Downscaled a Gemini original to 0.57 and 1.40 MP and ran the deployed worker on
both, so the profile applied its own low-end strengths of 0.0896 and 0.1066. Both
come back clean in the Gemini app.
That rules out the failure mode the ladder raised: 0.08 failed at 4.33 MP, and the
curve sends sub-1 MP images to 0.084-0.094, which looked like it might mean small
Gemini uploads were under-processed in production. They are not, at these sizes.
Written as validation of the shipped curve rather than as evidence that the
boundary moves with resolution. 0.0896 sits inside the untested gap at 4.33 MP,
where only 0.08 and 0.10 were probed, so it may clear at both sizes; the direction
of any resolution dependence stays unproven. These are also downscales rather than
natively small Gemini outputs, which remain untested.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The document asserted it in two places and recommended capping Gemini at 1536
with 0.30, or native-calibrating to ~0.35+. Nothing measured that, and the one
relevant measurement points the other way: the 2026-06-14 deployed-worker re-test
cleared Gemini at 0.15 on two NATIVE 2816x1536 images, the same rung as capped
1536. The document already recorded that as contradicting the "native >= 0.30"
guess, then kept the guess anyway in the historical-certification paragraph and
restated it as fact in the strength floors.
Replaced with what was measured, plus an explicit statement that the direction is
unproven and the low-resolution end has never been through the Gemini oracle on
any pipeline.
Also removes the same appeal from the qwen-zimage denoise-boundary note added
earlier in this branch, which had used the unproven trend as reassurance that the
bottom of the adaptive curve is safe. It is not reassurance; it is an open
question, and it is now written as one.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A ladder on one native 2816x1536 Gemini original at seed 0, verified through the
Gemini app, puts the boundary between 0.08 and 0.10: 0.154, 0.12 and 0.10 read
clean, 0.08 reads SynthID FOUND. Fidelity rises monotonically all the way down,
so 0.10 buys +1.54 dB whole-image and +0.98 dB inside the face boxes over the
0.154 the profile ships for that size.
Recorded with the two constraints that stop it being acted on directly. It
brackets rather than calibrates - one image, one seed, and shipping the lowest
clean rung means shipping at the measured cliff edge. And the untested end is the
bottom, not the top: every Gemini oracle fixture is 2816x1536, so the Google-side
certification only ever covered 0.154, while the curve sends sub-1 MP images to
0.084-0.094. The resolution trend already recorded in this document says lower
processing resolution needs less strength, which is the shape the curve has, but
that is an inference and no small Gemini original has ever been through the
oracle. Downscaling is valid test material since SynthID survives it by design.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Both qwen-zimage stages prompt with module constants, and at CFG 1.0 DiffSynth's
PipelineUnitRunner reuses the positive embedding for the negative side rather
than encoding it, so exactly one embedding per stage is ever computed. Persist it
and neither text encoder has to be loaded at all.
Measured on an H100 volume: this drops 15.45 GiB (Qwen2.5-VL) and 7.49 GiB
(Z-Image) of an 87.6 GiB per-request read, worth a median 11.76 s and 4.10 s of
load time paired within five containers. A nine-face fixture returned
sha256 c8567e11077de32a both with and without the cache, so the output is
byte-identical and the provider-oracle clearance is untouched.
The cache key carries the cache version, model id, pipeline output params and the
exact prompt, so a model bump or a prompt edit recomputes instead of reading a
stale embedding. The write is atomic because a torn file must never read back as
a hit, and a miss after the text encoder was already dropped raises rather than
calling a model that is not loaded.
_model_cache_dir now prefers HF_HOME: on a scale-to-zero runner that is the only
persistently mounted path, so anything below it is re-derived every request. The
YuNet download follows the same root.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Port of the same change made on the v0.20.1 line, reapplied here because the
package layout moved under _internal/ in the meantime.
The mandatory Qwen stack was configured to offload to disk unconditionally.
DiffSynth implements that by dropping the weights to the meta device and
re-reading every parameter through its DiskMap on the next onload, and the
pipeline moves between text encoder, transformer and VAE on every pass, so
each generation paid a full model reload. That is the right trade on a
consumer card, where it is what makes a 20B model runnable at all, and pure
waste on a card that can simply hold the stack.
