like P0 and P1; Medium and Low are
  advisory like P2 and P3. Words inside prose do not count: "high-level",
  "low-risk", "a medium-term follow-up" and "no critical findings" are not
  findings.
- **Every review gate.** These rules apply to every gate that summarises a
  review, including the `execution` gate behind `/codex` consult and challenge.
  A reply whose last `Verdict:` line says `not ready` is `findings` and exits
  3 even when readable advisory severities (P2 or P3) were parsed; `FINDINGS:`
  names the highest one. A not-ready reply with no readable severity still
  prints `FINDINGS: unspecified` and exits 3.
- **No findings.** A review with no tag and no label is `clean` only when its
  conclusion says so: the last sentence (or its last ", and" clause), or the
  `because` clause of its `Recommendation:` line, opens with `NO_FINDINGS`,
  "No issues found", "I found no actionable regressions" or "I did not find
  any bugs", with no "but", "however", "except", "other than" or "elsewhere".
  When other prose comes first, anything after that statement except a
  predicate ("were found", "is evident") or a colon explanation must scope it
  to the change as a whole ("in this change", "in the staged changes"); "No
  issues in the parser." does not conclude the review. A "no issues" phrase
  anywhere else in the reply does not count. Otherwise the review is
  `unverified` (see below), never `clean`. A `/codex` consult
  answer with no severity labels at all is not a review summary and stays
  `clean`.
- **Design proposals** (the design-direction voices in /design-consultation
  and /office-hours) are read with the `proposal` gate: a completed proposal
  needs only its `Recommendation: ... because ...` line.

Outside-review prompts ask the reviewer to label each finding Critical, High,
Medium or Low, so most reviews land on `findings` or `clean`.

<a id="sourced-helper-location"></a>
### `gstack: cannot load gstack-codex-probe` / `gstack: cannot locate <helper> (shell: ...)` / `CODEX_MODE: helper_unavailable`

**Meaning.** Skills run `gstack-codex-probe` as a command, one subcommand per
check, so the shell your agent uses does not matter. `cannot load
gstack-codex-probe` and `CODEX_MODE: helper_unavailable` mean the probe file is
missing or not executable in your install.

`cannot locate <helper> (shell: ...)` comes from a helper that is still loaded
into your shell with `source` (`gstack-egress-lib.sh`, and the Codex probe when
a skill rendered before the upgrade sources it). Such a helper finds its own
directory from bash (`BASH_SOURCE`) or zsh (`%x`). In any other shell (dash,
sh), or when the shell cannot say which file it is reading, it stops instead of
guessing a path. The message names the shell it saw.

**Fix.** For `cannot load`, re-run `./setup` from your gstack checkout (or
`/gstack-upgrade`). For `cannot locate`, run the skill from bash or zsh (the
macOS and Linux defaults), or tell the helper where gstack is installed:

```bash
export GSTACK_ROOT=~/.claude/skills/gstack   # your install dir; it holds bin/
```

If you see `gstack: sourcing gstack-codex-probe is deprecated ...`, a skill
rendered before the upgrade is still sourcing the probe. It keeps working
until a release on or after 2026-10-21; run `/gstack-upgrade` to re-render
your skills now.

**Expected result.** `~/.claude/skills/gstack/bin/gstack-codex-probe select-model exec`
prints `CODEX_SEL: <model>` (and `CODEX_MODEL: <model> (exec; source: ...)` on
stderr) from any shell, and preflights print a `CODEX_MODE` other than
`helper_unavailable`. `gstack-codex-probe help` lists every subcommand.

<a id="codex-sandbox-unavailable"></a>
### `Codex outside review unavailable: Codex's sandbox could not start here (...)`

**Meaning.** Codex runs every command inside a Linux sandbox (bubblewrap). In
many containers and devcontainers the kernel does not allow unprivileged user
namespaces, so the sandbox cannot start and every command Codex tries fails.
gstack reports this instead of trusting a review that read nothing.
`CODEX_MODE: sandbox_unavailable` is the same condition found by the free
preflight before any paid call.

**What is kept.** Nothing was sent for review, or the review was discarded. Your
code and files are unchanged.

**Fix.** Enable unprivileged user namespaces for the container (for Docker, a
seccomp profile that allows them), or, inside a container you trust, run
Codex without its sandbox for this shell:

```bash
export GSTACK_CODEX_NO_SANDBOX=1
```

**Expected result.** With namespaces enabled, the next review prints
`OUTSIDE_STATUS: completed`. With `GSTACK_CODEX_NO_SANDBOX=1`, every review
prints `WARNING: GSTACK_CODEX_NO_SANDBOX=1: ...` because Codex can then read
and write anything your user can. Only the exact value `1` works, and only from
your shell environment.

<a id="outside-review-commands-failed"></a>
### `... outside review unavailable: the reviewer could not run commands or read the diff (...)`

**Meaning.** The reviewer tried to run commands but none succeeded, or its
answer says it could not run commands or read the diff. A "no issues found"
written after that is not a review.

**What is kept.** Nothing; the answer is shown above but not counted.

**Fix.** Read the reviewer's stderr above, repair what it names, and re-run.

**Expected result.** `OUTSIDE_STATUS: completed` with a `VERDICT:` line.

<a id="outside-review-execution-failed"></a>
### `... outside review unavailable: the reviewer process failed (exit N: ...)`

**Meaning.** The provider CLI exited non-zero. The first stderr line is in the
parentheses.

**What is kept.** Partial output is shown above; it is not counted.

**Fix.** Repair the cause in the provider diagnosis (log in again, fix the
model, check the network), then re-run.

**Expected result.** `OUTSIDE_STATUS: completed`.

<a id="outside-review-timeout"></a>
### `... outside review unavailable: the reviewer hit its time limit and was stopped (exit 124)`

**Meaning.** The provider did not finish within its deadline and was stopped.

**What is kept.** Partial output is shown above; it is not counted.

**Fix.** Re-run with a smaller scope, or check the provider's status and your
network.

**Expected result.** `OUTSIDE_STATUS: completed`.

<a id="outside-review-empty-response"></a>
### `... outside review unavailable: the reviewer returned no response`

**Meaning.** The provider exited successfully but returned nothing.

**Fix.** Read the stderr above, then re-run.

**Expected result.** `OUTSIDE_STATUS: completed`.

<a id="outside-review-refused"></a>
### `... outside review unavailable: the reviewer declined to review`

**Meaning.** The provider answered with a refusal instead of a review.

**Fix.** Re-run; if it declines again, rely on the native review.

**Expected result.** `OUTSIDE_STATUS: completed`.

<a id="outside-review-missing-markers"></a>
### `... outside review unavailable: the response lacks the markers this gate requires (...)`

**Meaning.** The answer did not contain what the gate checks: a
`Recommendation: ... because ...` line, a `SCORE:`/`AMBIGUITIES:` pair, or
severity tags.

**Fix.** Re-run the review.

**Expected result.** `OUTSIDE_STATUS: completed`.

<a id="outside-review-unverified"></a>
### `... outside review: ran, verdict unverified (...)` / `OUTSIDE_STATUS: unverified` / `GATE: UNVERIFIED`

**Meaning.** The review completed but had no severity tag or label and gave
no explicit no-findings conclusion, so no pass or fail can be read from it
([how the verdict is read](#outside-review-verdict)).

**What is kept.** The full answer is shown above.

**Fix.** Read the output above and decide. It is not a pass, and /ship and
/review list it as missing coverage.

<a id="outside-review-unparsed-severity"></a>
### `... outside review: ran, verdict unverified (the review labels a finding with a P0-P3 severity in a form the parser cannot read (line N: "..."))` / `REASON: unparsed_severity`

**Meaning.** The reply starts a line with a P0-P3 token, the place a finding's
label goes, but in a form gstack does not read as one severity, for example
`## P1/P2 findings` or `- P2/P3 nits`. gstack will not guess which severity
applies, so the verdict is unverified instead of `clean`. The quoted line in
parentheses (also printed as `UNPARSED:`) is the first such label. When the
same reply also has a readable P0 or P1 finding, that finding blocks
(`VERDICT: findings`, exit 3) and the unparsed line is still printed.

**What is kept.** The full reply is shown above.

**Fix.** Read the quoted line and the reply, and decide; it is not a pass.
Re-run the review and ask the reviewer to label each finding `[P1] <title>` or
`P1: <title>`. To re-check a saved or corrected reply, run from your gstack
checkout:

```bash
bun lib/outside-review-result.ts --verdict execution reply.md
```

(use `review` or `structured` for those gates).

**Expected result.** `VERDICT: findings` or `VERDICT: clean` with a P0-P3
`FINDINGS:` value, and no `UNPARSED:` line.

<a id="codex-model-unusable"></a>
### `CODEX_MODE: model_unusable` / `MODEL_UNUSABLE`

**Meaning.** Codex rejected the selected model: the account cannot use it
(HTTP 400), the model is retired, or a custom provider's `base_url` is wrong
(HTTP 404). The `CODEX_MODEL:` line names the model and where it came from.

**Fix.** Choose a model your account can use, or correct the provider:

```bash
export GSTACK_CODEX_MODEL=<supported-model>
# or edit model / base_url in ${CODEX_HOME:-~/.codex}/config.toml
```

**Expected result.** `CODEX_MODE: ready`.

<a id="codex-quota-exhausted"></a>
### `CODEX_MODE: quota_exhausted` / `MODEL_QUOTA_EXHAUSTED`

**Meaning.** Codex refused the call because the account behind it hit its
usage limit (`You've hit your usage limit`, or `insufficient_quota`). The line
under the marker is Codex's own message, with its reset time and where to buy
more. The model choice is fine. gstack reports outside coverage as
unavailable, never as a pass, and caches the result for 15 minutes, so the
rest of the run (and other skills) make no Codex call. The HINT line says how
many minutes remain.

**Fix.** Wait for the reset time in Codex's message, or add credits or a
higher plan for that account. To use a different account, sign in again:

```bash
codex login
```

To re-check before gstack's 15-minute cache expires (for example, right after
buying credits), skip the cached result for one check, or delete it:

```bash
export GSTACK_CODEX_PROBE_RETRY=1   # unset it again afterwards
# or
rm -f ~/.gstack/.codex-model-probe  # <state root>/.codex-model-probe
```

**Expected result.** After the reset (or after `codex login`, which changes
the auth signature and re-probes at once), `CODEX_MODE: ready`.

<a id="codex-rate-limited"></a>
### `CODEX_MODE: unverified (rate_limited)` / `MODEL_PROBE_RATE_LIMITED` / `unavailable: Codex rate-limited the review`

**Meaning.** Codex answered HTTP 429 (too many requests), which usually clears
within seconds. It is a different state from `quota_exhausted` and is never
cached. At probe time the review still runs, and its own result decides. A 429
during the review itself means that review failed, so coverage is missing,
never a pass.

**Fix.** Re-run the review in a minute. If 429s persist, check the rate limits
for the account or API key on the provider's dashboard.

**Expected result.** `CODEX_MODE: ready`, and the review completes.

<a id="codex-mode-unverified"></a>
### `CODEX_MODE: unverified` / `MODEL_PROBE_INCONCLUSIVE`

**Meaning.** The short model check timed out or hit a network error, so gstack
could not confirm the model works. The review still runs and its own result is
checked.

**Fix.** Nothing now. If the review then fails, its message says why.

<a id="codex-auth-failed"></a>
### `CODEX_MODE: not_authed` / `AUTH_FAILED`

**Meaning.** No Codex credentials were found: no `CODEX_API_KEY`, no
`OPENAI_API_KEY`, no `auth.json`, and no set environment variable named by a
custom provider's `env_key` in `config.toml`.

**Fix.**

```bash
codex login
```

or export the variable your provider's `env_key` names.

**Expected result.** `CODEX_MODE: ready`.

<a id="outside-review-disabled"></a>
### `Codex review skipped (codex_reviews disabled)` / `CODEX_MODE: disabled`

**Meaning.** You turned outside reviews off. This is `not run`, never a pass and
never an outage.

**Fix.** To turn them back on:

```bash
gstack-config set codex_reviews enabled
```

<a id="outside-review-consent-missing"></a>
### `outside review: not run (outside reviews are turned off ... ). Fix: gstack-config set codex_reviews enabled ...` / `OUTSIDE_STATUS: not_run reason=consent_missing`

**Meaning.** The send itself refused. `gstack-codex-probe run-with-timeout`,
`gstack-claude-code`, `gstack-outside-voice` and the unattended
`gstack-autoplan` runner read `codex_reviews` before they send repository
content to an outside model. When it is `disabled`, or when the config file
exists but cannot be read (or holds a value other than `enabled` or
`disabled`), they print this line, start no CLI and make no API request. An
unset `codex_reviews` means the default, `enabled`, and the first send on a
machine prints the [notice](#codex-review-notice) below. A review you ask for by
name (`/codex`, `/claude-code`) passes `--user-invoked` and still runs. This is
`not run`, never a pass and never an outage; `/autoplan` records it as the
phase's outside outcome (`status: disabled`, `outcome: not_run`,
`reason: consent_missing`).

**Fix.** To allow outside reviews again:

```bash
gstack-config set codex_reviews enabled
gstack-config get --stored codex_reviews   # enabled, disabled, unset, or unreadable (exit 2)
```

If the stored read exits 2, fix the permissions or the malformed
`codex_reviews` line in the `config.yaml` it names, then re-run.

<a id="codex-review-notice"></a>
### `NOTICE: gstack outside reviews send the review prompt and code to Codex (...) using ...`

**Meaning.** Outside reviews are on by default. The first one on a machine
says which provider receives your prompt and code and which login or key pays
for it. It shows once (gstack records `.codex-review-notice-shown` in its state
directory) and never blocks the review.

**Fix.** Nothing, if that is what you want. To stop sending code to Codex:

```bash
gstack-config set codex_reviews disabled
```

**Expected result.** Later reviews print `Codex review skipped (codex_reviews disabled)`
or `CODEX_MODE: disabled`, and /ship and /review show the outside review as not run.

---

## /ship, /review and /document-release

<a id="ship-no-version-source"></a>
### `Shipped without a version change: no version source is configured (no VERSION file, no .gstack/version-path). ...`

**Meaning.** /ship found no version file it owns: there is no `VERSION`, no
`.gstack/version-path`, or release automation (release-please, Changesets,
semantic-release, a workspace monorepo, a placeholder package.json version)
owns the version. This is `not run` for the version bump.

**What is kept.** Everything else ships. No bump, no CHANGELOG version header,
no `vX.Y.Z` PR title prefix.

**Fix.** To have /ship version releases, create `VERSION`, or pin the file:

```bash
echo package.json > .gstack/version-path && git add .gstack/version-path
```

**Expected result.** The next /ship bumps that file and writes a CHANGELOG header.

<a id="ship-version-source-broken"></a>
### `gstack-version-bump: classify: version source is broken: <path> ...`

**Meaning.** The pinned version file does not exist, is empty, unreadable, or
contains no parsable version. /ship stops instead of inventing `0.0.0.0`.

**What is kept.** Nothing was written.

**Fix.** Repair that file, or correct `--version-path` / `.gstack/version-path`.

**Expected result.** `gstack-version-bump classify` prints the current version.

<a id="review-base-stale"></a>
### `BASE_REFRESH: stale <rev>` / `Base coverage: stale at <rev>`

**Meaning.** /review could not fetch the base branch (offline, no credentials,
or a read-only `.git` such as Codex's sandbox), so it reviewed against your
local `origin/<base>` at `<rev>`.

**Fix.** Run `git fetch origin <base>` outside the sandbox and rerun /review if
the base has moved.

<a id="review-fingerprint-tmpdir"></a>
### `gstack-wtree: cannot create a temp index under <dir>; set TMPDIR to a writable directory` / `gstack-review-log: cannot create a private object directory under <dir>; no working-tree fingerprint. Set TMPDIR to a writable directory.`

**Meaning.** /review fingerprints the working tree in a private temporary
object directory (Codex's sandbox keeps `.git` read-only). The temp directory
could not be created, so this review has no fingerprint and later steps cannot
reuse its evidence.

**Fix.** `export TMPDIR=<a writable directory>`, then run /review again.

<a id="review-fingerprint-stage"></a>
### `gstack-wtree: cannot stage the working tree: <git error>`

**Meaning.** The fingerprint's objects could not be written. Standalone
`gstack-wtree` writes into the repository's object store.

**Fix.** Run it through /review (`gstack-review-log` supplies a private object
directory), or make `.git/objects` writable.

<a id="plan-audit-not-run"></a>
### `Plan completion audit: not run (no plan is bound to this branch and no docs/designs/ file matches). Fix: ...`

**Meaning.** /ship and /review audit a PR against the plan bound to its branch
(plan mode, /autoplan, or a `Plan: <path>` line in the PR body). With none bound
and no matching `docs/designs/` file, they no longer pick the newest unrelated
plan; the audit is `not run`.

**Fix.** Add `Plan: docs/designs/<file>.md` to the PR body, or run /autoplan.

**Expected result.** The next /ship or /review prints the audit against that plan.

<a id="plan-eng-review-not-persisted"></a>
### `PERSISTED: no` / `PERSIST: gstack-review-log '{...}'` / `no saved Eng Review: run the PERSIST: line ...`

**Meaning.** /plan-eng-review ran where the caller forbids writes (for example
a delegating agent keeps the reviewer read-only, so it cannot edit the plan it
judges). The review completed: it ends `DONE` with `PERSISTED: no`, records
telemetry `success`, and returns the full report and decision ledger in its
reply. Nothing was saved, so /ship's readiness dashboard has no Eng Review
record and reports NOT CLEARED with "no saved Eng Review". A real failure (a
permitted save that failed, stale evidence) still ends `BLOCKED`.

**What is kept.** The reply holds the complete report; its last line is the
review-log command with this review's values.

**Fix.** From the reviewed repository, run the reply's last line without the
`PERSIST: ` prefix:

```bash
~/.claude/skills/gstack/bin/gstack-review-log '{"skill":"plan-eng-review",...}'
```

Or rerun /plan-eng-review where it may write its report and log.

**Expected result.** `gstack-review-read` lists the `plan-eng-review` entry and
/ship's dashboard shows the Eng Review row (CLEAR when its status is `clean`).

<a id="learnings-bun-missing"></a>
### `gstack-learnings-search: bun not found on PATH, so learnings could not be read. Fix: ...`

**Meaning.** Learnings search (and `gstack-timeline-read`, "the timeline") needs
Bun. It exits 127 instead of looking like "no learnings".

**Fix.** Install Bun from https://bun.sh, then `cd <gstack checkout> && ./setup`.

**Expected result.** Skills print your prior learnings again.

<a id="learnings-unavailable"></a>
### `LEARNINGS: unavailable (<first stderr line>)`

**Meaning.** A skill's learnings lookup failed (often Bun is missing). Skills
used to show nothing here, which looked like "no learnings".

**What is kept.** Your learnings file is untouched; the skill continues without them.

**Fix.** Read the reason in parentheses. If it names Bun, install it and re-run
`./setup`.

<a id="log-tmpdir-unwritable"></a>
### `gstack-learnings-log: could not create a temp file in <dir>, so the learning was not recorded. Fix: ...`

**Meaning.** The learnings, question and preference logs write through a temp
file in `${TMPDIR:-/tmp}`. A sandbox that blocks it used to drop the entry silently.

**Fix.** `export TMPDIR=<a writable directory>` and log again.

<a id="plan-tune-not-calibrated"></a>
### `CALIBRATION: not calibrated: no recorded signals`

**Meaning.** Your logged answers matched no psychographic signal, so /plan-tune
has nothing to calibrate from. It no longer says "calibrated".

**Fix.** Answer more registered questions, then `gstack-developer-profile --derive`.

<a id="artifact-case-collision"></a>
### `ARTIFACTS_SYNC: attention: case-collision held=<N> names=<names>. Artifact paths differ only by letter case, ...`

**Meaning.** The artifacts repo holds paths that differ only by letter case,
such as `projects/MyApp/` and `projects/myapp/`. A Mac or Windows disk stores
them as one file, so git there would stage a write under the other spelling,
and sync would report success while one spelling stays modified and the other
machines read stale data (#3220). Sync now holds every queued file under such a
path instead of staging it: the file stays queued, everything else keeps
syncing, and the status is `collision` rather than `ok`. When only one
spelling is tracked, that spelling keeps syncing and only the new alias is
held; when neither is tracked yet, both wait. `<names>` are the colliding folder or file names; `gstack-brain-sync
--status` lists the held paths in `message`. A local commit that would push a
new alias to the remote (two machines created both spellings at once) is
refused with status `error` and kept locally.

Nothing is repaired automatically. Slug resolution and skill start are
unaffected; only the sync holds files.

**Fix.** Keep one spelling, by hand, on one machine:

1. Choose the spelling to keep: the one `gstack-slug` prints in that project
   today. If the project resolves to different spellings (a remote URL typed
   two ways, a folder reached as `~/code/MyApp` and `~/code/myapp`), make it
   stable first: fix the remote URL's case, or set `GSTACK_PROJECT_SLUG`.
2. Fold the other spelling's tracked files into the kept one. Read both
   spellings from git, because a Mac's working tree shows only one of them,
   and the working files too, because they hold the held, unsynced writes.
   This loop covers the dropped spelling's tracked files and its untracked
   ones (held writes that never synced). It folds JSONL logs (concatenated,
   duplicate lines dropped) and prints every other file for you to decide:

   ```bash
   cd ~/.gstack
   keep=projects/MyApp; drop=projects/myapp
   { git -c core.ignorecase=false ls-files -- "$drop"; git -c core.ignorecase=false ls-files --others -- "$drop"; } | sort -u | while IFS= read -r f; do
     rel=${f#"$drop"/}
     case "$rel" in *.jsonl) ;; *) echo "decide by hand: $f"; continue ;; esac
     { git show ":$keep/$rel"; git show ":$f"; cat "$keep/$rel" "$f"; } 2>/dev/null | awk '!seen[$0]++' > "$HOME/.gstack-fold.tmp"
     mkdir -p "$keep/$(dirname "$rel")" && mv "$HOME/.gstack-fold.tmp" "$keep/$rel"
     git -c core.ignorecase=false add -f -- "$keep/$rel"
     git -c core.ignorecase=false rm -q --cached --ignore-unmatch -- "$f"
     echo "folded: $keep/$rel"
   done
   ```

   For each file it prints (Markdown, JSON snapshots such as
   `decisions.active.json`), compare `git show ":$keep/<file>"` with
   `git show ":$drop/<file>"`, write the content to keep to `"$keep/<file>"`,
   then run the same `git -c core.ignorecase=false add -f -- "$keep/<file>"`
   and `git -c core.ignorecase=false rm -q --cached --ignore-unmatch -- "$drop/<file>"`. Never
   concatenate a JSON snapshot. Then commit and push:

   ```bash
   git -c core.ignorecase=false commit -m "repair: fold $drop into $keep"
   git push origin HEAD
   ```

   On Linux the two folders are separate on disk: after the commit, check
   that `git -c core.ignorecase=false ls-files --others -- "$drop"` lists
   nothing you have not folded or moved, then remove the dropped folder
   (`rm -r "$drop"`). On a Mac or Windows they are the same folder, so do
   not remove anything.
3. Clear the held records of the dropped spelling and queue the kept files:
   `gstack-brain-sync --skip-file <dropped path>` for each held path that
   `--status` lists, then `gstack-brain-enqueue <kept path>` for each
   `folded:` line and each file you moved by hand, and
   `gstack-brain-sync --once`.
4. On every other machine, let the next skill start pull the repair (or run
   `git -C ~/.gstack pull`). The line disappears once no tracked path
   differs only by case.

<a id="skill-start-former-bucket"></a>
### `gstack: earlier data for this project is in projects/<slug> (a worktree's old bucket). Merge it: ...`

**Meaning.** Linked worktrees now share the main checkout's project identity.
Learnings and checkpoints a worktree wrote under its own old bucket still exist.