Residency is now resolved from total VRAM, mirroring how the optional
Z-Image face stack is already gated. Above the floor the config passes no
"disk" value anywhere, which is what actually disables the behavior:
DiffSynth latches disk_offload once from offload_dtype, so pointing every
device at CUDA while leaving the sentinel would keep both the meta-drop and
the re-read.
Measured on an H100: a warm global pass went from 37.3s at 0.8 GiB resident
to 2.2s at 28.7 GiB, with both stacks resident peaking at 48.0 GiB of 79.2.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
New engines, each calibrated on its TC260 USCC cohort and validated by a
full-corpus sweep (42009 files):
- runninghub: top-left corner (new corner="tl"), faint mid-gray text via
the new raw-grayscale "gray" detection front-end, anchor-position gate
- baidu: text-run-only template (pill is a bright-blob magnet), load-bearing
Doubao+Qwen rival margins, corner-extended footprint for the white tag
- liblib: bottom-center (new corner="bc"), Arial silhouette (font is the
discriminative lever against latin UI text), logo-extended footprint
Qingyan parked (no clean-arm separation at any render/box), MiniMax/Hailuo
parked (1 visible frame, the xinghui rule); silhouettes kept as starting
points.
Kling (USCC cohort 91110108335469089C, n=30): kling_engine.py, gate 0.35
(clean p99 0.304 / max 0.320), strict-only, unimodal 0.12/short on the
shared ladder, fitted locate box, no rival margin (crossfire 1/400 doubao
below gate, 0 jimeng, 0 clean), parity 9/9 detect->fill->re-detect.
Suppresses the jimeng pill like doubao/qwen. identify gains visible_kling.
Yuanbao: measured negative -- the two-line italic block does not separate
from clean corners on either front-end at any render/box/font setting;
the fitted recipe stays in render_vendor_silhouettes.py MARK_OPTS.
cat-logo: cohort has only 2 unique carriers, parked on evidence; the
draw_catlogo silhouette already separates (0.50 vs clean max 0.333), so
registration is a gate pick once more uniques arrive.
vendor_mark_calibrate: --fit-geometry takes locate-box overrides (two-line
marks were clipped by the inherited box) and the aspect sweep reaches 0.62.
Calibrated on the 117-frame TC260-producer cohort (vendor_cohort_harvest +
vendor_mark_calibrate, both committed here): per-mark 2-rung ladder
(0.78, 1.27) for the two measured size modes, fitted locate box (the mark
sits ~0.025 of the short side off the edge; doubao's box clipped the first
glyph), measured template aspect 0.26, gate 0.45 (clean p99 0.301).
Strict-only (the sub-gate band is non-Qwen banners), no rival margin
(0 cross-fires on 400 doubao / 298 jimeng / 286 clean frames).
83/83 real marks detector-clean after cv2 fill.
TextMarkConfig gains a per-mark ladder field; the shipped 3-rung default
is unchanged for every other mark.
The section had accumulated incremental edits: defects numbered out of order
(1, 2, 3a, 3, 5, 4), closed items mixed into the open table, and "what to do
next" spread across four subsections that partly repeated each other.
Now it opens with START HERE -- the prioritized next actions and the reason each
sits where it does -- followed by open defects only, renumbered 1-5. Closed items
move to their own subsection, keeping the faint-mask post-mortem because how it
escaped both parity and its own regression test is the instructive part.
Adds a table of the completed full runs with their artifacts and row counts, each
verified against the file on disk. That exists because the artifacts are the
answer to "did we actually cover X" -- relaunching a sweep costs hours and returns
nothing new, and this session nearly did exactly that before checking. It also
names the two fast confirmations (real_examples_e2e ~2 min, robustness_suite
~3 min) that a later change should run instead.
Adds invisible_engine.py:346 as an open defect: it still discards imwrite's
success flag, the same shape as the crash fixed in the previous commit.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The Tier E adversarial sweep (new, scripts/robustness_suite.py) drove the real CLI
over truncated, corrupt, zero-byte, absurdly-shaped and bomb inputs, unicode and
RTL paths, hostile output directories and concurrent runs. It found two crashes;
the /simplify review then reproduced a third and worse one.