**Fix.** Merge them (logs are de-duplicated, conflicts listed, nothing overwritten):

```bash
gstack-slug --adopt-legacy --from <slug>
```

Or stop the reminder: `gstack-slug --adopt-legacy --dismiss <slug>`.

---

## Design skills

<a id="design-not-available"></a>
### `DESIGN_NOT_AVAILABLE: <path> --version exited <code>` (or `timed out after 10s`, `is not installed`, `no timeout/gtimeout/perl ...`)

**Meaning.** Design skills now run `"$D" --version` with a 10-second deadline
before claiming `DESIGN_READY`. Exit 137 means macOS killed the binary at launch
(a bad code signature); setup prints the same condition as
`design unavailable: <bin> is killed at launch (exit 137) after re-signing`.

**What is kept.** Nothing was generated or spent.

**Fix.** Re-run setup, which rebuilds and re-signs the binary:

```bash
cd <gstack checkout> && ./setup
```

If the message names a missing timeout tool, install coreutils (`gtimeout`) or perl.

**Expected result.** The next design skill prints `DESIGN_READY`.

<a id="design-image-model-invalid"></a>
### `GSTACK_DESIGN_IMAGE_MODEL="<value>" is not a gpt-image model name (expected something like gpt-image-2); fix it or unset it to use gpt-image-2`

**Meaning.** The design binary refuses an image tool model override that is not
a `gpt-image-*` model name, before sending any request.

**Fix.** `export GSTACK_DESIGN_IMAGE_MODEL=gpt-image-2` (or another gpt-image
model your key can use), or `unset GSTACK_DESIGN_IMAGE_MODEL`.

<a id="design-taste-profile-unavailable"></a>
### `TASTE_PROFILE_UNAVAILABLE: could not resolve the project slug (gstack-slug failed). Fix: run ./setup.`

**Meaning.** /design-consultation and /design-shotgun load your taste profile.
This says it could not be found, instead of acting as if you had none.

**Fix.** `cd <gstack checkout> && ./setup`.

<a id="design-variant-save-failed"></a>
### `cannot save paid image to <path>: <code> (<cause>). Image bytes were received; saved a recovery copy to <tmp path>. Fix: ...`

**Meaning.** The paid image generation succeeded but writing it to the output
path failed (disk, permissions, or every name through `-999` taken). gstack never
buys the same image twice and never overwrites an existing image.

**What is kept.** The image, at the printed recovery path in your temp directory.

**Fix.** Follow the printed fix (free disk space, make the folder writable, or
pick a new `--output`), then copy the recovery file to where you want it.

---

## Codex and other env-var hosts

<a id="gstack-no-install-found"></a>
### `gstack: no install found (tried <path>). Fix: ./setup --host <host> from your gstack checkout; ./setup --status shows it.`

**Meaning.** On Codex, Factory, OpenCode, Cursor, Copilot and Kiro every bash
block finds gstack on its own: an exported `GSTACK_ROOT` (with `bin/` and
`lib/`), then a repo-local install, then the host's global install
(`$CODEX_HOME/skills/gstack` on Codex). None existed.

**Fix.**

```bash
cd <gstack checkout> && ./setup --host codex   # or your host
./setup --status
```

**Expected result.** `./setup --status` lists the install and says the router is
a real file and its section links resolve.

<a id="setup-status-router-symlink"></a>
### `router is a symlink, which Codex skips` / `section links: N of M broken (first: ...)`

**Meaning.** `./setup --status` checks each registered install. Codex ignores a
symlinked SKILL.md, and a broken section link means a carved skill cannot load
its next step.

**Fix.** `cd <source> && ./setup --host <host>` (the command is printed).

<a id="setup-skill-copy-saved"></a>
### `saved your edited <path> to <backup> (setup rewrites gstack's SKILL.md copies on every run)`

**Meaning.** Installed router and nested SKILL.md files are now real copies,
rewritten by every setup. Your hand edit was saved first.

**What is kept.** Your edit, at `<backup>`. Move the customization into your own skill.

<a id="setup-skill-copy-backup-failed"></a>
### `error: could not back up an edited SKILL.md copy under <root>; the previous runtime root is unchanged`

**Fix.** Fix permissions on `<state root>/backups`, then `./setup --host <host>`.

<a id="upgrade-not-a-checkout"></a>
### `ERROR: <dir> is not a gstack checkout; nothing was changed. Re-run Step 2.` / `INSTALL_DIR is not set: re-run Step 2 ...`

**Meaning.** /gstack-upgrade now checks, before any git command, that it is
inside gstack's own checkout. A block ran without the path Step 2 printed, so it
stopped instead of touching your project.

**Fix.** Run Step 2 again and prefix the block with `INSTALL_DIR=<printed path>`.
On Windows (Git Bash) with `INSTALL_DIR` set correctly, older /gstack-upgrade
text compared two spellings of the same path and refused anyway; recover with
`cd <install dir> && git pull --ff-only --autostash && ./setup` (see
[the hook false positive](#setup-hook-does-not-parse)).

<a id="skill-over-size-limit"></a>
### `<host>/<skill>/SKILL.md is <bytes> bytes, over the 160,000-byte limit. Fix: carve sections with usesLazySections() for this skill.`

**Meaning.** For contributors: hosts read at most 160,000 bytes of one SKILL.md.
`bun run gen:skill-docs` fails in the repo and warns under `--install-root`.

---

## Setup and auto-update

<a id="bun-too-old"></a>
### `gstack needs Bun 1.3.3 or newer (1.4.2 recommended); found <version> at <path>. Nothing was installed or changed.`

**Meaning.** Bun older than 1.3.3 silently ignores the build flags that stop
gstack's compiled tools from reading a project's `.env`, so setup refuses it
before writing anything. The same link appears on two warnings that do not stop
setup: `warning: gstack is tested on Bun 1.4.2 (CI pin); found <version>` (1.3.3
up to 1.4.2 works but is untested) and `warning: could not read the Bun version
(...)` (setup continued; check `bun --version`).

**Fix.**

```bash
bun upgrade
./setup
```

**Expected result.** `bun --version` prints 1.4.2 or newer and setup finishes
with no Bun warning.

<a id="auto-update-bun-too-old"></a>
### `gstack auto-update: update held (bun-too-old: found Bun <version> at <path>; gstack <version> needs <floor> or newer); nothing was installed or changed. Fix now: ...`

**Meaning.** Team-mode auto-update fetched a release whose setup needs a newer
Bun than the one setup would run. It left your checkout and installed skills at
the current revision and prints this line once per session start. (An older
auto-updater running its first update cannot make this check.)

**Fix.** `bun upgrade`; the next session start resumes the update. To update
now: `bun upgrade && cd <gstack checkout> && git pull --ff-only && ./setup`.

<a id="bun-version-unreadable"></a>
### `bun-version-unreadable: could not read the version of Bun at <path> (bun --version printed '<output>'); gstack <version> needs <floor> or newer (BUN_VERSION_UNREADABLE)`

**Meaning.** Before moving the checkout, the auto-updater and `/gstack-upgrade`
compare the Bun that setup would run with the incoming release's security
floor. `bun --version` printed something that is not a version (shown, with
control characters removed), so the comparison could not run and the update was
held: nothing was installed or changed. `/gstack-upgrade` prints the same text
after `BUN_VERSION_UNREADABLE:`. Earlier releases read an unreadable version,
and every version under zsh, as "not below the floor" and went ahead (#3195).

**Fix.** Reinstall Bun; `bun upgrade` may not run on a broken install. In Git
Bash or a macOS/Linux terminal:

```bash
curl -fsSL https://bun.sh/install | bash
bun --version
```

**Expected result.** `bun --version` prints a version such as `1.4.2`, and the
next session start (or `/gstack-upgrade`) updates.

**Fixed in.** The first release after v1.91.101.0 (#3195).

<a id="auto-update-incomplete"></a>
### `gstack auto-update: setup did not finish (<reason>); installed skills may be out of date. gstack retries automatically. Fix now: cd <dir> && ./setup`

**Meaning.** The pull worked but setup (or migrations) failed. gstack no longer
says "just upgraded". It retries after 1 hour, then 6, then 24, and prints this
line once per session start. A `(bun not found on PATH)` reason means install
Bun first.

**What is kept.** The previous install stays active.

**Fix.** Run the printed command.

<a id="auto-update-pull-failed"></a>
### `gstack auto-update: git pull did not finish (exit N: ...); gstack is not updating. Fix now: ...`

**Fix.** `cd <gstack checkout> && git pull --ff-only && ./setup`.

<a id="setup-hook-does-not-parse"></a>
### `gstack setup: refusing to register hooks that do not parse (Claude Code would block tool calls with them): <file>:<line>: <error>`

**On Windows (Git Bash), from 1.91.31: a false positive.** If every
TypeScript hook fails with `bun could not bundle the TypeScript entry` (the
question-log, question-preference, auq-error-fallback and timeline-stop hooks,
`/autoplan`'s publication hook and `/plan-ceo-review`'s mode-handoff hook),
your hooks are fine. Git Bash handed Bun its paths as `C:/…` while the checker
looked them up as `/c/…` (#3088, #3100); the checker on main reads both
spellings. The same Git Bash spelling made `/gstack-upgrade` stop with
`ERROR: <dir> is not a gstack checkout; nothing was changed.` One recovery
covers both: update by hand, then run setup from the update.

```bash
cd ~/.claude/skills/gstack && git pull --ff-only --autostash && ./setup
```

Use your install directory if it is not `~/.claude/skills/gstack` (`./setup
--status` prints it). Expected result: setup finishes with exit 0 and no
refusal line, and later auto-updates go through.

**Meaning, everywhere else.** Claude Code runs gstack's hook shims through
`/bin/sh`, and a hook that does not parse exits 2, which blocks the tool call
it guards in every session. Setup parse-checks every hook it registers and
every hook a skill's frontmatter runs (`/autoplan`, `/careful`, `/freeze`,
`/guard`, `/investigate` and `/plan-ceo-review`): the shim, the gstack shell
helpers it sources (such as `careful/bin/hook-extract.sh` and
`bin/gstack-state-root.sh`), and the TypeScript it runs with its local imports.
A merge conflict marker line in any of those files fails as `unresolved merge
conflict marker`, even when the file still parses (markers inside a heredoc, a
string or a template literal do). The TypeScript is bundled from the gstack
checkout, so the `tsconfig.json` or `bunfig.toml` of the project you run it
from is never read. It registers the hooks that parse, skips the ones listed,
finishes the rest of the install, and exits non-zero. Claude Code runs hooks
straight from `~/.claude/skills/gstack`, so a skipped hook that an earlier
setup registered, or that a skill runs, keeps running the broken file until it
is fixed. This is a gstack bug, or a half-applied edit or merge in your
checkout: report the printed `<file>:<line>`.

**Fix.**

```bash
git -C ~/.claude/skills/gstack status   # half-applied edits or merge conflicts?
git -C ~/.claude/skills/gstack checkout -- <file>   # or finish the merge
cd ~/.claude/skills/gstack && ./setup
```

**Expected result.** Setup finishes with exit 0 and no refusal line.

<a id="auto-update-hook-does-not-parse"></a>
### `gstack auto-update: update held (hook-does-not-parse: <file>:<line>: <error>); nothing was installed or changed, and your current hooks keep running. ...`

**On Windows (Git Bash), from 1.91.31: a false positive.** If the held
reason is `<hook>.ts:1: bun could not bundle the TypeScript entry`, the
release is fine: your installed checker misread Git Bash's `C:/…` paths
(#3088, #3100), and the auto-updater checks every release with it, so it
holds every release until you update once by hand. Recovery (this also clears
`/gstack-upgrade`'s `is not a gstack checkout` refusal):

```bash
cd ~/.claude/skills/gstack && git pull --ff-only --autostash && ./setup
```

Use your install directory if it is not `~/.claude/skills/gstack`. Expected
result: setup finishes with exit 0, the next session start prints no held
line, and later updates install on their own.

**Meaning, everywhere else.** Team-mode auto-update fetched a release with a
hook that does not parse or still holds a merge conflict marker (the same
check setup runs). It checked the incoming revision before moving your
checkout, so your checkout, installed skills and registered hooks stay at the
current revision. The incoming release's own `bin/gstack-hook-check` decides,
so a checker bug in your install cannot hold later releases; your installed
checker decides only when the incoming one crashes, prints nothing or prints
a report it cannot verify. gstack checks again at the next update check and
installs the first release whose hooks parse. This is a gstack bug: report the
printed `<file>:<line>`.

**Fix.** Wait for the next release. A manual `git pull` followed by `./setup`
cannot be checked before the pull; setup then refuses the broken hook (see the
entry above).

<a id="auto-update-hook-check-unavailable"></a>
### `gstack auto-update: update held (hook-check-unavailable: <reason>); nothing was installed or changed, and your current hooks keep running. ... Fix now (in a terminal; Git Bash on Windows): cd '<dir>' && git fetch origin && bash bin/gstack-ff-update . '@{upstream}' && ./setup ...`

**Meaning.** Neither the incoming release's hook checker nor your installed
one gave a verified report on the incoming hooks (a crash, no output, an
unreadable report, or no Bun to bundle the TypeScript hooks), or the incoming
revision could not be extracted for the check (`cannot extract the incoming
revision: <git's error>`), so the auto-updater cannot tell whether moving your
checkout would break Claude Code tool calls. It left your checkout, skills and
hooks at the current revision. The `<reason>` names what each checker did.

**Fix.** Run the printed command. `bin/gstack-ff-update` moves the checkout
without losing a local edit (see
[shelved edits](#auto-update-rescued-edits)), and setup checks every hook it
registers and says what is wrong (for example that Bun is missing).

On Windows, if the reason is `git archive of the incoming revision failed`,
your updater predates the fix for #3184: see
[the held-install recovery](#auto-update-held-install-recovery).

<a id="auto-update-held-install-recovery"></a>
### `HELD hook-check-unavailable: git archive of the incoming revision failed` / `gstack auto-update: update held (hook-check-unavailable: git archive of the incoming revision failed) ...` / `gstack auto-update: setup did not finish (bun not found on PATH) ...` on Windows

**Meaning.** From 1.91.89.0 to the release that fixed #3184, the auto-updater
extracted each incoming release with `git archive | tar` before checking its
hooks. Git for Windows' MSYS `tar` cannot create the `connect-chrome` symlink
because it comes before its target in the archive, so every release was held
(`~/.gstack/analytics/session-update.log` shows the `HELD` line), and a stale
`setup did not finish (bun not found on PATH)` line could hide the hold. Your
installed updater cannot deliver its own fix, and the old `/gstack-upgrade`
can leave conflict markers when a local edit conflicts. The recovery fetches
the new `bin/gstack-ff-update` from the new revision into a private temp
directory and runs it. It works on a clean install, an install with local
edits that conflict, an install that already has unmerged files, and a
prefix-mode install: regenerable `SKILL.md` and `sections/*.md` edits are
re-rendered by setup, and every other edit is kept in a rescue ref (the
command prints it; see [shelved edits](#auto-update-rescued-edits)).

**Fix, in Git Bash** (use your install directory if it is not
`~/.claude/skills/gstack`):

<!-- form:recovery-gitbash -->
```bash
cd ~/.claude/skills/gstack && git fetch origin main && d=$(mktemp -d) && git show FETCH_HEAD:bin/gstack-ff-update > "$d/gstack-ff-update" && bash "$d/gstack-ff-update" . FETCH_HEAD; s=$?; rm -rf "$d"; [ "$s" = 0 ] && ./setup
```

**Fix, in Windows PowerShell 5.1** (it runs the same script through Git's
`bash.exe`, then `.\setup.ps1`):

<!-- form:recovery-powershell -->
```powershell
Set-Location -LiteralPath "$HOME\.claude\skills\gstack" -ErrorAction Stop; $gb = Join-Path (git --exec-path) '..\..\..\bin\bash.exe'; & $gb -c 'set -f; IFS=; git fetch origin main && d=$(mktemp -d) && git show FETCH_HEAD:bin/gstack-ff-update > $d/gstack-ff-update && bash $d/gstack-ff-update . FETCH_HEAD; s=$?; rm -rf -- $d; exit $s'; if ($LASTEXITCODE -eq 0) { .\setup.ps1 }
```

**In Claude Code**, ask it to run the Git Bash form above.

**Expected result.** The script prints `ok <old> <new>` or
`rescued <old> <new> refs/gstack/rescue/<oid> unmerged=<0|1>`, setup
finishes with exit 0, the next session start prints no held line, and later
updates install on their own.

**Trying an unreleased fix, and going back.** A fix branch can be tried
before it ships; auto-update pauses while a detached revision is checked out.
Replace `<branch>` with the branch named in the issue.

<!-- form:trial-gitbash -->
```bash
cd ~/.claude/skills/gstack && git checkout -- 'SKILL.md' '*/SKILL.md' '*/sections/*.md' && git fetch origin <branch> && git checkout --detach FETCH_HEAD && ./setup
```

<!-- form:trial-powershell -->
```powershell
Set-Location -LiteralPath "$HOME\.claude\skills\gstack" -ErrorAction Stop; $gb = Join-Path (git --exec-path) '..\..\..\bin\bash.exe'; & $gb -c 'set -f; git checkout -- SKILL.md */SKILL.md */sections/*.md && git fetch origin <branch> && git checkout --detach FETCH_HEAD'; if ($LASTEXITCODE -eq 0) { .\setup.ps1 }
```

To go back to the released version (this also resumes auto-update):

<!-- form:goback-gitbash -->
```bash
cd ~/.claude/skills/gstack && git checkout -- 'SKILL.md' '*/SKILL.md' '*/sections/*.md' && git checkout main && ./setup
```

<!-- form:goback-powershell -->
```powershell
Set-Location -LiteralPath "$HOME\.claude\skills\gstack" -ErrorAction Stop; $gb = Join-Path (git --exec-path) '..\..\..\bin\bash.exe'; & $gb -c 'set -f; git checkout -- SKILL.md */SKILL.md */sections/*.md && git checkout main'; if ($LASTEXITCODE -eq 0) { .\setup.ps1 }
```

<a id="auto-update-unmerged-files"></a>
### `gstack auto-update: update held (unmerged-files: <n> unmerged file(s) in the install (first: <path>)); an earlier merge, rebase or stash pop left conflicts in the install, and an update would bury them. Fix now (...): cd '<dir>' && git fetch origin && bash bin/gstack-ff-update . '@{upstream}' && ./setup ...`

**Meaning.** Your gstack checkout has unmerged files: conflict markers from a
merge, rebase or `git stash pop` of your own, or from an auto-updater older
than the fix for this (its `merge --autostash` left markers in place when a
local edit conflicted). The background updater never moves a checkout with
unmerged files, and it prints no "setup did not finish" fix while they exist,
because setup would run over the markers.

**Fix.** Run the printed command. It saves everything first, the unmerged
files included, in a rescue ref labelled "needs manual resolution", then
moves the checkout to the release and runs setup. Read the rescue with the
commands under [shelved edits](#auto-update-rescued-edits). To resolve the
conflict yourself instead, finish or abort your merge (`git -C '<dir>' merge
--abort`, `git -C '<dir>' checkout -- <file>`); gstack retries at the next
check.

<a id="auto-update-autostash-unrecoverable"></a>
### `gstack auto-update: update held (autostash-unrecoverable: <reason>); your local edits are where they were and nothing was installed. Look first: git -C '<dir>' status --short. Fix now (...)` / `autostash-unrecoverable: <reason>`

**Meaning.** `bin/gstack-ff-update` refused to move the checkout and changed
nothing. The `<reason>` says why: an untracked file is where the release
puts a tracked one (`git refused to update ...: would be overwritten`), a
file changed while the update ran, another git command held the index lock
(`index.lock exists`), or a rescue ref of that name already names another
commit.

**Fix.** Run the `status` command the line prints, move the listed untracked
file out of the way (or wait for the other git command to finish), then run
the printed `Fix now` command. Nothing needs restoring: your edits are still
in the working tree.

<a id="auto-update-rescued-edits"></a>
### `gstack auto-update: your local edits in the install (<files>) conflicted with an update, so they were saved in refs/gstack/rescue/<oid> and the install runs the update. ...` / `rescued <old> <new> refs/gstack/rescue/<oid> unmerged=<0|1>`

**Meaning.** You had edited tracked files in your gstack checkout, and the
release changed the same lines (or you had staged changes or unmerged files).
Instead of leaving conflict markers in the checkout Claude Code runs hooks
from, `bin/gstack-ff-update` saved your edits as one commit,
`refs/gstack/rescue/<oid>`, and moved the checkout to the release. The
rescue's first parent is the revision you had, so it holds only your changes;
its second parent holds what you had staged. Edits that did not conflict stay
in place, and regenerable `SKILL.md` and `sections/*.md` edits (skill prefix,
gbrain blocks) are re-rendered by setup instead of being rescued. The
session-start line repeats once a day until you delete the ref.

**Fix.** Inspect first:

```bash
git -C ~/.claude/skills/gstack show --stat 'refs/gstack/rescue/<oid>'
```

To keep your edits, export only your changes and apply them in a scratch
checkout (never with `stash apply` in the install):

```bash
git -C ~/.claude/skills/gstack diff 'refs/gstack/rescue/<oid>^' 'refs/gstack/rescue/<oid>' > ~/gstack-local-edits.patch
git clone https://github.com/garrytan/gstack.git ~/gstack-scratch && cd ~/gstack-scratch && git apply -3 ~/gstack-local-edits.patch
```

A rescue labelled "needs manual resolution" holds files that were already
unmerged: their content can contain conflict markers to resolve. Delete the
ref when you are done (this also stops the daily line):

```bash
git -C ~/.claude/skills/gstack update-ref -d 'refs/gstack/rescue/<oid>'
```

<a id="setup-runtime-root-contains-checkout"></a>
### `gstack setup: refusing to replace <root> for <host>: this runtime directory contains the source checkout setup runs from (<checkout>), so replacing it would delete the checkout. Nothing was changed.`

**Meaning.** Setup installs Codex, Factory, OpenCode, Cursor, Copilot and
Antigravity by building a runtime root (such as `~/.cursor/skills/gstack`) and
swapping it in for the old one, and Kiro by writing into `~/.kiro/skills/gstack`.
Your gstack checkout lives at that root or inside it, so the swap would delete
the checkout (#3084), and Kiro would link the checkout into itself. Setup refuses before
writing anything. `./setup --status` and `gstack-doctor` suggest the move for
that host instead of `./setup --host <host>`.

**Fix.** Move the checkout out, then run setup from its new place. Setup
prints the exact commands. When `~/.claude/skills/gstack` is a symlink to the
checkout, the checkout takes the symlink's place:

```bash
rm ~/.claude/skills/gstack && mv ~/.cursor/skills/gstack ~/.claude/skills/gstack
cd ~/.claude/skills/gstack && ./setup --host claude && ./setup --host cursor
```

Otherwise move it anywhere outside the host's skills directory:

```bash
mv ~/.cursor/skills/gstack ~/gstack && cd ~/gstack && ./setup --host cursor
```

**Expected result.** Both setups finish with exit 0, and `./setup --status`
lists each host as `current`.

<a id="host-renders-pruned"></a>
### `pruned <dir> (<host> is not installed from this checkout): ...` / `kept <path>: not proven generated (...)` / `host-render backup: <dir> (...)`

**Meaning.** A gstack checkout keeps skills only for the agents installed from
it, listed in `.gstack-installed-hosts` in the checkout (#1694). Older installs
rendered every agent's copy, so a global Claude install carried 632 `SKILL.md`
files (34.7 MB) that Claude Code and Cursor-agent scan. setup removed the copy
for an agent that is not installed from this checkout. Generated files were
moved to the backup directory it printed; links into the checkout were removed;
files it could not prove gstack generated (`kept ...`) were left in place.
`prune.log` in the backup lists every path. The same prune runs once from the
upgrade migration. Agents in the record are never pruned.

**Fix.** Nothing, if you don't use that agent. To get an agent back, install
it from this checkout, which records it and renders its skills:

```bash
./setup --host <name>
```

For an instruction-only agent you render by hand (Hermes, OpenClaw, GBrain),
add its name to `.gstack-installed-hosts` first, then run
`bun run gen:skill-docs --host <name>`. To restore one file, `mv` it back from
the backup. A `kept` file is yours: move or delete it when you no longer need it.
The backup sits in gstack's state root, which no agent scans; delete it once
you are sure you don't need it (about 36 MB for a pre-1.91.65 Claude install).

**Expected result.** The next `./setup` prints no `pruned` line, and
`./setup --status` lists the agents you use.

<a id="cso-windows-msvc-compile"></a>
### `CSO unavailable: its native helper was not built (windows-msvc-compile)`

**Meaning.** Visual Studio's compiler was found but the /cso native helper did
not compile. setup prints the first compiler error. It used to say "install
Visual Studio".

**Fix.** Fix the printed compiler error, then re-run `./setup`.

<a id="cso-build-or-publish-failed"></a>
### `CSO unavailable: the native helper's <stage> step failed (...)` / `CSO publish step failed (...) for <revision>; previous CSO kept: <revision>`

**Meaning.** The /cso native helper is optional. Its build prerequisites were
present, but the `build` step (compiling the helper) or the `publish` step
(swapping the new helper into `bin/` under a lock) failed. setup used to stop
here (#3071); now it finishes everything else and says which step failed. When
an earlier helper was installed and the failed publish restored it, setup
prints `previous CSO kept` and /cso keeps using that helper; otherwise /cso
reports `not assessed`. `interrupted` means the step was killed before it could
record a result. The outcome is in `bin/.gstack-cso-build-result`, and
`gstack-doctor`'s `cso` row reads the same record. The build output is in
`bin/.gstack-cso-build.log`.

**Fix.** Read the log, fix what it reports, then retry from your gstack checkout:

```bash
bun run build:cso && ./setup
```

On Windows, setup and the build use PowerShell 7 (`pwsh`) when it is installed
and fall back to Windows PowerShell 5.1. The root cause of the staged files
vanishing during publish in #3071 is still unknown; attach the log there if you
hit it. CI sets `GSTACK_STRICT_BUILD=1`, which makes these failures fatal so
build regressions cannot hide.

**Expected result.** setup prints no CSO line, and the doctor's `cso` row is
`ok`.

<a id="cso-windows-docker"></a>
### `Docker found at <path>, but native Windows Docker transport is not supported yet; static assessment only.` / `docker.exe at <path> is outside the trusted install locations (...)`

**Meaning.** On Windows, /cso looks for `docker.exe` only under the install
folders Windows reports for Program Files, Program Files (x86) and the Windows
directory, by its real path, with no symlink or junction on the way. A
user-writable directory is untrusted, because the Docker child carries
registry credentials; that refusal cannot be overridden.

Even a trusted `docker.exe` cannot run /cso's isolated containers yet: /cso
admits only a local Unix Docker socket, and Docker Desktop on Windows speaks
over a named pipe. /cso reports this and runs its static assessment only; no
container or runtime check runs.

**Fix.** For runtime checks, run /cso from Linux or macOS (WSL2 counts as
Linux) with a local Docker socket. On Windows, static assessment is the
supported mode; if the refusal named a user directory, install Docker Desktop
under Program Files.

<a id="cso-capacity"></a>
### `Snapshot manifest cap exceeded: ...` / `64 MiB source cap exceeded: ...` / `Symlink or special source file: <path>`

**Meaning.** /cso copies the repository into a private snapshot before any
audit starts, and refuses the whole run when the snapshot would be incomplete
or too large. Each message names the cap that applied:

- **Snapshot manifest cap (16 MiB).** One entry per tracked or nonignored
  untracked file; about 50,000 files fit.
- **64 MiB source cap.** The full size of every such file outside dependency
  and VCS directories counts, including files over 1 MiB whose contents are
  withheld from the audit.
- **Symlinks.** A tracked symlink anywhere in the repository stops the run.

**Fix.** No setting raises these caps. For the 64 MiB source cap, rerun with
`--paths` set to the comma-separated repo-relative directories you want audited
(for example `--paths src/core,src/mcp`). Paths outside them are never
captured or assessed and do not count toward the cap; snapshot and history
coverage then read **partial**, the report counts every skipped path, and the run's
snapshot manifest lists each one, so the verdict says what was not audited.
With `--diff`, every changed path outside dependency directories must be inside
`--paths`, or the run is refused. Do not audit a hand-trimmed copy: /cso would treat it as the whole
repository and report nothing as skipped. `--paths` does not lower the
manifest cap or the 100,000-entry limit, because every skipped path still has a
manifest entry (about 50,000 files fit). Symlinks must be removed. Add your
file count or size to
[#2993](https://github.com/garrytan/gstack/issues/2993).

<a id="cso-scanner-invalid-output"></a>
### `INVALID_OUTPUT: Scanner report is malformed, unsupported, or exceeds structural limits.` (Semgrep on a real repository)

**Meaning.** Before the first release after v1.91.101.0, /cso redacted a
scanner's JSON report by splicing an unquoted `<REDACTED-...>` marker over any
bare number that looked like a phone number or card number, such as Semgrep's
`"max_memory_bytes":1145427776` or an epoch timestamp. The report then failed to
parse and the scanner was recorded as not assessed (#3185). Now a redacted
number becomes the quoted string `"<REDACTED-...>"` and the report parses. A
redaction that would cross JSON tokens still withholds the payload
(`REDACTION_FAILED`).

**Fix.** Update gstack (`/gstack-upgrade`), then run /cso again. If this code
still appears, the scanner itself emitted malformed JSON; report the scanner
and version at https://github.com/garrytan/gstack/issues.

**Fixed in.** The first release after v1.91.101.0 (#3185).

<a id="cso-orbstack-argv0"></a>
### `unsupported argv0 "docker-tools"` (OrbStack's `docker` under /cso)

**Meaning.** /cso runs the canonical path of `docker` (symlinks resolved), and
OrbStack's `docker` is a symlink to one multicall binary, `docker-tools`, that
decides what to be from the name it was started as. Started under its real name
it refused, so Docker isolation and every scanner were reported missing
(#3187). /cso now starts the same verified binary with the name `docker`,
including in its cleanup watchdog.

**Fix.** Update gstack (`/gstack-upgrade`), then run `gstack-doctor`; its `cso`
row should pass with OrbStack running.

**Fixed in.** The first release after v1.91.101.0 (#3187).

<a id="conductor-auq-hook-removed"></a>
### `removed the AskUserQuestion preference hook: it breaks Conductor's native AskUserQuestion (#2207). ...`

**Meaning.** In Conductor, setup no longer installs the plan-tune
question-preference hook and removes one it added before. The other plan-tune
hooks stay.

**Fix.** To keep it anyway: `gstack-config set plan_tune_hooks yes`, then `./setup`.

<a id="browse-extension-id-invalid"></a>
### `Error: browse_extension_id '<v>' is not a Chrome extension ID ... Existing value left unchanged.`

**Fix.** Copy the 32-letter ID (letters a to p) from `chrome://extensions`, then
`gstack-config set browse_extension_id <id>`.

---

## Install check (`gstack-doctor --check`) and the Capy installer

`gstack-doctor --check` prints one `PASS | FAIL | SKIP <id>` row per component
and ends with `gstack: ok <revision> for=<workflow>` (exit 0) or
`gstack: fail <id,id>` (exit 1). Every FAIL row carries a `fix:` clause and one
of the codes below. Read the trailer directly; never pipe `--check` through
`tail` or another command whose exit status would replace the doctor's
(docs/capy-install.md).

<a id="doctor-component-missing"></a>
### `FAIL <id> — <detail>; fix: <command> (COMPONENT_MISSING; ...)`

**Meaning.** A component the selected workflow needs (`--for <skill>`,
`--require <csv>`, or by default every host profile installed from this
checkout) is not installed, not built, not current, or not authenticated. The
row names it: `claude` or `codex` (a host profile missing or stale), `patch`
(the Codex render lacks the model behavioral patch), `codex-cli` (the Codex CLI
is required and absent or not logged in), `browse-bundle`, `browser` (Chromium
does not launch or render), `cso` (the native helper is required and not
built).

**Fix.** Run the command in the row's `fix:` clause. For `browser`, that is
`<checkout>/bin/gstack-browser-ensure`, which installs Chromium on first use
when the installer skipped it (`SKIP browser (lazy; ...)`).

**Expected result.** The row turns `PASS` and the trailer reads `gstack: ok`.

<a id="doctor-runtime-below-minimum"></a>
### `FAIL runtime — bun <version> ... (RUNTIME_BELOW_MINIMUM; ...)`

**Meaning.** The Bun on `PATH` is absent, below gstack's security floor
(1.3.3: older Bun ignores the no-autoload compile flags, see
[bun-too-old](#bun-too-old)) or below the supported minimum (1.4.2, the CI pin
and `engines.bun`). The dashboard (`gstack-doctor` without `--check`) warns on
an untested version; `--check` fails it, because a gate run on an untested
runtime is the incident this check exists for. The default Capy cloud image
ships 1.3.14, so a fresh Capy machine fails here until the installer upgrades
Bun.

**Fix.** `bin/gstack-capy-install` upgrades Bun through setup's
checksum-verified recipe before running `./setup`. By hand: download
`https://bun.sh/install`, verify its SHA-256 against `GSTACK_BUN_INSTALL_SHA`
in `bin/gstack-bun-version.sh`, then `BUN_VERSION=1.4.2 bash <file>` and
re-run `./setup`.

<a id="doctor-project-pin-mismatch"></a>
### `FAIL pins — bun <version> outside engines.bun >=1.4.2 (package.json:<line>; ...) (PROJECT_PIN_MISMATCH; ...)`

**Meaning.** The target project (`--project <path>`, default the git toplevel
of the current directory, never the gstack checkout) pins a Bun or Node
version the running one does not satisfy. Pins come from `package.json`
(`packageManager`, `engines`), `.tool-versions`, `.nvmrc`, `.bun-version` and
`bun-version:` / `node-version:` lines in `.github/workflows/*.yml`. A range
(`>=1.4.2`) and an exact pin are told apart, and a CI pin keeps its platform
lane: a Windows job's pin never fails a Linux run. The dashboard warns; `--check`
fails. The row is `SKIP pins (no bun to evaluate the project pins)` when Bun
is absent, never silent.

**Fix.** Install the pinned version for this platform (the row names each
constraint with its source), or change the project's pin. On Capy the row's
fix is the exact bootstrapper command, `bash <skill>/scripts/install.sh`
(the same command without `--check`): it installs the pinned Bun when the pin
names a verified version and ends `gstack: ok`, or stops with
`RUNTIME_PIN_CONFLICT` naming the pin to raise.

<a id="doctor-revision-unmet"></a>
### `FAIL revision — installed <version> (requested <ref>) (REVISION_UNMET; ...)`

**Meaning.** `--revision <ref>` asked the doctor to certify a specific gstack
revision (a VERSION string, tag, branch or commit) and the checkout is at
another. An unmet revision is never `ok`.

**Fix.** Move the checkout: `<checkout>/bin/gstack-upgrade` (the tip of the default
branch; `/gstack-upgrade` interactively), or
`git -C <checkout> fetch origin && git -C <checkout> checkout <ref> && ./setup`.
`bin/gstack-capy-install --revision <ref>` never moves an existing checkout; it
reports `gstack: ok <installed> (requested <ref>; run <checkout>/bin/gstack-upgrade to move)`.

<a id="capy-install-runtime-conflict"></a>
### `gstack-capy-install: Bun conflict: gstack needs >=<minimum>, <project> pins <constraint> (RUNTIME_PIN_CONFLICT; ...)`

**Meaning.** The installer installs one verified Bun archive: gstack's
supported minimum, or the project's exact pin when that pin is above the
minimum and listed in the message's `verified archives:`. Here the two do not
meet (for example the project pins `bun@1.3.14`, or a version gstack has no
verified archive for), so the installer changed nothing and stopped before
`./setup`.

**Fix.** Pin a verified version in the project, upgrade gstack to a release
that verifies the pinned version, or install gstack on a machine whose Bun the
project accepts. `--project <path>` names
the project whose pins apply.

<a id="browser-ensure-failed"></a>
### `gstack-browser-ensure: NEEDS_SETUP ... (BROWSER_UNAVAILABLE; ...)`

**Meaning.** The first browser skill run on a machine installed without
Chromium (`SKIP browser (lazy; gstack-browser-ensure installs on first use)`)
tried to install it through `bun x playwright install chromium` under setup's
lock, or Chromium is installed but does not launch.

**Fix.** Read the installer output above: offline or proxied machines need
network access to the Playwright CDN; on Ubuntu 24.04+ an AppArmor
user-namespace error needs `GSTACK_CHROMIUM_NO_SANDBOX=1`; then re-run
`<checkout>/bin/gstack-browser-ensure`. `--with-browser` on the installer
front-loads the install on machines that want it now.

<a id="capy-install-preflight-failed"></a>
### `gstack-capy-install: preflight: <tool> not found (INSTALL_PREFLIGHT_FAILED; ...)`

**Meaning.** The installer checks `git`, `curl`, `node` and `jq` before
`./setup`, and installs Bun when it is absent or below the supported minimum.
One of them is missing, or the Bun install script's checksum did not match
`GSTACK_BUN_INSTALL_SHA` (the download is discarded, nothing runs).

**Fix.** Install the named tool (`apt-get install -y jq`, Node from nodejs.org
or nvm), then re-run `bin/gstack-capy-install`. A checksum mismatch means the
upstream installer changed: update `GSTACK_BUN_INSTALL_SHA` only after
reviewing the new script.

<a id="upgrade-refused"></a>
### `gstack-upgrade: <cause>; nothing was changed; fix: <command> (UPGRADE_REFUSED)`

**Meaning.** `bin/gstack-upgrade` moves a checkout only by fast-forward to the
tip of its remote default branch. It refused before changing anything: the
directory is not a gstack checkout, HEAD is detached or on another branch (a
pin), a tracked file is modified, a local commit is not on the remote branch,
the incoming release's Bun floor is above the Bun on PATH, or another updater
holds `<state root>/.setup-lock`. It never stashes, resets or discards.

**Fix.** Resolve the named cause with the printed command (commit or move the
listed changes, check out the default branch, move local commits to another
branch), then re-run `bin/gstack-upgrade`. A reinstall that failed after the
fast-forward is completed by the next run (`reinstall pending from <version>`).

<a id="upgrade-busy"></a>
### `gstack-upgrade: live gstack sessions hold this installation: pid <p> (<age>m), ...; nothing was changed; fix: ... (UPGRADE_BUSY)`

**Meaning.** Several agents share this checkout (Capy subagents on one
machine, say). Each session start writes a workflow lease,
`<git dir>/gstack-leases/<harness pid>` (`bin/gstack-lease touch`, from
`bin/gstack-skill-start`), and `bin/gstack-upgrade` refused before changing
anything because a lease whose pid is alive and not in its own process
ancestry exists: fast-forwarding would change gstack under a session
mid-workflow. Leases older than 120 minutes are pruned; a lease whose
process has exited never blocks, and neither does a stale one: each lease
records its process's start identity, so a pid reused after a reboot or a
machine wake (GBRA-105's lease named pid 379, which had become dbus-daemon)
is reclaimed instead of blocking. The upgrader's own session (the pid chain it
runs under) never counts.

**Fix.** Wait for those sessions to finish (`bin/gstack-lease list` shows
every lease with its age and `alive|dead|stale`; a holder is named as
`pid <p> (<age>m <command>)`), then re-run `bin/gstack-upgrade`.
When you know they are idle, `GSTACK_UPGRADE_FORCE=1 bin/gstack-upgrade`
proceeds. At a Capy session start the same refusal appears as
`SELF_UPGRADE: skipped (live gstack sessions hold this installation: ...)`,
and the trailer is `gstack: fail behind — … (UPGRADE_BUSY)`: a session that
could not upgrade is never certified ok.

<a id="upgrade-fetch-failed"></a>
### `gstack-upgrade: could not reach origin (...) (UPGRADE_FETCH_FAILED)`

**Meaning.** The remote default branch could not be listed or fetched (offline,
proxy, credentials), so `--check` cannot say whether the checkout is current.
It never reports `current` without the fetch.

**Fix.** Check network access to the checkout's origin
(`git -C <checkout> remote -v`), then re-run.

<a id="revision-below-minimum"></a>
### `gstack: fail revision — installed <v> is below the supported minimum <m> (<cause>); fix: ... (REVISION_BELOW_MINIMUM)`

**Meaning.** `capy/support.env` on the remote default branch declares the
oldest revision whose installer, trailer and fix lines are honest
(`GSTACK_MIN_REVISION`), and this checkout is older. The Capy skill
bootstrapper reads it from `FETCH_HEAD`, so even a checkout that predates the
file learns it. `--check` only reports (`fast-forward available`); install
mode fast-forwards a clean, unpinned checkout, reinstalls and rechecks under
one lock. The cause names why nothing moved: `pinned by --revision`, `pinned:
HEAD is detached`, `tracked files changed: <files>`, `diverged: ...` or
`auto-upgrade disabled` (`GSTACK_CAPY_AUTO_UPGRADE=0`). `gstack-doctor --check
--min-revision <m>` fails the revision row the same way.

**Fix.** Run the fix clause: the bootstrapper without `--check`, or
`<checkout>/bin/gstack-upgrade`. For a pin, drop `--revision` or pin a
revision at or above the minimum. An interrupted install after the
fast-forward leaves the trailer `fail`; the next install run completes it.

<a id="capy-wrapper-stale"></a>
### `FAIL wrapper — ... (CAPY_WRAPPER_STALE)` / `WARN wrapper — ...; owner action: ...` / `gstack-capy-skill: owner action — Drive copy is wrapper <n>, minimum <m>; ...`

**Meaning.** The Capy skill folder is older than the checkout's
`GSTACK_CAPY_MIN_WRAPPER` (`capy/support.env`). The doctor's `wrapper` row
decides by the active wrapper's provenance (`GSTACK_CAPY_WRAPPER_REV` and
`GSTACK_CAPY_WRAPPER_PATH`, exported by the bootstrapper): a current active
wrapper passes, and a stale Drive copy elsewhere is a `WARN` row, an owner
action that never fails the run. Without provenance (a direct
`gstack-doctor --check`, or a pre-bootstrapper copy with no
`GSTACK_CAPY_WRAPPER=` line, which reads as wrapper 0) it reads the Drive
copies (`~/.capy/drive/*/skills/gstack/scripts/install.sh`, or only
`GSTACK_CAPY_WRAPPER_PATH` when set) and fails only when every copy is stale,
listing each with its revision. A stale active wrapper is a `WARN` too: an
older copy still works (`capy/support.env`). `bin/gstack-upgrade` runs the
installer with the checkout's own copy as the active wrapper and never leaves
a pending reinstall when the wrapper row is the only failure.

**Fix.** This session: run the checkout's own copy,
`bash <checkout>/capy/skill/gstack/scripts/install.sh --check --for <skill>`;
it carries current provenance, so it certifies with the stale Drive copy left
unchanged. Owner: copy `<checkout>/capy/skill/gstack/` over the Drive skill
folder (on Capy, the user-scope Drive `skills/gstack/`), or have Capy re-sync
it. The message recurs every session until the Drive copy changes. Agents never
write the skill folder.

<a id="bun-resolution-drift"></a>
### `FAIL runtime — bun resolution drifted: recorded bun <v> at <path> (<rule>), now <current>; changed: <what>; fix: ... (BUN_RESOLUTION_DRIFT)`

**Meaning.** Install and `--check` resolve Bun through one contract
(`gstack_bun_resolve` in `bin/gstack-bun-version.sh`, twinned by `resolveBun`
in `lib/pregate/runtime.ts`): the project's exact pin and gstack's install
default in the runtime store (`<state root>/runtimes/bun/<version>/bun`),
`$BUN_INSTALL/bin`, `~/.bun/bin`, then PATH; the first Bun that satisfies
gstack's minimum and every project pin wins. Install records the pick in the
install verdict for this checkout and project (`bun_path`, `bun_version`,
`bun_rule`). The recorded Bun is gone, reports another version (replaced in
place), or no longer satisfies gstack's minimum and the project's pins. A
different candidate that would now resolve first (a store Bun another
project's install published, a changed `BUN_INSTALL`) is not drift: `--check`
keeps the recorded Bun, prints `note: the recorded bun ... stays certified`
and names the installer run that records the new pick. The pregate's lanes and
guards (`lib/pregate/runtime.ts`) and the workflow start refuse with this code
when the Bun the verdict recorded is gone or changed.

**Fix.** Run the row's fix: the installer, which records the current pick, or,
when nothing eligible remains, re-downloads a verified Bun into the store. The
next `--check` passes.

<a id="bun-install-version-invalid"></a>
### `gstack-capy-install: GSTACK_BUN_INSTALL_VERSION=<v> is not a verified Bun at or above gstack's supported minimum ...; fix: ... (BUN_INSTALL_VERSION_INVALID)`

**Meaning.** `GSTACK_BUN_INSTALL_VERSION` overrides the Bun the installer
downloads when no exact project pin decides (`GSTACK_BUN_DEFAULT`, 1.4.4). It
must be listed in `GSTACK_BUN_VERIFIED` (a SHA-256-verified archive) and sit at
or above the supported minimum (`GSTACK_BUN_TESTED`). Nothing was installed.

**Fix.** Unset the variable, or set it to one of the verified versions the
message lists.

<a id="install-unverified"></a>
### `INSTALL: fail verdict — <detail>; fix: ... (INSTALL_UNVERIFIED)`

**Meaning.** On a Capy machine (`GSTACK_CAPY=1`, set by the `GSTACK_LAUNCH`
line), an unattended or spawned workflow starts only with a passing install
verdict (`<state root>/install-verdicts/<sha256 of the checkout path>/<sha256
of the project directory, or none>.json`, named as `GSTACK_INSTALL_VERDICT`)
for this checkout, its current HEAD and a
workflow at least as wide as the one starting: a verdict for `--for autoplan`
does not cover `qa`'s browser, and a planning-only pins SKIP does not cover a
workflow that runs the repo's tests. `gstack-skill-start` printed this row and
`GSTACK_RESULT: skill=<s> status=refused run=-`, exit 3. The same start refuses
an unattended run whose Bun on PATH is below the supported minimum
(`INSTALL: fail runtime ... (RUNTIME_BELOW_MINIMUM)`) on any host.

**Fix.** Run the Capy skill installer (`scripts/install.sh --for <workflow>`)
from the project directory the workflow will run in, since the verdict is
keyed by that directory (GSTA-85), and launch with the `GSTACK_LAUNCH` line it
prints. A verdict file that exists but cannot be read (`the install verdict at
<file> is unreadable or has an unsupported schema_version`) is repaired the
same way, by rerunning the installer.
`GSTACK_ALLOW_UNSUPPORTED_RUNTIME=1` admits anyway (printed as
`INSTALL_VERDICT: overridden`); record it as a deviation.

---

## Capy: approvals, Captain briefs and PR screenshots

These come from the commands gstack's Capy adaptations add: `gstack-approvals` (the
per-thread approval record), `gstack-owner-brief render --captain` (the plan ask in
the before/after shape) and `gstack-pr-shots` (before/after images for a PR body).
The guide is `capy/skill/gstack/captain.md`.

<a id="approval-record-invalid"></a>
### `gstack-approvals: ... (APPROVAL_RECORD_INVALID)`

**Meaning.** A row is missing a required field (`--ask`, `--words`, `--scope`,
`--by`), holds a value outside its enum (`--outcome approved|rejected|pending|standing`,
a `--date` that is not a real `YYYY-MM-DD` day) or exceeds a length cap (ask, scope and
pending 300 characters, words 2,000). Exit 2. Nothing was written.

**Fix.** Rerun with every required flag inside the caps the line names.

<a id="approval-record-secret"></a>
### `gstack-approvals: ... (APPROVAL_RECORD_SECRET)`

**Meaning.** A field matched gstack's secret scanner (the same one the push guard
uses). The line names the field and the detector rule, never the matched text. Exit 3.
Nothing was written, locally or to the Drive mirror.