1. A FAILED WRITE CRASHED ON THE SIZE REPORT. image_io.imwrite is contractually
non-raising and returns False, but write_bgr_with_alpha discarded that bool and
returned None, so no caller could tell a failed write from a successful one.
Every write site then ran output.stat() to print the size, so a read-only
destination died with a bare FileNotFoundError pointing at the stat rather than
the write. The fix is deliberately NOT uniform: single-image commands exit via
the new cli._write_output_or_exit; api._write_visible_result RAISES so a library
caller gets an accurate error instead of a confusing FileNotFoundError from the
downstream metadata strip; and the batch sites raise but never SystemExit,
because the batch loop counts per-image exceptions and aborting would kill the
whole run.
2. BATCH LOST DATA SILENTLY. Into a read-only output directory it wrote ZERO files
for 2 inputs and exited 0 -- no traceback, no error, an empty output directory a
wrapping service would read as a completed run. The robustness harness could not
see this class at all, since it scored exit codes and traceback markers and this
failure has neither; it now asserts on the artifacts written.
3. A DIRECTORY PASSED AS THE IMAGE crashed the metadata scanner with
IsADirectoryError, because click.Path(exists=True) accepts directories. Fixed
with dir_okay=False on all six source arguments, so argument parsing refuses it.
Also adds Tier B4 (scripts/resource_ceilings.py): peak RSS per fill backend from
1 MP to 25 MP, one fresh process per cell. migan 603->775 MB and lama 4679->4779 MB
are flat in input size, confirming the crop-around-the-mask design and both
documented figures; cv2 is the only backend that grows (74->440 MB, 5.9x). The
harness's own no-op check originally allocated a full-frame temp before reading
peak RSS and inflated the numbers with input size -- it now compares only the mask
box, and the conclusion survived re-measurement.
And scripts/real_examples_e2e.py, which drives every command over real corpus
examples and checks the outcome rather than the exit code: 6/6 provenance classes
identified, 10/10 metadata strips re-scan clean, all three fill backends write,
diffusion on MPS writes genuinely changed images. It records samsung as a real
partial (the faintest mark, 0.431 -> 0.404 against a 0.40 gate on the weakest of
its 3 corpus positives) and treats the gated pill's refusal to act as correct.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
The faint-mask fallback added for the tophat front-end thresholded the
max-normalized uint8 response at 0.5 -- which selects every non-zero pixel,
not "half the peak" as its comment claimed -- and filled ~120% of the corner
box on textured frames. Measured on 14 real faint-path frames (cv2 fill,
detector re-run after): the detector's own best-match box fills a 58.7%-median
corner box vs 120.9% for the threshold, both 100% detector-clean. Detection and
the mask now read one method, _tophat_best, whose score gates detection and
whose argmax box bounds the fill, so the two cannot drift by construction --
which is how the mismatch arose. The 0.5 constant is deleted.
Parity could not catch this (a mask that fills everything is trivially
detector-clean) and the regression test could not either: its flat fixture
gives every threshold the same box, so mutating the constant to 99.0 stayed
green. The fixture now carries texture and asserts the mask area is bounded,
not merely non-empty; it reproduces the corpus number (127% pre-fix).
Also lands the Tier B2 verification harnesses that found and bounded this:
- detector_response.py: response curves (detected AND maskable per cell); found
the size response is a comb, contrast is near-irrelevant, no unmaskable cells.
- ladder_headroom.py: measured that a denser scale ladder recovers 7.6% of
misses for a 2.52%->3.05% false-fire rise, and the one landscape rung that
helps is a geometry shift that helps and hurts equally (1.7:1) -- do not add.
- cjk_tail_probe.py: a generic shared-tail (AI生成) template does not separate
uncovered vendors from clean corners (0.407 vs clean p99 0.298).
Records the visible-parity re-run confirming the earlier front-end fix (doubao
91.8% -> 99.3%), and dedups the thrice-written stamp forward model into one
fill_quality.composite.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