**Fix.** Record the words with the secret replaced by `[redacted]`, or ask the person to
restate them. Rotate the secret if it was real.

<a id="approval-record-no-branch"></a>
### `gstack-approvals: ... (APPROVAL_RECORD_NO_BRANCH)`

**Meaning.** The record is kept per branch (one Capy thread ships one branch), and
HEAD is detached or the working directory is not a git repository. Exit 3.

**Fix.** Check out the branch the work ships from, or pass `--branch <name>`.

<a id="approval-record-unavailable"></a>
### `gstack-approvals: ... (APPROVAL_RECORD_UNAVAILABLE)`

**Meaning.** There is no record on this machine, the state root is ephemeral (a Capy
machine), and no Drive mirror could be resolved, so "no approvals" cannot be told apart
from "the record was lost with the old machine". `render` still prints the section, with
"Record unavailable on this machine" instead of "No approvals recorded". Exit 1.

**Fix.** Run where the record lives, copy the rows back from the thread's report, or make
the private Drive mirror resolvable (one `~/.capy/drive/project-user-*` folder, or
`GSTACK_APPROVALS_DIR`).

<a id="approval-record-write-failed"></a>
### `gstack-approvals: ... (APPROVAL_RECORD_WRITE_FAILED)`

**Meaning.** The local record or its Drive mirror could not be written; the line names
the path and the error. A failed local append wrote nothing. A failed mirror write
leaves the local row in place. Exit 1.

**Fix.** Make the named directory writable, then rerun `gstack-approvals sync` to mirror again.

<a id="approval-import-unanswered"></a>
### `gstack-approvals import: ... (APPROVAL_IMPORT_UNANSWERED)`

**Meaning.** The autoplan run has no answered gate (every decision is still pending),
so there is nothing to import. Exit 3.

**Fix.** Answer the gate (`gstack-autoplan answer ... --by human|agent:<id>`), then
import again. Imports are idempotent, so a retry never records an answer twice.

<a id="captain-brief-incomplete"></a>
### `gstack-owner-brief render --captain: ... (CAPTAIN_BRIEF_INCOMPLETE)`

**Meaning.** The plan is missing at least one section the brief needs: `## Before → after`,
`## Why it matters`, `## What caused this work`, `## Big decisions`. The brief still prints,
but it opens with "Not ready for approval" and has no reply invitation. Exit 1.

**Fix.** Add the named sections to the plan (`gstack-autoplan revise --plan <file>` if
the run is reviewing it) and render again. `--allow-incomplete` exits 0 for a preview,
but the text still says it is not ready.

<a id="pr-shots-input-not-found"></a>
### `gstack-pr-shots: ... (PR_SHOTS_INPUT_NOT_FOUND)`

**Meaning.** An input is missing: a `--before/--after` file, the `--base` ref, the
`--path` at both the base and the working tree, or the `--heading` on both sides. Exit 3.

**Fix.** Check the ref, path or heading named on the line.

<a id="pr-shots-input-refused"></a>
### `gstack-pr-shots: ... (PR_SHOTS_INPUT_REFUSED)`

**Meaning.** An input was refused before anything was rendered, because PR images
are public. It matched the secret scanner (the line names the side, line and rule),
is binary, exceeds 512 KiB, lies outside the repository and the state root, or names a
ref starting with `-`. Exit 3.

**Fix.** Take the secret out of the capture, or picture a tracked text file.

<a id="pr-shots-identical"></a>
### `gstack-pr-shots: ... (PR_SHOTS_IDENTICAL)`

**Meaning.** Before and after are the same text, so there is no change to picture. Exit 1.

**Fix.** Picture a file or section this branch changed (`git diff --stat origin/<base>...HEAD`).

<a id="pr-shots-render-failed"></a>
### `gstack-pr-shots: ... (PR_SHOTS_RENDER_FAILED)`

**Meaning.** A browser was available but rendering `shot.html` failed; the line names the
renderer's error. `shot.html` and `text.md` are still written. Exit 1. With no browser at
all the command prints `SHOT_PNG: unavailable (...)` and exits 0 instead.

**Fix.** Screenshot `shot.html` with your own browser at 880 px wide, or use `text.md`.

## Browser

<a id="browse-runtime-version-skew"></a>
### `[browse] this install's browse CLI (<root>, build <hash>) and the gstack checkout's server bundle (<checkout>, build <hash>) are from different builds, so the server was not started. ...`

**Meaning.** On Windows a host runtime root (`~/.codex/skills/gstack` and the
other env-var hosts) holds a copy of browse with no `node_modules`, so its CLI
starts the server bundle in the gstack checkout recorded in `.source-path`.
The checkout was rebuilt (or updated) without refreshing this runtime root, so
the two builds differ and browse refuses rather than run a mismatched server.

**Fix.** Re-run setup from the checkout named in the message; it rebuilds and
refreshes every runtime root:

```bash
cd <checkout> && ./setup
```

<a id="browse-chain-no-flow"></a>
### `[browse] chain: no flow to run (stdin was empty)` (or `stdin is a terminal`, `stdin could not be read (EAGAIN)`)

**Meaning.** `browse chain` with no arguments runs the JSON flow piped to it.
Nothing arrived, so it exits 1 before starting a browser. It used to exit 0 on
Windows having run nothing.

**Fix.** Pipe the flow, or pass it as an argument:

```bash
echo '[["goto","https://example.com"],["text"]]' | browse chain
browse chain 'goto https://example.com | text'
```

<a id="browse-chromium-path-failed"></a>
### `Chromium at GSTACK_CHROMIUM_PATH=<path> failed to launch: ...`

**Meaning.** Headless browse and make-pdf now use `GSTACK_CHROMIUM_PATH`
(NixOS, macOS 13). That binary could not start.

**Fix.** Point `GSTACK_CHROMIUM_PATH` at a working Chromium, or
`unset GSTACK_CHROMIUM_PATH` to use gstack's bundled one.

<a id="browse-profile-in-use"></a>
### `Headed Chromium profile <dir> is in use by Chromium PID <pid> (started by PID <ppid>: <name>). ...`

**Meaning.** Headed browse keeps one profile per project
(`<project>/.gstack/chromium-profile`). A live browser owns this one, and
browse never kills it. `... is locked by PID <pid> on another host (<host>)`
means the lock came from another machine through a synced folder.

**Fix.** Close that browser, or `export CHROMIUM_PROFILE=<another dir>`. For the
other-host case, stop it there, or remove `<dir>/SingletonLock` once you are
sure nothing uses it.

<a id="browse-profile-per-project"></a>
### `[browse] Headed browse now keeps a profile per project ...`

**Meaning.** First use copies your logins from `~/.gstack/chromium-profile`
when no browser is using it; otherwise it starts fresh and prints how to import.
`browse profiles` lists them, `browse profiles prune --days 30` removes idle ones.

<a id="browse-blocked-address"></a>
### `Blocked: <host> is a cloud metadata or link-local address` / `... resolves to a cloud metadata or link-local address`

**Meaning.** Browse refuses 169.254.0.0/16 (including container credential
endpoints), 100.100.100.200, fe80::/10 and fc00::/7 in every numeric spelling,
including after a redirect or a page-driven navigation. The tab is reset to
`about:blank` and the command fails. This cannot be overridden.

<a id="browse-forbidden-origin"></a>
### `forbidden origin` from the sidebar terminal

**Meaning.** The terminal accepts only gstack's extension. A self-built or forked
extension has a different ID. `BROWSE_EXTENSION_ID` is no longer read.

**Fix.** `gstack-config set browse_extension_id <your 32-letter id>`.

<a id="browse-type-selector-hint"></a>
### `hint: "<word>" looks like a CSS selector`

**Meaning.** Bare `browse type <text>` types into the focused element. The first
word looked like a selector, so it was typed as text.

**Fix.** `browse type --selector '<sel>' <text>` (put text that starts with `--`
after `--`).

<a id="browse-server-node-missing"></a>
### `server-node.mjs not found. Run bun run build` (Windows)

**Fix.** `cd <gstack checkout> && bun run build`.

<a id="freeze-helpers-out-of-date"></a>
### `[freeze] Hook helpers out of date (partial upgrade?)`

**Meaning.** `check-freeze.sh` and `hook-extract.sh` come from different gstack versions.

**Fix.** `cd <gstack checkout> && ./setup` (or `/unfreeze`).

<a id="browse-chromium-pid-unrecorded"></a>
### `[browse] Could not record the Chromium PID (CDP SystemInfo.getProcessInfo: <error>); browse stop cannot reap a surviving Chromium.`

**Meaning.** For a headless Chromium it launched, browse reads the browser's
process id over CDP so `browse stop` can kill a browser that outlives the
server. That read failed or took longer than 2 seconds, so this session's
browser is not recorded. Browsers gstack did not launch are never recorded or
killed.

**Fix.** After `browse stop`, check for a leftover browser with
`ps aux | grep -i chrom` and end it with `kill <pid>`.

<a id="browse-no-active-page"></a>
### `No active page. Use "browse goto <url>" first.` (after the last tab was closed outside browse)

**Meaning.** When every tab was closed outside browse (the headed window's tabs
closed by hand, or a page that closed itself), earlier releases failed every
later command this way, `status` and `stop` included, until the daemon was
killed (#3167). Now `status` and `stop` answer without opening a tab, and any
other command opens one new blank tab first and prints
`[browse] warning: every tab was closed outside browse, so this command ran on a new blank tab; open your page again with: browse goto <url>`.

**Fix.** `browse goto <url>` to open your page again.

**Fixed in.** The first release after v1.91.101.0 (#3167).

<a id="browse-tab-unrecoverable"></a>
### ``browse: every tab was closed outside browse and a new one could not be opened, because the browser or its context is gone (<cause>); fix: run `browse restart` ... (BROWSE_TAB_UNRECOVERABLE)``

**Meaning.** Every tab was closed outside browse and the browser, or its
context, is gone too, so browse could not open a tab to run the command.
`browse status` and `browse stop` still answer.

**Fix.** `browse restart` (`$B restart` inside a gstack skill), then run the
command again.

**Fixed in.** The first release after v1.91.101.0 (#3167).

---

## Windows

<a id="windows-smart-app-control"></a>
### `Windows blocked compiled gstack binaries at launch (Smart App Control or another application-control policy, #2595)` / `bash: .../browse.exe: Permission denied`

**Meaning.** Known issue (#2595, #2124). gstack compiles five binaries on your
machine with Bun: `browse`, `find-browse`, `design`, `pdf` and
`gstack-global-discover`. They are unsigned, and a binary built on one machine
never earns the reputation Smart App Control accepts instead of a signature, so
Windows 11 with Smart App Control on refuses to start them. Git Bash reports
that as `Permission denied`, which looks like a file-permission problem but is
code integrity (PowerShell says `An Application Control policy has blocked this
file`). setup now runs each binary's `--version` and names the blocked ones and
the skills that need them: the gstack browser fallback (`/browse`, `/qa`,
`/qa-only`, `/design-review`, `/canary`, `/benchmark`, `/pair-agent`,
`/scrape`, `/make-pdf`), the design binary (`/design-consultation`,
`/design-shotgun`, `/design-html`, `/plan-design-review`) and `/retro global`.
Every other skill works. `gstack-doctor` shows the same state in its
`browse bundle` and `binaries` rows. The exact Windows error text has not been
verified on a Smart App Control machine; setup prints the raw first line beside
its classification.

**Fix.** There is no per-file allowlist for Smart App Control. Today's options:

- Run gstack inside WSL (`wsl --install`, then install gstack in the Linux
  distro). WSL runs gstack's Linux build, which Smart App Control does not check.
- Or turn Smart App Control off in Windows Security > App & browser control >
  Smart App Control settings. On Windows 11 with the April 2026 update you can
  turn it back on later without reinstalling Windows; on older builds turning it
  off is permanent. gstack's binaries stay blocked whenever it is on.

Signed release binaries are the real fix and are tracked in `TODOS.md`. After
Windows allows the binaries, re-run `./setup`; the message goes away.

**Expected result.** setup prints no "Windows blocked" line, and
`gstack-doctor` shows `ok` for `browse bundle` and `binaries`.

<a id="setup-ps1-unexpected-eof"></a>
### `setup: -c: line 1: unexpected EOF while looking for matching '"'` / `setup: -c: line 2: syntax error: unexpected end of file` from `.\setup.ps1`

**Meaning.** Windows PowerShell 5.1 (`powershell.exe`, the default PowerShell
on Windows) passes arguments to native programs the legacy way and strips
the double quotes inside them. Until the release that fixed #3130,
`setup.ps1` handed Git Bash a `bash -c` script with double quotes in it, so
bash read a broken script and nothing was installed. PowerShell 7.3 and newer
were not affected.

**Fix.** Update gstack (in Git Bash: `cd ~/.claude/skills/gstack && git pull
--ff-only`), then run `.\setup.ps1` again: its script no longer holds a
double quote. Until then, run `./setup` from Git Bash, or `.\setup.ps1` from
PowerShell 7 (`pwsh`).

<a id="setup-ps1-empty-argument"></a>
### `setup.ps1: argument N is empty; setup takes no empty arguments. Nothing was installed or changed. (SETUP_PS1_EMPTY_ARGUMENT; ...)`

**Meaning.** One of the arguments you gave `.\setup.ps1` is an empty string
(for example `''` or an unset variable such as `$hostName`). setup takes no
empty arguments, and the way `setup.ps1` hands arguments to Git Bash under
Windows PowerShell 5.1 cannot carry one, so it refuses before running
anything.

**Fix.** Drop the empty argument, or give it a value:

```powershell
.\setup.ps1 --host codex
```

---

<a id="chromium-install-exit-127"></a>
### `Chromium bootstrap: chromium-install — <bun> x playwright install chromium exited 127 (command not found); install Bun from bun.sh (winget Bun ships no bunx), or skip with ./setup --no-browser (Git Bash) or .\setup.ps1 --no-browser (PowerShell)`

**Meaning.** setup (or `bin/gstack-browser-ensure`, as `BROWSER_UNAVAILABLE
<bun> x playwright install chromium exited 127 (command not found)`) could
not run the Playwright installer: the shell found no command to run. Until
the release that fixed #3131, setup called `bunx`, which a Bun installed with
winget does not ship, and reported the failure as `exited 127 (offline,
proxy, or blocked download?)`. It now runs `bun x` through the Bun it
resolved, so exit 127 means that Bun itself, or a command it starts, is
missing. Skills that do not need a browser are installed either way.

**Fix.** Install Bun from https://bun.sh (it ships `bun` and `bunx`), then
run setup again. To install without the browser for now, in Git Bash:

```bash
./setup --no-browser
```

or in Windows PowerShell:

```powershell
.\setup.ps1 --no-browser
```

---

<a id="bash-unavailable"></a>
### `gstack: no Git Bash found to run gstack's bash scripts on Windows (tried ...); fix: ... (BASH_UNAVAILABLE)`

**Meaning.** Windows cannot run a shebang script, so gstack hands its bash
scripts (`gstack-wtree`, `gstack-slug`, the hooks' bins, `bash -c` commands in
regen and pregate selection manifests) to Git Bash. It looks in this order and
the message lists every candidate it tried with the reason it was rejected:

1. `GSTACK_GIT_BASH` (or the older name `GSTACK_BASH`; when both are set and
   differ, `GSTACK_GIT_BASH` wins and a one-line warning says so). A value
   that does not exist is refused, not skipped.
2. bash next to `git --exec-path` (finds scoop, per-user and portable Git).
3. `C:\Program Files\Git`, `C:\Program Files (x86)\Git`,
   `%LOCALAPPDATA%\Programs\Git` and scoop's `git\current`.
4. A `bash` on PATH, only when `uname -s` reports MSYS or MINGW. WSL's
   `bash.exe` in `System32` or `WindowsApps` is never used: it reads
   `C:\...` paths as Linux paths. A PATH bash that is neither (Cygwin, for
   example) is no longer used either.

Before #3197 these commands spawned the scripts directly, so `gstack-restamp`
refused with `cannot fingerprint the working tree ()` and `gstack-gate-diff`
and `gstack-evidence` silently dropped the fingerprint.

**Fix.** Install Git for Windows (`winget install --id Git.Git -e` in
PowerShell), or point gstack at your bash.exe for good. An `export` in Git Bash
reaches only that shell, so set it where Claude Code reads it:

- Windows PowerShell 5.1 or PowerShell 7, then restart Claude Code:

  ```powershell
  [Environment]::SetEnvironmentVariable('GSTACK_GIT_BASH', 'C:\Program Files\Git\bin\bash.exe', 'User')
  ```

- Or the `env` block of `~/.claude/settings.json`:

  ```json
  { "env": { "GSTACK_GIT_BASH": "C:/Program Files/Git/bin/bash.exe" } }
  ```

The hooks cache the bash they found in `<state root>/cache/windows-bash.json`
(keyed by `git.exe`'s path and modification time, rechecked before use); the
override is never cached.

**Expected result.** `gstack-restamp --dry-run` prints its diff and
`gstack-gate-diff` records a candidate ending in a tree id instead of
`+nowtree`.

---

## Memory and gbrain

Every message below is also in [docs/gbrain-sync-errors.md](gbrain-sync-errors.md)
with more detail, along with the per-page ingest messages (`FAILED`,
`re-queued`, `quarantined`, reconcile progress, kept-on-this-machine notices).

<a id="gbrain-db-unreachable"></a>
### `database host unreachable (<code> <host>); your gbrain config is unchanged. Fix: check network or VPN, then re-run /sync-gbrain.`

**Meaning.** A DNS or connection error reaching your gbrain database. It used to
look like a broken config, and setup stripped brain features while offline.

**Fix.** Restore the network or VPN, then `/sync-gbrain`.

<a id="memory-ingest-unattributed-failures"></a>
### `[memory-ingest] ERR: gbrain reported N failure(s) it did not attribute to a staged page ... Refusing to advance state.`

**What is kept.** Nothing is marked saved, so nothing is lost. After three such
runs gstack bisects the batch and quarantines the page that breaks it.

**Fix.** Re-run `/sync-gbrain`.

<a id="memory-reconcile-not-run"></a>
### `[memory-ingest] reconcile: not run (...)`

**Meaning.** After upgrading, gstack re-checks transcripts it had marked saved
and re-imports the ones missing from your brain. That check needs a local gbrain.

**Fix.** `/setup-gbrain`, then `gstack-memory-ingest --reconcile` (`--dry-run` to preview).

<a id="memory-ingest-locked"></a>
### `[memory-ingest] ERR: another memory ingest (pid <N>) is writing <state file>; not run.`

**Fix.** Wait for it to finish, then re-run `/sync-gbrain`.

<a id="memory-ingest-state-unsaved"></a>
### `[memory-ingest] ERR: could not save ingest state <path>: <error>.`

**Fix.** Fix permissions or free disk space under your gstack state root, then `/sync-gbrain`.

<a id="memory-ingest-transcript-checkout"></a>
### `[memory-ingest] kept N transcript page(s) for <repo> on this machine: gbrain source <id> ...`

On a managed gbrain brain (0.60+), an import lands only in a source bound to a
checkout this host owns, so gstack binds each transcript source to its own
checkout, `<state root>/gbrain-transcript-sources/<id>/`, before importing.
The partition stays on this machine, unstamped, and imports on a later run when:

- **held by another owner**: the source is bound to another host or another
  directory. gstack never takes it over. Inspect it with
  `gbrain sources writer status --source <id> --json`; the owner releases it
  (`gbrain sources writer transfer prepare <id>` on the owning host) or you
  re-bind it here with `gbrain sources set-path <id> <checkout>`.
- **the state root is ephemeral** (`GSTACK_EPHEMERAL=1`): a binding would point
  at a directory that vanishes with the machine. Run with a durable root:
  `GSTACK_STATE_ROOT=<durable directory> gstack-memory-ingest --bulk`.
- **bound to gstack's checkout, but it is missing or not active**: restore the
  checkout from a backup of the state root, or follow `gbrain doctor --json`.
- **could not bind**: the message carries gbrain's refusal; inspect the source
  with the writer status command above.

<a id="gbrain-artifacts-not-indexed"></a>
### `curated artifacts pushed to git, but gbrain source <id> has 0 indexed pages. Fix: gbrain sync --source <id>, then re-run /sync-gbrain`

**Fix.** `gbrain sync --source <id>`, then `/sync-gbrain`.

<a id="gbrain-dream-skipped"></a>
### `dream: skipped — the installed gbrain cannot run only the resolve_symbol_edges phase, and the full dream cycle costs about 35 minutes ...`

**Meaning.** `/sync-gbrain --dream` (and `--full`'s auto-build) now runs only the
call-graph phase. Your gbrain cannot scope it, so nothing ran.

**Fix.** `gstack-gbrain-install`, then `/sync-gbrain --dream`. Or run the full
cycle yourself: `gbrain dream --source <id>`.

<a id="gbrain-cycle-freshness-unknown"></a>
### `call graph for <source>: unknown: installed gbrain does not expose cycle_freshness`

**Fix.** `gstack-gbrain-install`.

<a id="gbrain-path-unavailable"></a>
### `[gbrain-sync] gbrain source <id>: path unavailable (<path>); gstack skips it.`

**Meaning.** A deleted worktree's code source. gstack never removes it on its own.

**Fix.** Preview, then remove the ones gstack can prove belonged to this machine:

```bash
gstack-gbrain-sync --prune-gone-worktrees --dry-run
gstack-gbrain-sync --prune-gone-worktrees
```

---

## Eval reports and pass-rates

These come from the paid eval census reports and `bun run eval:pass-rates`.
The walkthrough for a red census is [docs/evals/census-red.md](evals/census-red.md).

<a id="pass-rates-unknown-flag"></a>
### `eval:pass-rates: unknown flag <flag>` / `eval:pass-rates: unknown case <id> (not an E2E, judge or paid test file id)`

**Meaning.** The flag or case id is not recognized. The command exits 2 before
fetching anything.

**Fix.** `bun run eval:pass-rates --help` lists the flags. `--case` takes a
registry id from `test/helpers/touchfiles-data.ts` or a paid test file path.

<a id="failure-cause-newer"></a>
### `unknown failure_cause "<x>" (written by a newer gstack; update this checkout to read it)`

**Meaning.** A trial record names a failure cause this checkout does not know.
A newer gstack wrote it.

**Fix.** `git pull` (or rebase your branch onto `main`), then rerun the command.

<a id="paid-case-several-owners"></a>
### `--case <id>: registered by <file>, <file>; it needs exactly one`

**Meaning.** More than one paid test file registers the case, so
`test-paid-shards.ts --case` cannot pick one file.

**Fix.** Run the red shard's file directly; the report's `after a repair:` line
prints it: `EVALS=1 EVALS_TIER=<tier> bun test <file>`.

<a id="evidence-too-large"></a>
### `evidence: <artifact> too large to fetch (<N> MB)`

**Meaning.** The slice artifact holding this red's transcript is over 64 MB, so
`eval:pass-rates --run` does not download it.

**Fix.** Download it from the run page, or
`gh api repos/<owner>/<repo>/actions/artifacts/<artifact id>/zip > slice.zip`.

<a id="headroom-alarm"></a>
### `[headroom] <case> session <key>: max <s> of <s> (<pct>) over <n> sample(s), above the 85% cap. Cut work in the skill or fixture; budgets are never raised ...`

**Meaning.** `eval:pass-rates --gate` (the weekly report) found a case whose
slowest session used more than 85% of the timeout it armed. It is one timeout
away from a red.

**Fix.** Cut work in the skill or fixture. Budgets are never raised. Check the
case with `bun run eval:pass-rates --headroom --case <id>`.

<a id="cost-unknown"></a>
### `cost unknown (no billing captured for any of <N> trial(s))` / `cost $<x> known + <N> of <M> trial(s) cost unknown`

**Meaning.** PTY and Codex sessions record no billing, so their cost is
unknown. Only the known sum is shown.

**Fix.** None needed; this is informational.

<a id="cause-provider-stall"></a>
### `· cause provider_stall: no stream event for <N>s ...`

**Meaning.** The session streamed partial messages, then received no event of
any kind for at least 120 seconds while a model request was in flight and no
tool, permission prompt, hook or subagent was outstanding. Under EVAL_POLICY v1
it is still a failed trial.

**Fix.** Inspect it with `bun run eval:pass-rates --run <run id> --case <id>`.
A paid rerun happens only after a repair.

<a id="overlay-wrong-answer"></a>
### Overlay record with `taskCorrect: false` and `answerError` (contract v4)

**Meaning.** The trial completed with a wrong answer. Under overlay contract v4
that is a valid measurement in the comparison; only an overlay-ON wrong answer
fails the case.

**Fix.** Read `answerError` in the trial JSON. No rerun is needed.

<a id="detector-corpora-stale"></a>
### `[detector-corpora] <N> stale entries (refresh from a current census when one fails)`

**Meaning.** Some replay-corpus entries came from an older input series of
their case. This is informational; the corpus still replays them.

**Fix.** When that case goes red in a census, add the new capture to its corpus
and check it with `bun test test/detector-corpus-<case>.test.ts`.

<a id="auq-substance-panel"></a>
### `recommendation substance median <x> < 4 over samples [<a>,<b>,<c>] (boilerplate/weak)`

**Meaning.** The auq-matrix case scores each captured question's recommendation
with a 3-sample judge panel; fewer than 2 of the 3 samples reached 4, so their
median was below 4.

**Fix.** Read the logged samples and the captured question. A fix goes in the
skill text, followed by one diagnostic run of auq-matrix.

---

## Push guard (redaction)

<a id="redact-postgres-default-pair"></a>
### `db.url_with_password` HIGH on a default `postgres`/`postgres` login whose host is a service name like `@db` (pre-push BLOCKED)

**Meaning.** The default `postgres:postgres` pair is exempt only on `localhost`
or `127.0.0.1`. A service name like `@db` says nothing about where the URL ends
up deployed, so it still blocks.

**Fix.** Use `postgres://postgres:postgres@localhost:5432/...` in local and CI
config, or read the URL from an env var. If the credential is real, rotate it.
Bypass once: `GSTACK_REDACT_PREPUSH=skip git push`.
If the URL is a reviewed, public dev-only value, list it in
[`.gstack-redact-allowlist`](#redact-allowlist).

<a id="redact-allowlist"></a>
### `.gstack-redact-allowlist (<n> entries) suppressed <m> finding(s) in this push`

**Meaning.** The pushed commit carries `.gstack-redact-allowlist` at the repo
root. Each line (after trimming; `#` starts a comment) is one exact matched
span: the whole `postgres://USER:PASSWORD@host:port` URL for
`db.url_with_password`, the key for a key pattern, the address for `pii.email`. A finding is suppressed only when its
matched text equals an entry, so a password alone, a substring, or a different
key still reports and still blocks. The hook reads the file from each pushed
commit, never the working tree, and ignores a file over 64 KiB. Every push that
carries entries prints this line and each suppressed finding's file and line.
It works alongside `gstack.redact.allowEmail`, which stays a local setting.

**Fix.** Nothing, if every listed suppression is the reviewed value. Remove an
entry that no longer applies; rotate a credential that is real.

<a id="redact-version-as-ip"></a>
### `pii.ip_public` MEDIUM on a four-part version number

**Meaning.** The line does not declare the value as a version.

**Fix.** Write it as `version: 1.2.3.4`, `"version": "..."` or `v1.2.3.4`.
MEDIUM findings do not block pushes.

<a id="redact-prepush-email"></a>
### `MEDIUM  pii.email  <file>:<line>` from the pre-push hook

**Meaning.** The pushed lines add an email address that is not yours and not
already in the destination's commit metadata. The hook does not report your
own address (`git config user.email`), addresses listed in
`gstack.redact.allowEmail`, or author and committer addresses (mailmapped too)
from the history of the pushed commits, of the remote tip being replaced, and,
for a new branch pushed to a configured remote, of that remote's tracking refs.
An address only another remote knows still reports. If the hook also printed
`existing-email suppression was limited for this push`, it could not read the
history in 5 seconds, so known authors may be listed too.

**Fix.** Remove the address, or allow it for this repo:
`git config --add gstack.redact.allowEmail <address>`. If it is your own
address, check `git config user.email`. The allowlist only covers `pii.email`;
it never lets a HIGH finding through.

## Unattended runs and artifacts

Workflow commands (`gstack-artifact`, `gstack-gate`, `gstack-autoplan-timing`,
`gstack-review-log --findings`) end each error line with a code in
parentheses, for example `(ARTIFACT_STALE)`. The codes and anchors come from
`lib/result-codes.ts`; grep the code, not the prose. Every such command shares
one exit table: `0` ok, `1` fail, `2` usage, `3` refused or needs a flag. The
artifact contract itself is in [docs/unattended.md](unattended.md).

<a id="artifact-invalid-json"></a>
### `ARTIFACT_INVALID_JSON`

**Meaning.** `run.json`, `timing.json` or another JSON artifact did not parse.

**Fix.** Regenerate the run with the tool that writes it. A manifest is never
hand-edited; a partial write means the writer was interrupted.

<a id="artifact-unsupported-version"></a>
### `ARTIFACT_UNSUPPORTED_VERSION`

**Meaning.** The artifact's `schema_version` is one this gstack does not read
(`gstack-artifact schema <name>` prints the versions it validates).

**Fix.** Upgrade the consumer (`/gstack-upgrade`) or regenerate the run with
this gstack.

<a id="artifact-schema"></a>
### `ARTIFACT_SCHEMA`

**Meaning.** A required field is missing, has the wrong type, or holds a value
outside its enum. The message names the file, row and field.

**Fix.** Compare the row with `gstack-artifact schema <name>` and regenerate it.

<a id="artifact-missing"></a>
### `ARTIFACT_MISSING`

**Meaning.** `run.json` names an artifact that is not in the run directory.

**Fix.** Copy the whole run directory, not single files. If the file was never
written, rerun the phase that writes it.

<a id="artifact-stale"></a>
### `ARTIFACT_STALE`

**Meaning.** The file's bytes no longer hash to the value `run.json` recorded,
so the manifest does not describe this file.

**Fix.** Treat the run as partially rewritten. Regenerate it, or re-bind the
file through the tool that wrote it so the manifest is updated with it.

<a id="artifact-path-escape"></a>
### `ARTIFACT_PATH_ESCAPE`

**Meaning.** An artifact path resolves outside the run directory: a `..`
segment, an absolute path, or a symlink that points elsewhere.

**Fix.** Keep every artifact inside the run directory under a plain relative
name. A run directory is copied as one unit; nothing outside it is part of
the contract.

<a id="artifact-malformed-jsonl"></a>
### `ARTIFACT_MALFORMED_JSONL`

**Meaning.** A JSONL artifact has a line, usually the last, that is not one
JSON object. The writer was interrupted mid-append.

**Fix.** Rerun the phase that writes the file. Do not trim the line by hand;
the row it held is lost either way, and the manifest hash would change.

<a id="artifact-duplicate-id"></a>
### `ARTIFACT_DUPLICATE_ID`

**Meaning.** Two rows in one file share an id.

**Fix.** Ids are run-bound (`<run>-...`) and unique per file. Regenerate the
rows with the tool that assigns them.

<a id="artifact-unbound-id"></a>
### `ARTIFACT_UNBOUND_ID`

**Meaning.** A row id does not start with the run id in `run.json`, so it
could belong to another run.

**Fix.** Regenerate the row with this run's id.

<a id="artifact-dangling-ref"></a>
### `ARTIFACT_DANGLING_REF`

**Meaning.** A task's `findings`, `blocked_by` or `depends_on`, or a decision's
reference, names an id no artifact in this run defines.

**Fix.** Write the referenced finding, decision or task first, or drop the
reference. A `depends_on` entry may also name a `pr` label that another task
in the file carries.

<a id="artifact-dependency-cycle"></a>
### `ARTIFACT_DEPENDENCY_CYCLE`

**Meaning.** Tasks depend on each other in a cycle, so no lane could start.

**Fix.** Break the cycle in `depends_on`. The message lists the ids on it.

<a id="artifact-count-mismatch"></a>
### `ARTIFACT_COUNT_MISMATCH`

**Meaning.** A `counts` value in `run.json` disagrees with the rows in the file
it summarizes (for example `counts.findings: 65` beside 64 rows).

**Fix.** Regenerate `run.json` after the last row was written. A count never
replaces the file; the hash and the rows are the record.

<a id="artifact-run-interrupted"></a>
### `ARTIFACT_RUN_INTERRUPTED`

**Meaning.** `run.json.status` is not terminal, or a voice is still
`running`/`pending`. The artifacts describe an unfinished run.

**Fix.** Resume it (`gstack-autoplan resume --out <dir>`, PR B-runner) or
consume the artifacts as partial and say so.

<a id="artifact-reviewer-missing"></a>
### `ARTIFACT_REVIEWER_MISSING`

**Meaning.** A phase in `required_phases` is absent from `phases`, a voice has
no terminal status, or a completed voice has no bound output file (path and
hash) in `artifacts`.

**Fix.** Finish the phase. A missing voice is missing coverage; the validator
never fills it in as N/A.

<a id="artifact-guard-line-missing"></a>
### `ARTIFACT_GUARD_LINE_MISSING`

**Meaning.** The run says `session_kind: unattended`, but its
`review-record.md` does not carry the `GUARD_NOT_INSTALLED` line, so the
record does not state that publication order was unverified.

**Fix.** Start the run through `gstack-skill-start` (it prints the line) and
keep the line in the review record.

<a id="guard-not-installed"></a>
### `autoplan guard: not enforced by this host; publication order is unverified (GUARD_NOT_INSTALLED)`

**Meaning.** The autoplan publication hook only executes inside Claude Code.
On every other host, and in every `unattended` session, the hook is present
but never runs, so phase publication order rests on the snapshot hashes
recorded per phase rather than on the guard.

**Fix.** Nothing on this host. The line is printed once per run and belongs
in the review record; `gstack-artifact validate` requires it for an
unattended run. On Claude Code a *missing* hook file still denies every
guarded call (a broken install must not pass as an absent one).

<a id="review-status-mismatch"></a>
### `review-log: status mismatch ... (REVIEW_STATUS_MISMATCH)`

**Meaning.** The row handed to `gstack-review-log` claims a `status`,
`unresolved`, `issues_found` or `critical_gaps` that the `--findings` file
contradicts (for example `status: clean` beside open findings). The row was
not written.

**Fix.** Fix the findings file, not the claim, and log again. Omit the claimed
fields and let the row be derived from the file.

<a id="gate-rev-stale"></a>
### `GATE_REV_STALE`

**Meaning.** The reply names a `gate_rev` older than the gate list's current
revision, so it may answer items that changed.

**Fix.** Render the current list (`gstack-gate render <file>`), read it, and
reply with the printed `gate_rev`.

<a id="gate-reply-unparsed"></a>
### `GATE_REPLY_UNPARSED`

**Meaning.** Part of the reply matched no gate item or option. Nothing was
applied; the unparsed tokens are listed.

**Fix.** Reply with `rec` (alias `all`), with `rec except <tokens>`, with
`<id><option>` tokens (`d3b uc1a`), or with `as-is` (the plan as written). A
bare `yes` or `no` is ambiguous across multi-option items and is never guessed.

<a id="answer-by-required"></a>
### `ANSWER_BY_REQUIRED`

**Meaning.** `gstack-autoplan answer` ran in an unattended run without
`--by`, or with a value that is neither `human` nor `agent:<id>`. The
artifacts must say who answered a gate: an owner typing tokens and an agent
relaying or deciding them look identical in `decisions.jsonl` otherwise.
Nothing was applied.

**Fix.** Re-run with `--by human` when the owner typed the tokens, or
`--by agent:<thread or id>` when an agent relays or decides. The value is
recorded as `answered_by` on every decision row the reply answers and in the
review record's gate line.

## Queue-aware ship: policy, restamp, tree receipt, ship receipt

`gstack-ship-policy`, `gstack-restamp`, `gstack-tree-receipt`,
`gstack-ship-receipt` and `gstack-evidence bundle|ancestor` share the exit
table above and end each error line with a code in parentheses. The policy
file is described in [docs/ship-policy.md](ship-policy.md); the queue flow in
[docs/ship-policy.md#stamp-at-merge](ship-policy.md#stamp-at-merge).

<a id="policy-source-unavailable"></a>
### `policy source unavailable — fix: git fetch origin <base> --depth=1 (POLICY_SOURCE_UNAVAILABLE)`

**Meaning.** The policy is read from the committed copy on `origin/<base>`,
and that ref does not resolve here (a shallow or detached gate checkout, or a
fetch that never happened). The tool exits 3 and never falls back to the
working-tree file silently. For `gstack-pregate` the same refusal covers a base
`.gstack/pregate.json` git cannot read (a timeout, an oversized blob, a missing
or corrupt object) that `git ls-tree` cannot confirm is absent; it never falls
through to the user-owned file. It also refuses when Bun loaded a `.env` file
from the working directory (a bare `bun gstack-pregate`), since a branch could
then pick the user policy: run `gstack-pregate` directly or as
`bun --no-env-file`.

**Fix.** `git fetch origin <base> --depth=1`, then rerun. To run against the
branch's own file deliberately, pass `--policy-from head --allow-repo-commands`;
the receipt then says `policy: head (unreviewed)`.

`--base` names a branch on `origin`. A commit SHA, a tag or another remote's
ref (`upstream/main` in a fork clone) never resolves as `origin/<base>`, and
fetching it cannot create that ref, so pass a branch that exists on `origin`
(`git branch -r --list 'origin/*'` lists them). `gstack-pregate` says so in
its fix instead of suggesting the fetch.

<a id="policy-invalid"></a>
### `POLICY_INVALID`

**Meaning.** `.gstack/ship-policy.json` has an unknown key, a wrong type or a
value outside its enum. The message names the key. Unknown keys are errors so
a typo never silently means "default".

**Fix.** `gstack-ship-policy validate` lists every problem;
`gstack-ship-policy init --explain` prints each key, its meaning and default.

<a id="policy-containment"></a>
### `POLICY_CONTAINMENT`

**Meaning.** A repo-controlled input escapes its box: an absolute path or a
`..` segment in `stamp_paths`, `release_outputs`, `changelog` or `mirror`; a
glob whose expansion passes 512 regex characters; more than 64 entries in a
list; a `release_tool` over 512 characters or holding a newline. At write time
the same code names a matched file that resolves through a symlink to outside
the repository.

**Fix.** Keep paths repo-relative, globs short and lists small. A mirror may
start with `..` (a sibling checkout) but may not contain an interior `..`.

<a id="policy-exists"></a>
### `POLICY_EXISTS`

**Meaning.** `gstack-ship-policy init` found an existing policy file and wrote
nothing.

**Fix.** Edit the file, or pass `--force` to replace it with the example.

<a id="repo-commands-not-allowed"></a>
### `repo commands not executed (pass --allow-repo-commands) (REPO_COMMANDS_NOT_ALLOWED)`

**Meaning.** The policy declares a command (`release_tool`), and the tool was
run standalone. File presence never authorizes execution: outside `/ship` and
`/land-and-deploy` a repo-declared command runs only with
`--allow-repo-commands`. The commands were listed and nothing was written.

**Fix.** Pass `--allow-repo-commands` when you mean to execute the repo's
code (you already do when you run its tests), or drop the release tool.

<a id="queue-stale"></a>
### `QUEUE_STALE`

**Meaning.** `gstack-restamp` was told the base SHA (`--expect-base`) or the
merge order (`--expect-order`) the allocation assumed, and one of them moved:
the base advanced, a predecessor is not merged, or a successor merged first.
The JSON result carries `expected`, `actual` and `recompute`.

**Fix.** Run the printed `recompute` command, which recomputes the version
from the current base, then merge with the server-side head condition
(`MERGE_CONDITION: sha=<head>`).

<a id="restamp-version-source"></a>
### `RESTAMP_VERSION_SOURCE`

**Meaning.** The configured version source (`VERSION`, `.gstack/version-path`)
is absent, ambiguous or broken at the base revision or on the branch, so there
is no version to bump from.

**Fix.** Create `VERSION` or pin the manifest path in `.gstack/version-path`
on the base branch. gstack never substitutes `0.0.0.0`.

<a id="restamp-merge-conflict"></a>
### `RESTAMP_MERGE_CONFLICT`

**Meaning.** `--after <pr>` builds the merge of the branch and the
predecessor's head in a throwaway worktree, and that merge conflicts. The
branch is untouched.

**Fix.** Merge the predecessor (or the base once it merges) into the branch
under `/ship` Step 3's conflict rules, then run `--after` again.

<a id="restamp-release-tool-failed"></a>
### `RESTAMP_RELEASE_TOOL_FAILED`

**Meaning.** The policy's `release_tool` exited non-zero inside the staging
worktree. The branch was not written; the journal records the stage.

**Fix.** Run the tool by hand in the repo, fix it, then rerun `gstack-restamp`.

<a id="restamp-output-outside-allowed"></a>
### `RESTAMP_OUTPUT_OUTSIDE_ALLOWED`

**Meaning.** The release tool changed a path outside its allowed-output set
(the version files, lockfiles, the CHANGELOG, `stamp_paths` and
`release_outputs`). The restamp refused before writing anything to the branch.

**Fix.** Add the path to `release_outputs` on the base branch when it is a
legitimate generated output, or stop the tool from writing it.

<a id="restamp-conflict"></a>
### `RESTAMP_CONFLICT`

**Meaning.** While applying or rolling back, a file no longer held the bytes
the journal recorded (someone edited it after the stage ran). Overwriting it
would lose that edit, so the restamp stopped.

`cannot fingerprint the working tree (<detail>); nothing written` is the same
code before anything was staged: `gstack-wtree exited <n>: <reason>` carries
the helper's own repair (for example a writable `TMPDIR`), and
`gstack-wtree could not start: ...` is the Windows bash lookup failing (see
[`BASH_UNAVAILABLE`](#bash-unavailable)).

**Fix.** Read `.gstack/tmp/restamp-journal.json`, reconcile the named file by
hand, then rerun `gstack-restamp` (idempotent: a complete stamp is a no-op).

<a id="restamp-predecessor-moved"></a>
### `PREDECESSOR MOVED <old> -> <new> — fix: gstack-restamp --after <pr> again (RESTAMP_PREDECESSOR_MOVED)`

**Meaning.** The gate ran on a synthetic tree built against a predecessor
head that is no longer that PR's head, so the gated tree is not the tree that
will merge. The receipt refuses `gate-reuse: eligible`.

**Fix.** `gstack-restamp --after <pr>` again, gate the new synthetic tree, and
read the receipt again.

<a id="changelog-duplicate-heading"></a>
### `CHANGELOG_DUPLICATE_HEADING`

**Meaning.** Two sections share one version heading, usually a stamp that
re-headed `[Unreleased]` beside an entry that already carried the version.

**Fix.** Merge them into one entry under the new version.

<a id="changelog-top-mismatch"></a>
### `CHANGELOG_TOP_MISMATCH`

**Meaning.** After the stamp, the first entry's heading is not the version in
`VERSION`.

**Fix.** `gstack-restamp` moves the PR's section to the top; if a hand edit
undid that, fix the heading or rerun the restamp.

<a id="changelog-section-missing"></a>
### `CHANGELOG_SECTION_MISSING`

**Meaning.** The CHANGELOG has neither an `[Unreleased]` section nor one
headed by the version currently stamped on the branch, so there is nothing to
re-head.

**Fix.** Under stamp-at-merge, write the PR's entry under `## [Unreleased]`;
the restamp turns it into `## [<version>] - <date>`.

<a id="gate-reuse-not-eligible"></a>
### `gate-reuse: not-eligible (<what changed>) — fix: <rerun command> (GATE_REUSE_NOT_ELIGIBLE)`

**Meaning.** Tree identity alone is not gate evidence. The receipt compares
the gated identity (tree modulo stamps, runtime pins, lockfile hash, CI
workflow hashes, gate command hash, executed selection, runner image) with the
current one and names what differs, or the stamp-sensitive gates that must
rerun on the final tree.

**Fix.** Rerun the named lanes with the printed command on the stamped tree,
or pass `--force-gate <reason>` in `/ship` to run the full gate again.

<a id="evidence-identity-unknown"></a>
### `EVIDENCE_IDENTITY_UNKNOWN`

**Meaning.** The bundle (or ledger record) lacks a committed tree id, runtime
versions, lockfile hashes or the command hash, so no reuse decision can rest on
it. Imported assertions without verification count as unknown too.

**Fix.** Rebuild the bundle on the gate machine after the lanes ran on a
committed head: `gstack-evidence bundle --out <file> --label <lane>...`.

<a id="evidence-bundle-invalid"></a>
### `EVIDENCE_BUNDLE_INVALID`

**Meaning.** The bundle is not valid JSON or not `gstack-evidence-bundle` v1.

**Fix.** Rebuild it with `gstack-evidence bundle`; a bundle is never hand-edited.

<a id="preregistration-not-ancestor"></a>
### `PREREGISTRATION_NOT_ANCESTOR`

**Meaning.** A `preregistration_shas` entry in the policy is not an ancestor
of HEAD, so the preregistered eval does not describe this branch.

**Fix.** Merge or rebase so the commit is in the branch history, or remove the
entry on the base branch. `gstack-evidence ancestor <sha>...` prints one line
per entry; the ship receipt records the result.

<a id="history-policy-violation"></a>
### `HISTORY_POLICY_VIOLATION`

**Meaning.** The policy says `history: merge-only` and the plan would squash,
rebase or otherwise rewrite the branch: `gstack-ship-policy check-history
--plan squash|rebase` refuses (exit 3) before anything moves, and without
`--plan` it reports the violation (exit 1) when the pushed branch is no longer
an ancestor of HEAD.

**Fix.** `git merge origin/<base>` and keep every commit; merge the PR with a
merge commit.

<a id="receipt-missing"></a>
### `RECEIPT_MISSING`

**Meaning.** `gstack-ship-receipt read --pr <n>` found no
```` ```gstack-ship-receipt ```` block in the PR body.

**Fix.** `/ship` Step 18 writes it (`gstack-ship-receipt write ... --pr <n>`);
for an older PR, write it once by hand with the same command.

<a id="receipt-invalid"></a>
### `RECEIPT_INVALID`

**Meaning.** The block exists but does not validate against the `ship-receipt`
schema (`gstack-artifact schema ship-receipt`).

**Fix.** Regenerate it with `gstack-ship-receipt write`; never hand-edit the
block.
<a id="execution-unknown"></a>
### `EXECUTION_UNKNOWN`

**Meaning.** `gstack-autoplan` recorded a dispatch intent for an attempt (the
prompt was handed to a reviewer) but no terminal record followed: no `submit`,
no cancellation. The runner was killed, or the parent never came back. The
provider may have finished and charged; snapshot hashes prove which input was
sent, not whether the review completed. The spend ledger keeps the attempt's
reservation.

**Fix.** If the reviewer finished, submit its result with the same attempt id
(`gstack-autoplan submit --out <dir> --phase <p> --voice <v> --result <file>
--model <id> --attempt <id>`); a late result is still bound. If it did not,
redispatch explicitly with `gstack-autoplan next --out <dir> --redispatch
<attempt>`. `resume` and `next` never redispatch an ambiguous attempt on their own.

<a id="run-locked"></a>
### `RUN_LOCKED`

**Meaning.** Another `gstack-autoplan` process holds `<dir>/run.lock` (pid,
host and start time are in the file). Every mutating command takes the lock
for its duration, so two writers never interleave.

**Fix.** Wait for the owner to exit. If its pid is gone (a killed runner),
`gstack-autoplan resume --out <dir>` takes ownership and reconciles open
attempts; a lock whose pid is alive is never stolen.

<a id="run-not-initialized"></a>
### `RUN_NOT_INITIALIZED`

**Meaning.** The `--out` directory has no `run.json` written by
`gstack-autoplan`, so `submit`, `status`, `answer` and `resume` have nothing to
act on.

**Fix.** Start the run with `gstack-autoplan next --plan <file> --out <dir>`;
the first `next` initializes the run (restore point, active plan, manifest).

<a id="phase-not-awaiting"></a>
### `PHASE_NOT_AWAITING`

**Meaning.** `submit` named a phase or voice that is not waiting for a result:
the phase is already closed, not yet opened, or the voice already has a bound
result.

**Fix.** Run `gstack-autoplan status --out <dir>` and submit for the attempt
the last `next` printed (`ATTEMPT: ... phase=<p> voice=<v>`).

<a id="attempt-mismatch"></a>
### `ATTEMPT_MISMATCH`

**Meaning.** The `--attempt` id is not the open attempt for that phase and
voice, or that attempt was already submitted. A result is bound exactly once;
a second submit of the same attempt is refused rather than overwriting the
first.

**Fix.** Pass the attempt id printed by `next` for this voice. To replace a
bound result, reopen the phase through `answer` (a scope-changing choice) or
start a new run.

<a id="result-receipt-missing"></a>
### `RESULT_RECEIPT_MISSING`

**Meaning.** The result file does not begin with the full-read receipt the
prompt asked for: `INPUT: <phase> <snapshot sha256>`. Either the reviewer did
not read the prompt file through EOF, or the result belongs to a different
snapshot (the plan changed between dispatch and submit).

**Fix.** The reviewer's first line must be the INPUT line from its prompt
file. If the plan changed, run `next` again for a fresh snapshot and
redispatch; a result for an older snapshot is never bound to the current phase.

<a id="result-findings-missing"></a>
### `RESULT_FINDINGS_MISSING`

**Meaning.** The result has no valid canonical findings block. Every reviewer
returns, beside its prose, one fenced block:

````
```gstack-findings
{"severity":"High","title":"...","file":"lib/x.ts","line":12,"fix":"..."}
```
````

one JSON object per line with at least `severity` (`Critical`, `High`,
`Medium`, `Low`, `Informational`) and `title`. An empty fence means the
reviewer found nothing; a missing fence or a malformed row means the result
cannot be reconciled and is refused.

**Fix.** Ask the reviewer for the fence (the prompt names it), or add the rows
from its prose yourself and submit again. Reconciliation runs on these rows,
not on the prose; a prose-only review has no completeness check.

<a id="model-family-conflict"></a>
### `MODEL_FAMILY_CONFLICT`

**Meaning.** The outside voice's model is in the same family as the native
reviewer (both Anthropic, both OpenAI, ...), or its family cannot be
determined from the id. Two voices from one family are one voice; the record
says which was which.

**Fix.** Run the outside voice on a model from another family and pass its id
with `--model`. Families recognized: anthropic, openai, google, xai, deepseek,
qwen, zai, moonshot, meta, mistral, minimax. An id the table cannot classify
is refused; name the model fully (`openai/gpt-6-astra`, not `astra`).

<a id="spend-cap-exceeded"></a>
### `SPEND_CAP_EXCEEDED`

**Meaning.** `spent + reserved + next_estimate` would exceed `--spend-cap`.
The ledger (`<dir>/spend.json`) counts unsettled reservations and unknown
charges at their reservation, so a crashed attempt keeps its cost held until
it is settled or released.

**Fix.** Raise `--spend-cap`, settle attempts whose actual cost is known
(`submit --usage-usd <n>`), release attempts that never ran (`gstack-autoplan
release --attempt <id>`), or stop here. Host-dispatched subagent spend is
`unknown`, never zero.

<a id="consensus-missing"></a>
### `CONSENSUS_MISSING`

**Meaning.** `next` for the Eng phase found a closed prior phase without its
consensus record (`<phase>-consensus.md` plus its reconciliation rows), so the
Eng prompt would be sent without that phase's summary.

**Fix.** `gstack-autoplan resume --out <dir>` re-closes the phase through
reconciliation. The Eng dispatch is refused until every closed phase has its
summary; it is never sent partially.

<a id="outside-runner-unavailable"></a>
### `OUTSIDE_RUNNER_UNAVAILABLE`

**Meaning.** `gstack-outside-voice run --runner <r>` cannot run here:
`codex-cli` found no `codex` binary or no login, `api` found neither
`OPENAI_API_KEY` nor `ANTHROPIC_API_KEY` for the model's family, or
`host-subagent` was called without `--result <file> --model <id>`. When
another runner is configured (`--fallback` or `GSTACK_OUTSIDE_RUNNER`), the
line reads `codex-cli unavailable; using <runner>` and the review proceeds on
that runner; it is a full outside voice, not a degraded one. With no other
runner, this is missing coverage.

**Fix.** `gstack-codex-login` logs Codex in from `OPENAI_API_KEY`
(unattended machines); or set the API key and pass `--runner api`; or run the
review on a cross-family subagent and submit its file with `--runner
host-subagent --result <file> --model <id>`.

<a id="reality-row-missing"></a>
### `REALITY_ROW_MISSING`

**Meaning.** `gstack-plan-reality check --phase <p> <review>` found no
`REALITY: <row> …` line for a row the review must carry (every tier 1 row:
`premise-table`, `already-done`, `surface-check`, `binding-decisions`,
`numbers`, `deferred-asks`, `pr-count`; plus the tier 2 rows whose scope was
passed with `--scope`), or a tier 1 row was marked `n/a`. The check prints
`PLAN_REALITY: phase=<p> rows=<n>/<m> missing=<ids> verdict=<v>` and exits
`1`. In an unattended run the verdict is `incomplete` and the phase does not
close; interactively it is `repair`: produce the missing rows and re-check, at
most twice, then warn at the gate with each row still missing.

**Fix.** `gstack-plan-reality rows --phase <p> [--scope <csv>]` prints each
row's check. Work it and end the review with one line per row,
`REALITY: <row> pass|finding <summary> <file:line>`.

<a id="reality-receipt-missing"></a>
### `REALITY_RECEIPT_MISSING`

**Meaning.** A `REALITY:` line names its row and status but carries no
receipt. A receipt is `path:line`, `path:line-line` or a commit sha; it is what
makes the row a check rather than a claim.

**Fix.** Add where the check was made to the line, for example
`REALITY: already-done pass 0 hits since 2026-10-09 for bin/gstack-doctor 91bbd9e`
or `REALITY: surface-check finding bun upgrade --version absent on 1.3.14 bin/gstack-capy-install:52`.

## Pre-gate: generated-file registry, gstack-pregate, issue links

Both tools read their pin file (`.gstack/generated.json`, `.gstack/pregate.json`)
from `origin/<base>`, never the working tree, and run repo-declared commands only
under `--allow-repo-commands` or inside `/ship`. When the base carries no
`.gstack/pregate.json`, `gstack-pregate run` reads
`<state root>/projects/<slug>/pregate.json` instead (outside the repository; see
docs/pregate.md for the state root and slug).
Details: docs/pregate.md.

<a id="regen-registry-invalid"></a>
### `REGEN_REGISTRY_INVALID`

**Meaning.** `.gstack/generated.json` is not valid JSON, has an unknown key, a
missing `id`/`inputs`/`outputs`, or a duplicate id.

**Fix.** `gstack-regen validate` prints every error with its JSON path; compare
with `gstack-regen init --explain` and fix the file on the base branch.

<a id="regen-containment"></a>
### `REGEN_CONTAINMENT`

**Meaning.** A registry glob escapes the repository (`..`, absolute, more than 64
per list) or a command is not one line under 512 bytes.

**Fix.** Repo-relative globs only; one line per command.

<a id="regen-stale"></a>
### `REGEN_STALE`

**Meaning.** A registered output differs from what its command produces in a
scratch `git worktree` of the current tree: the output is stale or hand-edited.

**Fix.** Run the printed command (`gstack-regen write --only <id>` does it in
place) and commit the outputs. Never hand-merge a generated file: on a conflict
take either side, then regenerate.

<a id="regen-command-failed"></a>
### `REGEN_COMMAND_FAILED`

**Meaning.** A registered command exited non-zero in the scratch worktree.

**Fix.** Run it by hand in the repository and read its output; the scratch
worktree has no `node_modules` of its own, so a command that needs them must
reference the repository's (gstack's entries do through `bun run`).

<a id="regen-deps-missing"></a>
### `REGEN_DEPS_MISSING`

**Meaning.** A registered command exited 0 and its outputs differ from the
committed ones, but `package.json` declares dependencies and the repository has
no `node_modules`, so the scratch worktree ran the generator without them. The
difference may come from the missing dependencies rather than stale files, so
the entry is reported as unverified, not `REGEN_STALE`.

**Fix.** Run the printed install command (`bun install`, or the one matching the
repository's lockfile), then rerun `gstack-regen check` or the pre-gate.

<a id="pregate-config-invalid"></a>
### `PREGATE_CONFIG_INVALID`

**Meaning.** `.gstack/pregate.json` has an unknown key, a wrong type, a glob
that escapes the repository, a runner without `{files}`, or `secrets` in `warn`.
The user-owned `<state root>/projects/<slug>/pregate.json` also refuses when it
sets `sealed` or `price_file` (both are read only from the base branch's copy)
or exists but cannot be read (a dangling symlink on its path counts).

**Fix.** `gstack-pregate validate`. `secrets` and required-lane obligations
cannot be downgraded; every other check id in `warn` is honoured only from the
base branch's copy or the user-owned file. For the user-owned file, edit it
directly at the path the message names. A user file inside the repository, or
reached through a symlink into it, is ignored rather than read (`--explain`
names it).

<a id="pregate-secrets"></a>
### `PREGATE_SECRETS`

**Meaning.** `gstack-redact` found a HIGH finding, or a MEDIUM finding in the
`secret` category, in the lines this branch adds.

**Fix.** Rotate the credential, remove it from the added lines (history
included), rerun. Not downgradable.

<a id="pregate-strays"></a>
### `PREGATE_STRAYS`

**Meaning.** A file was added at the repository root, in a new top-level
directory, or under a scratch name (`zz-*`, `tmp*`, `scratch*`).

**Fix.** Delete or move it. An intentional root file goes in `strays.allow`.

<a id="pregate-literals"></a>
### `PREGATE_LITERALS`

**Meaning.** A changed exported constant (or a named timeout/retry literal) still
appears with its old value in a test file the branch did not update — nightly-
and Heavy-only files included.

**Fix.** Update every listed `file:line`, or keep the old value.

<a id="pregate-no-lane"></a>
### `PREGATE_NO_LANE`

**Meaning.** A touched source file maps to no test through static imports,
repo-path string literals, the `bin/<name>` → `test/<name>*.test.ts` convention
or a `dependencies` declaration (in a Django project, also the files Django
loads by name: settings strings, `include()`, app migrations, admin, templates
and static files). That is a failure, not a pass. Markdown no
test depends on is a docs/no-tests empty lane and is not this error, whether
or not the name says plan, evidence or redproof. A test that reads one of
those files (a quoted path or a `join()` of path segments) still selects that
test. An unmapped source or code file still fails. A file under a test
directory is not this empty lane. Images, fonts and media, and
allowlisted tool config no test names, are the assets-and-tool-config empty lane,
not this error.

**Fix.** Add a test that names the file, or declare its lane (an explicit `[]`
for files with no behaviour) under `dependencies` in `.gstack/pregate.json` (or the user-owned file the message names).
Other non-Markdown documentation goes in `empty_lanes` on the base branch.
Dart files under `integration_test/` or `test_driver/` need a device, so pregate
never runs them: declare `"**/integration_test/**": []` (and
`"**/test_driver/**": []`) under `dependencies` and let CI run them.
With no policy yet, `gstack-pregate init` drafts the `dependencies` entries
from the repo and lists the files it could not place. `--explain` prints every mapping and why. For a file with no lane it also prints the import
specifiers in test files that resolved to no repo file (for example a
`tsconfig.json` `paths` alias such as `@/lib/x` whose target is missing) and any
`extends` hop that was not followed (only relative `extends`, at most 4 hops). If
a test does cover the file, declare it under `dependencies`; if the resolver
should have found it, report the specifier as a resolver gap.

<a id="pregate-lane-failed"></a>
### `PREGATE_LANE_FAILED`

**Meaning.** A local lane the touched files select exited non-zero under
`set -o pipefail`, or reported zero tests (ZERO-RUN).

**Fix.** Read the printed lane log, fix the failure, rerun
`gstack-pregate --stage tests`. A `| tail`-hidden exit is still an exit.

<a id="pregate-incomplete"></a>
### `PREGATE_INCOMPLETE`

**Meaning.** A check timed out, its tool is unavailable, repo commands were not
allowed, or the working tree changed while the check ran. Incomplete is never
pass and blocks publication.

**Fix.** Pass `--allow-repo-commands`, install the tool (for a Dart package the
message names `not on PATH: dart` or `flutter`; fvm also works when the repo pins
it), commit the `pubspec.yaml` of a Dart package the message says has none (or
declare `runner`), raise `--timeout`, or keep the tree still, then rerun.

<a id="pregate-stalled"></a>
### `PREGATE_STALLED`

**Meaning.** A test command the lanes check (or a guard, or the `--remote`
gate) launched wrote nothing to its log for the stall timeout (default 300 s,
`stall_timeout_s` in the base branch's `.gstack/pregate.json` or the user-owned file, or
`--stall-timeout`). pregate killed its process group and names the last test
file started. The check is incomplete, never pass.

**Fix.** Open the printed log, find the hang in the named file (a blocked
child, a server that never exits, a synchronous wait), fix it and rerun
`gstack-pregate --stage tests`. A test that is legitimately quiet for longer
needs a larger `--stall-timeout`; `0` disables the stall kill and leaves only
`--timeout`.

<a id="pregate-receipt-invalid"></a>
### `PREGATE_RECEIPT_INVALID`

**Meaning.** `gstack-pregate clear --remote pregate.json/remote_gate --receipt
<file>` read the remote gate's output and its `PREGATE_REMOTE:` line is missing,
names another tree than the one `pregate.json` tested, reports 0 tests, or
reports failures. The obligation stays uncleared. A run URL alone never clears
this obligation; a `test_backend/<backend>` obligation takes a run URL, recorded
as attested rather than validated.

**Fix.** Run the remote gate on the tree pregate tested and pass its output
file with `--receipt`, or let `gstack-pregate --stage tests --remote --spend-cap
<usd> --allow-repo-commands` run and validate it.

<a id="pregate-stale"></a>
### `PREGATE_STALE`

**Meaning.** `pregate.json` was recorded against a different working-tree
fingerprint than the one being published (the final stamp, a regen, any edit),
or the user-owned policy it ran under was edited or deleted (or one appeared,
or a symlink on its path started pointing nowhere, after a run under the
defaults).

**Fix.** Rerun `gstack-pregate` after the final generation and stamp; Step 18
refuses to write the ship receipt otherwise.

<a id="pregate-remote-uncleared"></a>
### `PREGATE_REMOTE_UNCLEARED`

**Meaning.** A `requires-remote` obligation (a platform lane this machine cannot
run, named by `workflow.yml/job`) has no receipt.

**Fix.** Dispatch that job, then
`gstack-pregate clear --remote <workflow.yml/job> --run-url <url>` (or
`--bundle-lane <label>` from an evidence bundle). The ship receipt carries each
obligation with its receipt.

<a id="issue-unreadable"></a>
### `ISSUE_UNREADABLE`

**Meaning.** An issue named by a `Fixes #N`/`Closes #N` trailer or `--issue N`
could not be read through `gstack-issue-guard`.

**Fix.** Check `gh auth status` and the number. Until it reads, the link is
rendered as `Refs #N`, never `Fixes`.

<a id="issue-lookup-failed"></a>
### `ISSUE_LOOKUP_FAILED`

**Meaning.** `gstack-issue-links` could not resolve the repository, list the open
PRs that close an issue this PR fixes, search the flake issues naming a
`--ci-run` id, or tell this PR's author: `gh` runs as an app (`…[bot]`) and
neither the HEAD commit (unpushed, or not linked to a GitHub user) nor a
user-owned repository names one, so the owner's own open PRs stay in the
`Related:` lines. The closure and reference lines are still printed; `--json`
lists each failure under `unavailable`.

**Fix.** Check `gh auth status`, pass `--repo <owner/repo>` when the remote
is not a GitHub repository and `--author <login>` when `gh` runs as an app,
then rerun. If it still fails, say in the handoff
which lookup is missing; never present the body as complete.

<a id="issue-links-missing"></a>
### `ISSUE_LINKS_MISSING`

**Meaning.** `gstack-ship-receipt write --issues @issues.json --body <file>`
found that the body lacks a `Fixes`, `Refs`, `Flake:`, `Related:`,
`Supersedes` or `Contributed by` line the issues object records, so the PR
body and its receipt would disagree. Nothing was written.

**Fix.** Paste every line `gstack-issue-links` printed under `## Issues` in the
body (or rerun `gstack-issue-links --out` if the issue set changed), then rerun
the receipt write.

## Eval plans, lane ownership, evidence verification, the owner brief

Codes printed by `bin/gstack-eval-plan`, `bin/gstack-lane-check`,
`gstack-evidence verify`, `bin/gstack-owner-brief`, `bin/gstack-contributor-mode`
and `bin/gstack-banned-terms` (plan E1–E3). Each ends an error line in
parentheses; grep the code.

<a id="prereg-incomplete"></a>
### `PREREG_INCOMPLETE`

**Meaning.** `gstack-eval-plan prereg --check <file>` found a required
preregistration section missing or empty: `## Bars`, `## Arms`, `## Decoys`,
`## Stop rules` or `## Held-out exposure` (every held-out set the plan
touches, its prior exposure and the reservation on it).

**Fix.** Fill the named sections before any priced call. A plan that cannot
name its stop rule or its held-out exposure is not preregistered; the pilot
refuses to start without a passing check.

<a id="eval-price-missing"></a>
### `EVAL_PRICE_MISSING`

**Meaning.** An arm's model has no row in `lib/pricing.ts`, so the admission
estimate would be `$0`, which the ledger would admit without limit.

**Fix.** Add the row from the provider's pricing page (USD per million tokens
with `as_of`), or drop the arm. The table prices standard text tokens only;
see the excluded billing categories in `lib/pricing.ts`.

<a id="eval-dry-run-failed"></a>
### `EVAL_DRY_RUN_FAILED`

**Meaning.** The `$0` stub-model dry run over the real input file found a
problem the priced run would have paid for: a row without the fields the
prompt needs, an output budget too small for a reasoning model, or no retry
prompt text.

**Fix.** Repair the named rows or flags (`--output-budget`, `--retry-prompt`)
and rerun `gstack-eval-plan dry-run`. The checklist it prints is the record
the pilot requires.

<a id="eval-arms-unresolved"></a>
### `EVAL_ARMS_UNRESOLVED`

**Meaning.** `gstack-models resolve --role eval-arms` produced no arm and the
repo policy document fallback (`--policy-doc`, default the first of
`docs/model-policy.md`, `MODEL_POLICY.md`, `docs/MODELS.md`) named no priced
model.

**Fix.** Pass `--arms <model,model>`, point `--policy-doc` at the document
that lists the project's allowed models, or fix the model policy config.

<a id="eval-budget-exhausted"></a>
### `EVAL_BUDGET_EXHAUSTED`

**Meaning.** The ledger refused the next reservation: spent + reserved +
unknown charges + the estimate exceeds the cap (`SPEND_CAP_EXCEEDED`
underneath). The run stops with status `budget_exhausted`; nothing is retried.

**Fix.** Read the spend table (`gstack-eval-plan pilot report`), settle or
release the open attempts, then raise `--cap` on purpose or stop.

<a id="lane-conflict"></a>
### `LANE_CONFLICT`

**Meaning.** `gstack-lane-check` found a planned file that an in-flight
branch or pull request already changes; the line names the PR number, the
branch and the hunk count.

**Fix.** Give the file one owner: wait for that PR to merge, stack this lane
on its branch, or drop the file from the plan. Two lanes editing one file is
the merge-conflict incident the check exists to prevent.

<a id="lane-ref-unavailable"></a>
### `LANE_REF_UNAVAILABLE`

**Meaning.** A `--branch` or `--pr` could not be resolved: the ref is not
fetched, or `gh` is missing or not logged in.

**Fix.** `git fetch origin <branch>`, or `gh auth status`. An unresolved lane
is reported as such and never counted as clear.

<a id="evidence-unverified"></a>
### `EVIDENCE_UNVERIFIED`

**Meaning.** `gstack-evidence verify <bundle>` could not verify a lane claim
on this machine: the committed tree differs from the bundle's, the recorded
log is absent or its hash differs, or the probe was not rerun.

**Fix.** Check out the bundle's commit and run `--rerun` to execute the lane
command here, or treat the claim as an imported assertion that never counts
toward gate reuse.

<a id="banned-term-found"></a>
### `BANNED_TERM_FOUND`

**Meaning.** The diff adds a term listed in `.gstack/banned-terms.json`
outside that term's `allowed_paths`. The finding names the term, the file and
line, and the allowed locations.

**Fix.** Remove the term from the added line or move the text to an allowed
path. `/review` and `/document-release` run this check on every diff.

<a id="banned-terms-invalid"></a>
### `BANNED_TERMS_INVALID`

**Meaning.** `.gstack/banned-terms.json` is not valid: `terms` must be a
non-empty list of strings, and each `allowed_paths` entry must be a plain
repo-relative glob (no `..`, no absolute path, no symlink escape).

**Fix.** `gstack-banned-terms init` writes a commented example with every key
at its default; `gstack-banned-terms validate` checks the file.

<a id="contributor-source-unavailable"></a>
### `CONTRIBUTOR_SOURCE_UNAVAILABLE`

**Meaning.** `gstack-contributor-mode detect` found no `maintainers` list in
`.gstack/ship-policy.json` and could not ask the collaborators API (`gh`
missing, not logged in, or no PR author resolvable), so the mode is off and
`source=off` is recorded.

**Fix.** Add `maintainers` to the ship policy (the explicit list always wins),
run `gh auth login`, or pass `--contributor` to force the mode for this review.

<a id="brief-input-missing"></a>
### `BRIEF_INPUT_MISSING`

**Meaning.** `gstack-owner-brief render --out <dir>` needs `gate.json`,
`decisions.jsonl` and `findings.jsonl` in the run directory; one is missing.

**Fix.** Reach the gate first (`gstack-autoplan next --out <dir>` until
`gate_pending`); the brief renders what the gate wrote.

<a id="draft-direction-unresolved"></a>
### `DRAFT_DIRECTION_UNRESOLVED`

**Meaning.** The phase-close rewrite found a `draft direction stands until the
owner decides` line whose decision id is still pending, so it was left as is.

**Fix.** Answer the gate for that id, then rerun `gstack-owner-brief close`;
only decided lines are rewritten, each to its chosen option and the date.

<a id="setup-crlf-repair"></a>
### `warning: left <n> locally edited file(s) with CRLF line endings that gstack pins to LF`

**Meaning.** Git for Windows checks out with `core.autocrlf=true`, so gstack's
nested shell scripts (skill `bin/` helpers, the Claude hook shims,
`lib/cso/images/*`, `scripts/app/*`) were written with CRLF until
`.gitattributes` pinned them to LF (#3110). Git Bash runs them anyway, but a
Linux bash reading the same checkout (a synced tree, WSL, a bind mount) fails
with `set: pipefail: invalid option name`, and a hook that fails that way
blocks the tool call it guards. Pulling the new rule does not fix existing
copies, because git never rewrites a file whose content did not change. Setup
finds those files with one `git ls-files --eol` pass and checks them out again
as LF. It leaves a file you edited locally alone and names it in this warning.
The same section covers `skipped the CRLF repair` (another setup held the
install registry lock) and `the CRLF repair could not rewrite every file`.

**Fix.** For edited files, stash and restore them; git writes them back with LF
and keeps your edits:

```bash
cd ~/.claude/skills/gstack && git stash && git stash pop
```

If the repair was skipped, re-run `./setup` once the other setup finishes. If
it failed, `git checkout -- . && ./setup` in the checkout discards local edits
and rewrites every file. Use your install directory if it is not
`~/.claude/skills/gstack` (`./setup --status` prints it). Expected result: the
next `./setup` prints no CRLF warning.

## Field wave lane CD: pregate guards, regate, sealed output

<a id="pregate-guard-failed"></a>
### `PREGATE_GUARD_FAILED`

**Meaning.** A guard (a repo command such as a serial-test manifest check or a
CLI golden test) from the base branch's `.gstack/pregate.json`, or from the
user-owned file when the base carries none, matched a
file the branch touched and exited non-zero. Guards cover what the import graph
cannot see: manifests, subprocess goldens, registries. They cannot be
downgraded to warn.

**Fix.** Read the guard's lines in the table (exit code, output tail, log path)
and do what its `fix` line says, commit, then rerun
`gstack-pregate run --allow-repo-commands`. A lane reports done only after this
passes and carries the `PREGATE:` line in its handoff.

<a id="migration-collision"></a>
### `MIGRATION_COLLISION`

**Meaning.** `gstack-pregate regate` read `migrations` (`dir`, `id`) from the
base branch's `.gstack/ship-policy.json` and found a migration number this
branch adds that the base branch already has, or that another open PR adds
under a different file name. Both PRs would pass their own gates and the
second merge would break the schema order. When the open-PR lookup cannot
finish (`gh` missing or failing, 1000 open PRs, a PR whose file list GitHub
truncates and cannot be fetched in full) the line says
`MIGRATION_COLLISION: unknown (...)` and `REGATE: not-needed` is withheld.

**Fix.** Take the next free migration number when this PR is next to merge,
rename the file and its id, commit, then rerun
`gstack-pregate regate --against <gated-head> --bundle <file>`. The renamed
migration is a code change, so the gate reruns.

<a id="sealed-output-refused"></a>
### `SEALED_OUTPUT_REFUSED`

**Meaning.** The repo declares a `sealed` policy in `.gstack/pregate.json`
(base branch ∪ the pushed commit) and a commit this push publishes adds a
sealed path or transcript (binary, empty and later-deleted files included), or
adds a line with a sealed-answer marker, a seed or a local home path, and the
destination is public or its visibility is unknown (a new or unreadable
repository counts as public). An unreadable or malformed sealed policy refuses
too. The managed pre-push hook and `gstack-pregate sealed` print one line per
finding: rule, `file[:line]`, commit. They never print the matched text.

**Fix.** Remove the output from every published commit before the branch
reaches the public repository (a later commit that deletes it still publishes
it). A reviewed false positive gets one line in the base branch's
`.gstack/sealed-allow.tsv`: `rule<TAB>path<TAB>sha<TAB>reason`. A private
destination sets `"visibility": "private"` under `sealed` in the base branch's
`.gstack/pregate.json`. Capy's pull-request tool may not run local hooks, so
run `gstack-pregate sealed` yourself before any push or PR creation.

<a id="eval-gate-unpriced"></a>
### `EVAL_GATE_UNPRICED`

**Meaning.** `gstack-eval-plan price-gate` found no call-plan file for the paid
gate: no `--plan-file`, no `price_file` in the base branch's
`.gstack/pregate.json`, or the file has no `GSTACK_EVAL_CALLS` lines. (A
declared `price_file` missing from HEAD is `EVAL_PLAN_STALE`, not this.) A gate whose cost is unknown cannot
be approved as priced.

**Fix.** The consuming repo commits a call-plan file in the format of
[docs/eval-calls.md](eval-calls.md) and names it in `price_file`. Only when the
owner accepts an unpriced gate, rerun with `--allow-unpriced "<reason>"`: it
exits 0, prints `GATE_UNPRICED_OVERRIDE: <reason> (owner-authorized override;
not authorization to spend)` and records the reason in the receipt.

<a id="eval-gate-over-cap"></a>
### `EVAL_GATE_OVER_CAP`

**Meaning.** The gate's priced total is above `--cap-usd`, or one call's
reservation (its share of the input plus `max_out_tokens`) is above `--cap-usd`,
or above `--smoke-cap-usd` for a `scope=smoke` row. A provider refuses a
reservation the cap cannot hold, so the run would fail after spending.

**Fix.** Cut questions, arms or `max_out_tokens` in the call plan and
regenerate it, or raise the cap deliberately with the owner. Never split calls
to slip under it.

<a id="eval-plan-stale"></a>
### `EVAL_PLAN_STALE`

**Meaning.** The call-plan file prices something other than what is being
approved: its `GSTACK_EVAL_GATE` command is not the exact `--gate` string, its
`GSTACK_EVAL_HEAD` is behind HEAD with files other than the plan file changed
since, an input's sha256 at HEAD differs from its `GSTACK_EVAL_INPUT` line, or
the base policy's `price_file` is not in the HEAD commit. `--allow-unpriced`
does not override it.

**Fix.** Regenerate the plan file at HEAD for the exact gate command (the
repo's own producer), commit it, and rerun `gstack-eval-plan price-gate`.

<a id="plan-sections-invalid"></a>
### `PLAN_SECTIONS_INVALID`

**Meaning.** `gstack-autoplan next` reviews only the plan's `## Implementation
plan` section and keeps the `## Review record` private, so the plan needs
exactly one non-empty Implementation plan section followed by one Review record
section, both outside code fences. A plan with neither heading is wrapped
automatically; one heading alone, duplicate or reversed headings, or an empty
section is refused before anything is written. The error names the problem.

**Fix.** Add the missing heading, or rerun the first `next` with `--scaffold`:
it writes `<out>/plan-source.md` with the missing heading added, reviews that
copy and prints `SCAFFOLDED:`. Your plan file is never edited. Duplicate,
reversed or empty sections are ambiguous and must be fixed by hand.

<a id="plan-amend-pending"></a>
### `PLAN_AMEND_PENDING`

**Meaning.** The owner accepted at least one plan change at the gate (each was
printed as an `APPLY:` line), and the run's plan has not absorbed it, so a rerun
would review the old plan. `next` refuses until every accepted change is
incorporated or withdrawn; `export` refuses a `complete` run with one pending.

**Fix.** Edit the plan, then `gstack-autoplan revise --out <dir> --plan <file>
--incorporates <decision id,...>`. `revise` binds each named id to the old and
new Implementation-plan hashes and refuses when the Implementation plan did
not change; an id you do not name stays pending. A packaging or ordering change
(its `APPLY:` line ends `no plan edit needed: revise --settle <id>`) is
discharged with `gstack-autoplan revise --out <dir> --settle <id>` and reopens
nothing. To drop an accepted change
instead, `gstack-autoplan revise --out <dir> --withdraw <decision id>` records
the withdrawal in the journal.

<a id="amendment-unknown"></a>
### `AMENDMENT_UNKNOWN`

**Meaning.** `gstack-autoplan revise --incorporates` or `--withdraw` named a
decision id that is not a pending amendment: the owner never accepted it as a
plan change at the gate (for example a gate answered before gstack recorded
amendments), or it was already incorporated or withdrawn. Nothing was changed.

**Fix.** Name only the ids the refusal lists after `pending:`. With none
pending, revise without `--incorporates`:
`gstack-autoplan revise --out <dir> --plan <file>`.

<a id="amendment-not-settleable"></a>
### `AMENDMENT_NOT_SETTLEABLE`

**Meaning.** `gstack-autoplan revise --settle <id>` discharges an accepted change
without a plan edit, which is honest only for a packaging or ordering change
(the gate item's `changes` is `packaging` or `ordering`) on the plan the run
already reviews: the plan the owner accepted it on, or one a later `revise`
recorded. The named change alters scope, cost or direction, names no `changes`
value, the plan file has edits no `revise` has recorded, or `--settle` came with
a `--plan` that changes the Implementation plan while incorporating nothing.
Nothing was changed.

**Fix.** Edit the plan, then
`gstack-autoplan revise --out <dir> --plan <file> --incorporates <decision id>`,
adding `--settle <id>` to settle packaging or ordering changes in the same call
(or settle them after the revise). The `APPLY:` line for each change says which
path it takes, and `NEXT:` lists the settle step first.

<a id="gate-rec-stale"></a>
### `GATE_REC_STALE`

**Meaning.** `gstack-autoplan recommend` changed a recommendation after the gate
was rendered, so a `rec` (or `all`) reply the owner gave to the earlier render
would take recommendations they never saw. Every render prints
`rec_hash=<h>`; once `recommend` has run, a `rec` answer must name the hash of
the render the owner answered. The same refusal meets a `rec`/`all` reply to a
gate written before `rec` existed (a `gate.json` with no `rec_rev`, from
1.91.101.0 or earlier): that render told the owner `all` leaves items
recommended `b` pending, and `all` now takes them.

**Fix.** Render again (`gstack-gate render <dir>/gate.json --all`), relay it,
and answer with `--rec-hash <h>` from that render. Explicit `<id><option>`
tokens are never refused.

<a id="checkpoint-invalid"></a>
### `CHECKPOINT_INVALID`

**Meaning.** `gstack-autoplan resume --out <dir> --from <checkpoint>` found no
generation it can restore: a `checkpoint.json` is unreadable or not a
schema_version 1 checkpoint, a listed file is missing, is not a regular file,
escapes the generation (an `..` path or a symlinked directory), or does not
match its recorded sha256; or the staged run does not pass
`gstack-artifact validate`. `--from` naming a run's collection restores the
newest generation that verifies, skipping corrupt newer ones; a root holding
several runs must name one. Nothing was written to `--out`.

**Fix.** `gstack-autoplan checkpoints --from <dir>` lists every generation
with `hash=ok` or `hash=bad (<reason>)`; restore an intact one by passing its
directory. With `GSTACK_AUTOPLAN_CHECKPOINT_DIR` set, every command that
leaves the run at rest publishes a new generation and keeps the previous one.

<a id="checkpoint-overlap"></a>
### `CHECKPOINT_OVERLAP`

**Meaning.** The checkpoint directory for this run and the run directory (or,
on restore, the checkpoint and `--out` or its staging directory) are the same
directory or one contains the other, after resolving symlinks. Copying one
into the other would replace or delete the live run, so nothing was touched.
A checkpoint refusal after a committed command prints `CHECKPOINT: failed …`
on stderr and leaves that command's exit code alone.

**Fix.** Point `GSTACK_AUTOPLAN_CHECKPOINT_DIR` (or `--from` / `--out`) at a
directory outside the run, for example the private project-user Drive folder.

<a id="checkpoint-target-exists"></a>
### `CHECKPOINT_TARGET_EXISTS`

**Meaning.** `resume --from` restores only into a missing or empty `--out`
directory, and this one already holds files.

**Fix.** Pass a new `--out` directory, or run `gstack-autoplan resume --out
<dir>` without `--from` to resume the run already there.

<a id="owner-reply-required"></a>
### `OWNER_REPLY_REQUIRED`

**Meaning.** An agent answered the gate (`--by agent:<id>`) without recording
what the owner actually said. Nothing was applied.

**Fix.** Pass the owner's words verbatim: `--owner-reply "<text>"`,
`--owner-reply -` to read them from stdin, or `--owner-reply-file <path>`. They
are stored on every decision row; when they parse under the gate grammar they
must resolve to the same choices as `--reply`.

<a id="gate-owner-reply-mismatch"></a>
### `GATE_OWNER_REPLY_MISMATCH`

**Meaning.** The owner's verbatim reply is itself a gate reply (for example
`rec`), and it resolves to different choices than the tokens the agent relayed.
Nothing was applied.

**Fix.** Relay what the owner chose; passing their reply as `--reply` is always
consistent. When the owner's words and your tokens disagree, ask the owner.

<a id="gstack-version-changed"></a>
### `GSTACK_VERSION_CHANGED`

**Meaning.** `run.json.gstack_version` names a different gstack than the one
running. For an older run (or one written before the field existed) this is a
notice: the command journals `gstack_version_changed`, runs the forward
migrations (for example rewriting decision ids minted before 1.91.95) and
continues. For a run written by a newer gstack the command refuses, because an
older runner cannot know the newer state.

**Fix.** Nothing for the notice. For the refusal, upgrade gstack
(`bin/gstack-upgrade`) on this machine and rerun the command.

<a id="artifact-gate-unsettled"></a>
### `ARTIFACT_GATE_UNSETTLED`

**Meaning.** `gstack-artifact validate` found a run whose status is `complete`
while an approval item of its last gate revision is still pending, or an
accepted plan change (`run.json.amendments`) is still pending. The runner never
writes that state; it comes from a hand edit or an older runner.

**Fix.** Answer the gate with `gstack-autoplan answer` until no approval is
pending, and `revise --incorporates` or `--withdraw` each pending amendment.

<a id="ios-launch-env-invalid"></a>
### `ios-qa launch: GSTACK_IOS_LAUNCH_ENV ... so the app was not launched (<detail>); fix: ... (IOS_LAUNCH_ENV_INVALID)`

**Meaning.** `gstack-ios-qa-daemon` forwards `GSTACK_IOS_LAUNCH_ENV` to
`xcrun devicectl device process launch --environment-variables` whenever it
launches the app under test. The value must be a JSON object whose keys are
environment variable names and whose values are strings, and it may not set a
`GSTACK_` variable (that namespace belongs to the debug bridge). Anything else
(invalid JSON, an array, a number value, a `GSTACK_` key) refuses the launch,
because launching without the variables an env-gated debug bridge needs would
look like a working app with no bridge. The detail names the key and its type,
never a value. Added in the release after v1.91.101.0.

**Fix.** In the shell that starts the daemon (macOS Terminal or Claude Code on
the Mac with the device):

```bash
export GSTACK_IOS_LAUNCH_ENV='{"DEBUG_BRIDGE":"1"}'
```

or `unset GSTACK_IOS_LAUNCH_ENV`, then restart `gstack-ios-qa-daemon`.

<a id="outside-voice-unavailable"></a>
### `Outside voice unavailable: <cause>. Fix: <fix>. Continuing to ... (OUTSIDE_VOICE_UNAVAILABLE)`

**Meaning.** `/plan-ceo-review`, `/plan-eng-review` or `/plan-devex-review` ran
without a second opinion. The outside provider (Codex, or Claude Code under the
Codex host) did not run or failed, and the native fallback could not supply a
bounded review either. That fallback dispatches the built-in Plan subagent in
the background next to a five-minute background timer, and stops whichever is
still running when the other ends. The cause names which part was missing:
`Plan agent type not offered`, `TaskStop not offered`, `background tasks
unavailable`, `no complete report within five minutes`, or a failed status.
The review-log row carries the same cause as `unavailable_reason`. Claude Code
2.1.277 removed the TaskOutput tool the fallback used before, so on older
gstack every native fallback on current Claude Code ended here.

**What is kept.** The native plan review itself is complete. The row is
recorded with `status: unavailable`, never as a clean review; a late or partial
reviewer result is not counted.

**Fix.** Repair the provider the line names: install it, or run `codex login`
(in your terminal or Git Bash). For the native fallback, run Claude Code 2.1.277
or later with background tasks enabled (`CLAUDE_CODE_DISABLE_BACKGROUND_TASKS`
unset, not in bare mode). Then re-run the review.

**Expected result.** An `OUTSIDE VOICE (...)` report, or `CODEX SAYS (plan
review — outside voice)` when the provider runs.

<a id="artifact-machine-path"></a>
### `ARTIFACT_MACHINE_PATH`

**Meaning.** A public copy of an autoplan run still contains a path the run
recorded on this machine: its run directory, the home directory, the plan's
directory, the checkpoint directory or the worktree root. `gstack-artifact
validate --public <dir> --private <run>/run.json` reports each hit with
file:line; `gstack-autoplan export --public` runs that check on a staging copy
and writes nothing when it fails.

**Fix.** Export with `gstack-autoplan export --out <run> --public <dir>`, which
rewrites recorded roots to repo-relative paths or `<local notes (not
committed)>`. Export never rewrites inline code or fenced blocks in plan.md, so
a hit there needs a plan edit: change the path, `revise`, and export again.
Generic home-directory paths that are not recorded roots are WARN lines, not
errors.

<a id="artifact-public-target-exists"></a>
### `ARTIFACT_PUBLIC_TARGET_EXISTS`

**Meaning.** `gstack-autoplan export --public <dir>` found files in `<dir>`
that are not an earlier public copy of the same run, and refused to overwrite
them.

**Fix.** Pass an empty or new directory, or the directory that already holds
this run's public copy (it is replaced as a whole).

<a id="prereg-diagnostic-untested"></a>
### `PREREG_DIAGNOSTIC_UNTESTED`

**Meaning.** `gstack-eval-plan prereg --check <file> --allow-repo-commands` ran
the preregistration's declared summarizer (`## Diagnostics`: `summarizer:`,
`fixture:` and one `| diagnostic | expected |` row each) on its synthetic
fixture. Its result did not match the preregistered definitions: a count
differed (`mismatch`), a declared diagnostic was absent (`missing`), it
reported one nobody preregistered (`undeclared`), or the summarizer failed,
timed out, or did not end its stdout with one JSON object of counts. Each
`PREREG_DIAGNOSTIC:` line names one diagnostic. This is the gbrain-evals #162
(D7) shape, where two diagnostic counts needed a post-paid amendment.

**Fix.** Fix the summarizer, or correct the definition (the expected count or
the fixture), until every line says `ok`. Then commit the freeze. The
`PREREG_DIAGNOSTICS:` line's `sha256` binds the fixture you tested. Without
`--allow-repo-commands`, the command lists the summarizer
(`PREREG_COMMAND:`) and exits 3 (`REPO_COMMANDS_NOT_ALLOWED`), because the
summarizer is a repository command.

<a id="eval-models-invalid"></a>
### `EVAL_MODELS_INVALID`

**Meaning.** `.gstack/eval-models.json` could not be read or failed
validation. Causes include JSON errors, `schema_version` other than 1, a
missing or empty `allow`, an unknown key or scope, a glob in `families`, an id
in two families, or a family that lists gstack's current catalog model after an
older id. It also fires when `origin/<base>` cannot be resolved while a
working-tree copy exists. While the rules are invalid, no arm passes.

**Fix.** Correct the file as the line says (`docs/eval-models.md`) in a
reviewed PR, or fetch the base branch. To test an unmerged edit, use
`--models-from head`.

<a id="eval-model-denied"></a>
### `EVAL_MODEL_DENIED`

**Meaning.** An arm's model matched `deny` or its scope's `deny`, matched no
`allow` entry (unknown ids fail closed), or matched no entry of its scope's
`allow` list. The `EVAL_MODEL:` line names the rule.

**Fix.** Pick a model the rules allow for that scope. For a smoke run, pass
`--scope smoke` (`price-gate` uses each call row's scope). To change the rule,
edit `.gstack/eval-models.json` in a reviewed PR.

<a id="eval-model-old-generation"></a>
### `EVAL_MODEL_OLD_GENERATION`

**Meaning.** The rules declare `families` (newest first), and an arm uses an id
that is not the first one in its family.

**Fix.** Use the family's newest id, which the `EVAL_MODEL:` line names. If the
order is wrong, fix `families` in a reviewed PR.

<a id="eval-model-generation-unresolved"></a>
### `EVAL_MODEL_GENERATION_UNRESOLVED`

**Meaning.** The rules declare `families`, so every arm must be its family's
newest generation. This arm's model is in no family, so its generation cannot be
checked, and the arm fails instead of passing unchecked.

**Fix.** Add the model to its family (newest first) in
`.gstack/eval-models.json` in a reviewed PR, or use a model a family lists.

<a id="wtree-unavailable"></a>
### `gstack-pregate: cannot fingerprint the working tree: bin/gstack-wtree could not start (on Windows, no Git Bash was found) or it ran and failed (<detail>); fix: <fix> (WTREE_UNAVAILABLE)`

**Meaning.** `gstack-pregate` fingerprints the working tree with
`bin/gstack-wtree` before any check runs, and refuses (exit 3) when it cannot.
There are two causes, and the line says which:

- **It could not start.** On Windows no Git Bash was found to run the script.
  The detail lists every candidate tried with the reason it was rejected
  (`GSTACK_GIT_BASH (unset): not set; git --exec-path …; install path …;
  PATH bash: …`), in the order [`BASH_UNAVAILABLE`](#bash-unavailable)
  describes. On macOS or Linux it means `bin/gstack-wtree` is missing.
- **It ran and failed.** The detail is the script's own message, and the fix
  is the repair it printed, for example `set TMPDIR to a writable directory`.

Before this, both cases were reported as `policy source unavailable:
origin/<base> is not a resolvable commit` with `git fetch` as the fix, which
changed nothing.

**Fix.** Run the fix the line prints. For the Windows case, point gstack at
Git Bash's `bash.exe`, then rerun `gstack-pregate`:

- Git Bash (this shell only): `export GSTACK_GIT_BASH='C:/Program Files/Git/bin/bash.exe'`
- Windows PowerShell 5.1 or PowerShell 7 (this shell only):
  `$env:GSTACK_GIT_BASH = 'C:\Program Files\Git\bin\bash.exe'`

To set it for good (Claude Code reads it on its next start), follow the
recipes under [`BASH_UNAVAILABLE`](#bash-unavailable), or install Git for
Windows (`winget install --id Git.Git -e` in PowerShell).

**With `--json`.** Every refusal before a check runs (this one, an
unavailable base, an invalid pin file) is one JSON object on stdout,
`{"ok":false,"status":"refused","code":"WTREE_UNAVAILABLE","detail":"…","fix":"…","docs":"…#wtree-unavailable"}`,
with exit 3. A run's object carries the same `ok` and `status`
(`complete` or `incomplete`), so `status` tells a refusal from a run. The
`GSTACK_RESULT:` line goes to stderr under `--json`.

<a id="claude-md-skill-list"></a>
### `warn CLAUDE.md the gstack section in <file> lists <n> skills; Claude Code lists installed skills itself, and a pasted list goes stale with each release`

**Meaning.** `gstack-doctor` found a gstack section in `~/.claude/CLAUDE.md`
or in this project's `CLAUDE.md` that enumerates skills: an `Available
skills:` line, or eight or more `/skill` names. Older install prompts asked
for that list (#3169). Claude Code already lists every installed skill with
its description, and a pasted list goes stale with each release, so the agent
can take a partial list as the complete set.

**Fix.** Replace the section with the short block the doctor prints (no skill
list; keep any other gstack rules you wrote yourself):

```
## gstack
Use /browse from gstack for all web browsing. Never use mcp__claude-in-chrome__* tools.
```

**Expected result.** The next `gstack-doctor` run shows
`ok CLAUDE.md no gstack section lists skills (...)`.
<a id="policy-gstack-too-old"></a>
### `POLICY_GSTACK_TOO_OLD`

**Meaning.** `.gstack/ship-policy.json` on the base branch sets
`min_gstack_version` above the gstack reading it. The policy uses keys this
gstack would read differently or not at all, so every ship-policy reader
(`gstack-restamp`, `gstack-tree-receipt`, `gstack-ship-queue`,
`gstack-ship-policy`) refuses it instead of guessing. A gstack older than
`min_gstack_version` itself sees that key as unknown and fails with
`POLICY_INVALID`, which names the key.

**Fix.** Upgrade gstack to the version the message names
(`bin/gstack-upgrade`, or rerun the session install), then rerun. A crew lead
raising `min_gstack_version` raises the crew's install floor at the same
time; `gstack-ship-policy validate` prints `MIN_READER:` for exactly that.

<a id="queue-not-ready"></a>
### `QUEUE_NOT_READY`

**Meaning.** `gstack-ship-queue ready` will not print a READY block the
coordinator could misread: the working tree has uncommitted tracked changes,
HEAD is not the PR's pushed head (read through `gh pr view`), CI at that
exact head is not green (failed, pending or unreadable), or the pregate result
is missing, failed or recorded on another tree (`PREGATE_STALE`).

**Fix.** Commit and push, wait for CI on that head, rerun
`gstack-pregate run --allow-repo-commands` when the tree changed, then rerun
`gstack-ship-queue ready --pr <n>`. The block it prints before refusing shows
which line is not yet true.

<a id="queue-proof-missing"></a>
### `QUEUE_PROOF_MISSING`

**Meaning.** A queue step lacks an input it needs to prove its claim, or an
input does not match: the gated head is not a commit here, HEAD differs from
the gated head beyond stamps (the gate never covered this tree), an earlier
stamp with other inputs is unfinished, the stamp journal's head moved, or a
gate-ahead merge could not be recomputed with `git merge-tree`. Nothing was
written unless the `QUEUE_STAMP_REFUSED:` line says `committed=yes`.

**Fix.** Supply the named input (fetch the gated head, pass the current base
sha), or regate the tree you mean to stamp. For an unfinished stamp, rerun the
identical command to resume, or revert its files and delete
`.gstack/tmp/ship-queue/stamp-<pr>.json`.

<a id="queue-stamp-not-stamp-only"></a>
### `QUEUE_STAMP_NOT_STAMP_ONLY`

**Meaning.** `gstack-ship-queue stamp` committed the stamp, and the tree
receipt between the gated head and the stamped head found a difference
outside the stamp rules (the residual paths are printed). The gate's result
does not cover that head. The refusal line says `committed=yes <sha>`.

**Fix.** Inspect the residual paths: drop the stray edit and stamp again, or
run the gate on the stamped head.

<a id="queue-verify-mismatch"></a>
### `QUEUE_VERIFY_MISMATCH`

**Meaning.** The coordinator's `gstack-ship-queue verify` could not
reproduce the lane's claim from the PR's pushed commits: the head moved, the
head differs from the gated tree beyond stamps, the receipt digest differs
from the one in `QUEUE_STAMP`, or, for a gate-ahead record, `git merge-tree
--write-tree` gives another merge tree, the recorded stamp patch does not
rebuild the recorded gated tree or changes more than stamps, or the
predecessor PR moved after the gate.

**Fix.** Do not merge. Ask the lane to rerun `gstack-ship-queue stamp` (or
`gate-ahead`) on the current queue and report again.

<a id="queue-gate-missing"></a>
### `QUEUE_GATE_MISSING`

**Meaning.** The ship policy sets `full_e2e: true`, and no passing full-gate
result is bound to the tree being stamped or verified: no recorded gate-ahead
attempt for that gated head, no `--gate-exit 0 --gate-log <file>` from a run
on it, or the recorded run exited non-zero.

**Fix.** Run the gate the policy's `gate_command` names in the gate-ahead
worktree and bind it with `gstack-ship-queue gate-ahead --record`, or pass the
exit code and log of a passing run on the gated head to `stamp`.

<a id="gate-ahead-attempt-invalid"></a>
### `GATE_AHEAD_ATTEMPT_INVALID`

**Meaning.** `gstack-ship-queue gate-ahead --record` could not bind the gate
result: the attempt id is unknown for that PR, the attempt already holds a
different result, the log file is missing, or the attempt's worktree no longer
holds the gated commit (its HEAD moved or a tracked file changed), so the
result would not describe the gated tree.

**Fix.** `gstack-ship-queue gate-ahead --list --pr <n>` shows every attempt
and the current one. Record the live attempt, or prepare a new one with
`gate-ahead --after <pr>` and run the gate there without editing tracked
files.

<a id="queue-train-off"></a>
### `QUEUE_TRAIN_OFF`

**Meaning.** A merge-train command (`train …` or `verify --train`) ran
against a base revision whose `.gstack/ship-policy.json` declares no `train`
block, so the train surface is off and the per-PR queue applies. Nothing was
written.

**Fix.** Use the per-PR queue (`ready --pr <n>`, `stamp`, `verify`), or land
a `train` block with `min_gstack_version` on the base branch first
([Run a merge train](ship-policy.md#run-a-merge-train)).

<a id="queue-train-untrusted"></a>
### `QUEUE_TRAIN_UNTRUSTED`

**Meaning.** A pinned PR's head repository is not the base repository. The
train branch and its dispatches run with repository secrets, so fork work
never rides a train.

**Fix.** Run the printed `train build --prs <list without it>`; the fork PR
stays on the trusted-branch path.

<a id="queue-train-moved"></a>
### `QUEUE_TRAIN_MOVED`

**Meaning.** A PR's head is no longer the SHA the train pinned (at build, or
past its pin beyond stamps at verify), so the train would not test what
merges. At verify after earlier slots merged, the queue also freezes
(`QUEUE_TRAIN_FROZEN`).

**Fix.** Ask the lane for a fresh READY on the new head, then build the train
with the new pin (`train build --prs <n>@<new sha>,…`).

<a id="queue-train-conflict"></a>
### `QUEUE_TRAIN_CONFLICT`

**Meaning.** Merging a PR onto the prefix before it conflicts outside the
version files and the CHANGELOG. The `QUEUE_TRAIN_CONFLICT:` line names the
PR, the conflicting files and the PRs merged before it. Nothing was
dispatched and no branch was pushed.

**Fix.** Run the printed `train build --prs <list without that PR>`. The PR's
lane merges main (with the earlier PRs once they land) and reports READY
again.

<a id="queue-train-free-red"></a>
### `QUEUE_TRAIN_FREE_RED`

**Meaning.** The free tests dispatched on `train/<nonce>` are red, cancelled,
missing (no `workflow_dispatch` run appeared before `--free-timeout`) or ran
on another SHA, so the paid gate was not dispatched.

**Fix.** Read the free-tests run. A PR-caused red drops that PR (`train build
--prs <list without it>`); a flaky test goes to its owner before the next
build.

<a id="queue-train-dispatch-unknown"></a>
### `QUEUE_TRAIN_DISPATCH_UNKNOWN`

**Meaning.** A train dispatch was attempted, but no run carrying its nonce
appeared, so whether it started is unknown (`gh workflow run` can fail after
GitHub accepted the dispatch). It is never dispatched again blindly.

**Fix.** Run `gstack-ship-queue train status --train <nonce>`. It adopts the
run carrying the nonce, or marks the dispatch absent; only then does
`train build --train <nonce>` dispatch it again, under the same nonce.

<a id="queue-train-waiting"></a>
### `QUEUE_TRAIN_WAITING`

**Meaning.** The train has fewer PRs than `train.max_size` and its oldest
READY PR has waited less than `train.fill_hours`, so it does not dispatch
yet. The message prints when it will.

**Fix.** Add READY PRs, rerun after the printed time, or pass `--urgent` for a
one-PR train.

<a id="queue-train-pending"></a>
### `QUEUE_TRAIN_PENDING`

**Meaning.** The train's run (free tests, the full gate or the bisect) has
not finished, so there is no verdict yet.

**Fix.** Rerun the printed `NEXT:` command later. Nothing is dispatched again
while a run is pending.

<a id="queue-train-incomplete"></a>
### `QUEUE_TRAIN_INCOMPLETE`

**Meaning.** The train gate did not complete its census: INFRA or INCOMPLETE
panels, an unbound, partial or cancelled shard, a slice killed before its
upload, a record bound to another nonce, head or tree, or no published
record. An incomplete gate is never green.

**Fix.** When every gap is machine-classified INFRA or INCOMPLETE, take the
one re-dispatch EVAL_POLICY.infraRedispatch allows (`train rebuild --train
<nonce> --infra`) and report both runs. Otherwise diagnose the run.

<a id="queue-train-red"></a>
### `QUEUE_TRAIN_RED`

**Meaning.** The train's full gate is red on the train tree; the message names
the red cases. Its PRs do not merge, and nothing is retried to change the
verdict.

**Fix.** Bisect the red cases (`train bisect --train <nonce> --spend-cap
<usd>`). After a rebuild's second red, route the cases to a repair lane.

<a id="queue-train-red-on-main"></a>
### `QUEUE_TRAIN_RED_ON_MAIN`

**Meaning.** The bisect found the red cases red on every prefix, main (T0)
included: main is broken, not the train's PRs.

**Fix.** Fix forward on main first (a one-PR train), then rebuild this train
unchanged.

<a id="queue-train-unattributed"></a>
### `QUEUE_TRAIN_UNATTRIBUTED`

**Meaning.** The bisect pattern blames no PR and not main: all green, or not
monotone. One trial per prefix cannot tell a flake from a break.

**Fix.** All green: the one preregistered rebuild (`train rebuild --train
<nonce>`), reporting both runs. Any other pattern: a repair lane, then a
changed train once the repair merges.

<a id="queue-train-bisect-capped"></a>
### `QUEUE_TRAIN_BISECT_CAPPED`

**Meaning.** The bisect's reserved price (every case×prefix trial, trials
without cost data at `train.trial_reservation_usd`) passes `--spend-cap`.
Prefixes that fit were launched, completed prefixes are kept, and the
outcome stays unattributed; it is never green.

**Fix.** Resume with a higher cap (`train bisect --train <nonce> --spend-cap
<usd>`). Only prefixes without a result run.

<a id="queue-train-prefix-invalid"></a>
### `QUEUE_TRAIN_PREFIX_INVALID`

**Meaning.** A bisect prefix is not an ancestor of the train head on
`train/<nonce>` (the branch moved), or a red case is not in the gate's plan,
so the bisect inputs are refused before any dispatch.

**Fix.** Check that `train/<nonce>` still points at the recorded head
(`train status`). A moved branch needs a new train.

<a id="queue-train-rebuild-refused"></a>
### `QUEUE_TRAIN_REBUILD_REFUSED`

**Meaning.** `train rebuild` is not allowed: there is no bisect record (or,
with `--infra`, no INFRA/INCOMPLETE-only census), the bisect was not all
green, or the train was already rebuilt or re-dispatched once.

**Fix.** Route the red cases to a repair lane; the train is rebuilt only once
the repair merges (a changed train).

<a id="queue-train-tree-mismatch"></a>
### `QUEUE_TRAIN_TREE_MISMATCH`

**Meaning.** Main's tree is neither the train's prefix before this PR nor the
one after it, modulo stamps, so the merge would not publish what the gate
tested.

**Fix.** Stop merging. If earlier PRs of the train merged, the queue is now
frozen (`QUEUE_TRAIN_FROZEN`); otherwise build a new train on current main.

<a id="queue-train-frozen"></a>
### `QUEUE_TRAIN_FROZEN`

**Meaning.** A train stopped partway through publication, so main holds a
prefix no gate covered on its own. The `QUEUE_TRAIN_FROZEN:` line lists the
merged PRs, main's tree and the backstop run dispatched on main's SHA. The
freeze lives in local state and on `refs/notes/gstack-trains`. Ordinary
trains and other trains' merges are refused until a repair lands.

**Fix.** Admit one repair PR at its exact head (`train build --repair --prs
<n>@<sha>`). The freeze clears when verify finds main's tree after that merge
in a green record; `NEXT:` then builds a train of the PRs still unmerged.

<a id="queue-receipt-missing"></a>
### `QUEUE_RECEIPT_MISSING`

**Meaning.** The PR body carries no valid ```gstack-ship-receipt``` block, so
/ship never ran on this branch (or its receipt was lost when the body was
rewritten). `gstack-ship-queue ready` refuses to READY it, `train build`
refuses the pin by PR number before any write, push or dispatch (dry run
included), and `verify --train` refuses the slot. The block still prints the
informational `SHIP_RECEIPT: none in the PR body` (or `invalid`) line. There
is no flag that skips this check (Garry, 2026-10-25: use the gstack ship skill
before merging PRs; [ship-policy.md](ship-policy.md#ship-before-ready)).

**Fix.** Run /ship on the branch. Unattended, it ends by writing the receipt
into the PR body (`gstack-ship-receipt write --pr <n> … --body <file>`, then
`gstack-post pr-body`) when an open PR exists for the branch at HEAD;
otherwise it leaves the receipt in `.gstack/tmp/ship-receipt.md` and the
parent posts it ([unattended.md](unattended.md)). Then rerun
`gstack-ship-queue ready --pr <n> --screen|--no-screen` and send the new READY
block.

<a id="queue-receipt-stale"></a>
### `QUEUE_RECEIPT_STALE`

**Meaning.** The PR body's ship receipt is valid but names another head than
the one being READY'd or merged (a push after /ship, a receipt copied from
another PR, or a `pr` field for another PR), so the receipt does not cover
what would merge. The one accepted difference is a train slot's stamp: when
the current head is the pinned head's stamp commit (same tree modulo stamp
files, or the pin with main merged in at slot 2 and later), the receipt
written for the pinned head is the binding one and `verify --train` accepts it.

**Fix.** Rerun /ship on the current head so the receipt names it, then rerun
`gstack-ship-queue ready --pr <n> --screen|--no-screen`. A lane never stamps
to fix this: the stamp comes only when the slot is called.

<a id="queue-screen-stale-ref"></a>
### `QUEUE_SCREEN_STALE_REF`

**Meaning.** `gstack-ship-queue ready --screen` dispatches the screen against
GitHub's `refs/pull/<n>/merge`, and that ref is missing or still merges an
older head than the PR's pushed head. GitHub stops recomputing the merge ref
while the PR conflicts with the base (a CHANGELOG-only conflict after a stamp
counts), so a screen dispatched there checks out the old merge, sees itself
superseded, plans 0 cases and reports success. GSTA-95 hit this on #3431:
`ready` printed `SCREEN_DISPATCH:` as if a screen ran. `ready` now compares
the merge ref's second parent with the PR head before dispatching, and a
finished screen that planned no cases is never adopted as a screen. A screen
run uploads no train record, so the evidence is its plan: a superseded run
skips `plan-slices` and uploads no `paid-plan` artifact, and a manifest with
nothing planned counts the same. `ready --screen` dispatches a fresh one and
`train build` prints `SCREEN: #<n> run <id> planned no cases (no paid-plan
artifact; …)` or `… planned no cases (an empty plan manifest; …)`, each
ending `; counted as not-run, the slot rides unscreened`. A plan it cannot
read (`… paid-plan artifact has expired`, `… manifest.json is unreadable`, an
unreadable run or artifact list, an unreadable repository slug, or a READY
whose run id is not a number) keeps the slot screened and prints
`SCREEN: #<n> <reason>; counted as screened, unverified`; `ready --screen`
follows such a run. When `ready` cannot list the remote's refs or fetch the
merge ref at all, it refuses with the same code and a `could not list …` or
`could not fetch …` message whose NEXT line says to check the remote, not to
resolve a conflict.

**Fix.** Resolve the conflict with the base branch (or wait for GitHub to
recompute the merge ref), push, and run `gstack-ship-queue ready --pr <n>
--screen` again. Under crew rule 14 a CHANGELOG-only conflict is left to the
train, so a lane that cannot get a fresh merge ref READYs `--no-screen` only
after its own focused paid cases passed (rule 6).

<a id="ready-screen-choice-required"></a>
### `READY_SCREEN_CHOICE_REQUIRED`

**Meaning.** The base policy turns trains on, so READY needs an explicit
screen choice: `--screen` (pay for a screen on the PR's merge SHA now) or
`--no-screen`. The `SCREEN:` lines show the selection and the recommendation.

**Fix.** Rerun `gstack-ship-queue ready` with the printed recommendation. A
lane that already ran focused local cases says so in the READY block and may
pass `--no-screen`.

<a id="pregate-timing-assertion"></a>
### `PREGATE_TIMING_ASSERTION`

**Meaning.** A test line the branch added or changed compares an elapsed
wall-clock or CPU time against a bound, or sleeps for a fixed time and then
asserts. Under machine load such a test fails without a code change. The
`timing` check warns; it does not block (the measurement is in
[docs/pregate.md#timing](pregate.md#timing)).

**Fix.** Assert on the outcome instead: an injected clock, a forced deadline,
an event or a poll with a deadline. When the bound is the contract, add
`gstack-timing-ok: <reason>` in a comment on the line or the line above. Never
raise a bound to make a flake pass; /investigate's flake playbook covers the
diagnosis.

<a id="approval-classes-invalid"></a>
### `APPROVAL_CLASSES_INVALID`

**Meaning.** The `.gstack/approval-classes.json` committed on the base branch
(or, for `gstack-approval-classes validate`, the working-tree copy) is not
valid JSON, has an unknown key, a class without a name or anything to match,
or a glob that escapes the repository. `gstack-ship-receipt write` refuses
rather than ship with the classes unchecked.

**Fix.** Run `gstack-approval-classes validate`, correct the file, and merge
it. See [Approval classes](ship-policy.md#approval-classes).

<a id="approval-class-found"></a>
### `APPROVAL_CLASS_FOUND`

**Meaning.** `gstack-approval-classes check` found changes a declared class
covers. Each `APPROVAL_CLASS:` line names the class and file:line, and each
`APPROVAL_SCOPE: <class>@<digest12>` line is the token an approval binds to.
Report-only lines from built-in detectors do not set this code.

**Fix.** Ask the owner, then add
`Approved by <owner> <YYYY-MM-DD> via <ref> for <class>@<digest12>` to the PR
body. The token changes whenever an effect is added, removed or edited, so a
later change needs a new approval.

<a id="approval-citation-missing"></a>
### `APPROVAL_CITATION_MISSING`

**Meaning.** `gstack-ship-receipt write` found a declared approval class with
no citation that both resolves and binds to the current effects, and wrote no
receipt. The line lists every candidate citation and why it did not count:
the plan's autoplan gate is not APPROVED, the comment is not by a ship-policy
maintainer or not by the cited owner, the evidence names neither the scope
token nor the class with every effect path (an approval of other work, or one
given before an effect was added), or an unresolvable reference lacks a
matching `for <class>@<digest12>` attestation.

**Fix.** Cite the approval: a plan sha with `--approval-run <run dir>`, or the
URL of a maintainer's comment or review that names the token. For evidence
gstack cannot read (a thread code, a chat message), attest which scope it
covers with `for <class>@<digest12>`; the receipt records it as
`citation: unverified` for the coordinator.

<a id="approval-source-unavailable"></a>
### `APPROVAL_SOURCE_UNAVAILABLE`

**Meaning.** `origin/<base>` does not resolve, so the committed approval
classes cannot be read. `check` exits 3; `gstack-ship-receipt write`
records `approval.status: unavailable` and prints `approval=unchecked`.

**Fix.** `git fetch origin <base>` and rerun. The working-tree copy is never
used.

<a id="state-matrix-incomplete"></a>
### `STATE_MATRIX_INCOMPLETE`

**Meaning.** `gstack-state-matrix check` read the state-machines specialist's
output and found a gap: a kind × owner action pair with no row, a row with no
resulting row, a test reference that does not exist in the checkout, or an
untested cell without a CRITICAL finding. A review whose matrix is incomplete
has incomplete coverage, never a clean result.

**Fix.** Rerun the state-machines specialist on the same diff and check its
output again.

## gstack-error-capture

`gstack-error-capture` runs one target CLI for `/devex-review` Step 3 with no
terminal, a scrubbed environment and a private temporary HOME, and prints one
redacted JSON record. Its own failures print one stderr line,
`gstack-error-capture: <what>; fix: <fix> (<CODE>)`, and no record. Exit 2 is a
usage error, 3 a refusal, 1 a helper failure. `gstack-error-capture --help` lists
every flag and code.

<a id="dx-capture-usage"></a>
### `gstack-error-capture: ... (DX_CAPTURE_USAGE)`

**Meaning.** Gstack-error-capture arguments are malformed: an unknown flag, a flag missing its value, no `--`, or no command after it. Exit 2.

**Fix.** Rerun as `gstack-error-capture [--deadline <s>] [--max-bytes <n>] [--pass-env NAME,...] [--copy-config <path>] [--cwd <dir>] [--approved] [--launch-check] -- <cmd> [args]`: flags before `--`, the command and its arguments after it.

<a id="dx-capture-bad-deadline"></a>
### `gstack-error-capture: ... (DX_CAPTURE_BAD_DEADLINE)`

**Meaning.** --deadline is not a positive number of seconds (at most 3600, up to 3 decimals). Exit 2.

**Fix.** Rerun with `--deadline 20`.

<a id="dx-capture-bad-max-bytes"></a>
### `gstack-error-capture: ... (DX_CAPTURE_BAD_MAX_BYTES)`

**Meaning.** --max-bytes is not an integer from 1 to 1048576. Exit 2.

**Fix.** Rerun with `--max-bytes 65536`.

<a id="dx-capture-bad-pass-env"></a>
### `gstack-error-capture: ... (DX_CAPTURE_BAD_PASS_ENV)`

**Meaning.** --pass-env names an invalid or unset variable, or one the containment owns (PATH, HOME, XDG_CONFIG_HOME, TERM, USERPROFILE). Exit 2.

**Fix.** Rerun with `--pass-env NAME with NAME set in the calling environment`.

<a id="dx-capture-bad-cwd"></a>
### `gstack-error-capture: ... (DX_CAPTURE_BAD_CWD)`

**Meaning.** --cwd is not an existing directory. Exit 2.

**Fix.** Rerun with `--cwd <existing directory> --approved`.

<a id="dx-capture-approval-required"></a>
### `gstack-error-capture: ... (DX_CAPTURE_APPROVAL_REQUIRED)`

**Meaning.** --pass-env, --copy-config or --cwd was given without --approved; they hand the target credentials or real files. Exit 3.

**Fix.** Ask the user to approve the named variables, files or directory, then add --approved.

<a id="dx-capture-config-refused"></a>
### `gstack-error-capture: ... (DX_CAPTURE_CONFIG_REFUSED)`

**Meaning.** --copy-config names a missing file, a symlink, a non-regular file, a path outside HOME, a duplicate, or a file over 1 MiB. Exit 3.

**Fix.** Rerun with `--copy-config <regular file under $HOME, no symlinks>`.

<a id="dx-capture-not-found"></a>
### `gstack-error-capture: ... (DX_CAPTURE_NOT_FOUND)`

**Meaning.** The command does not resolve to an executable file; the record carries launch "not_found" and nothing ran. Exit 1.

**Fix.** Install the command or pass its absolute path after --.

<a id="dx-capture-temp-dir"></a>
### `gstack-error-capture: ... (DX_CAPTURE_TEMP_DIR)`

**Meaning.** The private 0700 containment directory under the gstack state root could not be created. Exit 1.

**Fix.** Make $GSTACK_STATE_ROOT/error-capture a writable directory you own (not a symlink), then rerun.

<a id="dx-capture-containment-unavailable"></a>
### `gstack-error-capture: ... (DX_CAPTURE_CONTAINMENT_UNAVAILABLE)`

**Meaning.** Process-group or Windows job containment is unavailable on this platform; nothing ran. Exit 1.

**Fix.** Run the capture on Linux, macOS or Windows with job objects available.

<a id="dx-capture-supervisor-failed"></a>
### `gstack-error-capture: ... (DX_CAPTURE_SUPERVISOR_FAILED)`

**Meaning.** The deadline supervisor failed before reporting a result. Exit 1.

**Fix.** Rerun the same command once; if it repeats, run bin/gstack-qa-deadline --help to check the supervisor.

<a id="dx-capture-interrupted"></a>
### `gstack-error-capture: ... (DX_CAPTURE_INTERRUPTED)`

**Meaning.** The helper received SIGINT, SIGTERM or SIGHUP; the target group was killed and no record was printed. Exit 1.

**Fix.** Rerun the same command without interrupting it.

<a id="dx-capture-redaction-failed"></a>
### `gstack-error-capture: ... (DX_CAPTURE_REDACTION_FAILED)`

**Meaning.** The finished record still matched a secret check, so nothing was printed. Exit 1.

**Fix.** Do not rerun with more --pass-env; report the command name to the gstack maintainers.

<a id="dx-capture-internal"></a>
### `gstack-error-capture: ... (DX_CAPTURE_INTERNAL)`

**Meaning.** Unexpected helper failure; the line names the error class and its first stack frame. Exit 1.

**Fix.** Rerun once; if it repeats, report the printed frame to the gstack maintainers.